Co‐Conformational Distribution of Nanosized [2]Catenanes Determined by Pulse EPR Measurements

The co‐conformational ensembles of three differently sized [2]catenanes were studied by measuring pair correlation functions corresponding to the separation of nitroxide spin labels—one attached to each of the two macrocycles—with the double electron–electron resonance (DEER) experiment. A geometric model for the [2]catenanes was derived that approximates the macrocycles by circles and takes into account the topological constraint. Comparison of the experimental to the theoretically predicted pair correlation functions gives insight into the co‐conformational distribution and the size of the macrocycles. It was found that the macrocycles of the medium‐ and large‐sized catenanes in chloroform are close to fully expanded, while they are partially collapsed in glassy o‐terphenyl. For the small‐sized catenane, moderate interaction between the unsaturated sections of the macrocycles in chloroform is indicated by a slight overrepresentation of short label‐to‐label separations in the pair correlation function.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.     

Ab Initio High Pressure Investigations of InI

The high pressure behaviour of InI is studied by DFT‐calculations and compared with experimental data. The existence of a 5s² electron pair in In⁺ represents an unfavourable bonding situation for high symmetry structures because of effective closed shell repulsion. Since cations with a ns² electron pair are highly polarizable and the electronic situation is more favourable in the low symmetry structure InI prefers a TlI‐type structure at ambient pressure. A pressure induced transition to the more densely packed high symmetry CsCl‐type structure takes place at about 19 GPa according to our calculations. At ambient pressure the interactions are predominantly ionic. However with increasing pressure the distances between In⁺ cations in the TlI‐type structure diminish drastically, mainly due to the changing space requirement of the lone electron pair. Apart from ionic interactions further bonding interactions between the In⁺ cations occur. At elevated pressure the electron localization function (ELF) as well as the band structure diagrams suggest metallic bonding between the In⁺ within the zigzag chain, i. e. increasing bonding interactions between the In⁺ cations due to the electron pair and its s‐p‐mixing. At ambient pressure In‐In interactions are rather weak and the space requirement of the lone electron pair mainly determines the characteristic arrangement of the ions. At elevated pressure the In‐In interactions become stronger and stabilise themselves additionally the specific structural arrangement.     

New approaches to enantioselective fluorination: Cinchona alkaloids combinations and chiral ligands/metal complexes

The selective construction of carbon-fluorine bonds is of great interest to medicinal chemists because the replacement of a hydrogen or an oxygen atom with a fluorine atom in biologically active molecules can confer the molecules with improved physicochemical properties and biological activities. Since the first discovery of enantioselective fluorination using N-fluorocamphorsultam, our synthetic interest had been focused on the development of chiral N-fluorosulfonamide derivatives capable of enantioselective fluorination. However, these initial efforts revealed several limitations in both chemical yields and enantioselectivities of the fluorinated products. We present here the background of our personal story of the enantioselective fluorination reaction and some successful applications of the methods to the design and synthesis of biologically active products. Two novel approaches using cinchona alkaloid/Selectfluor^® combinations and chiral ligands/metal complexes have been pursued, respectively. In addition, the recent advances in this area by other groups are also described briefly.     

Microwave-assisted conversion of N-substituted oxazolidin-2,4-diones into α-hydroxyamides

N-Substituted oxazolidin-2,4-diones have been synthesized in a novel one-pot reaction by reacting cyanohydrins stepwise with 1,1′-carbonyldiimidazole and primary amines followed by acidic hydrolysis of the intermediate 4-imino-oxazolidin-2-ones. Their microwave-assisted conversion into α-hydroxyamides was accomplished by treatment with catalytic amounts of sodium methoxide in methanol.     

Electrochemical Synthesis of MII Complexes with a Schiff Base containing an Amido Group. Crystal Structure of a Cobalt(II) Complex with a Reorganised Ligand

M(HL)(H₂O)_n complexes have been obtained by the electrochemical reaction of Fe, Co, Ni, Cu, Zn and Cd anodes with the potentially pentadentate and trianionic asymmetrical Schiff base 3‐aza‐N‐{2‐[1‐aza‐2‐(5‐nitro‐2‐hydroxylphenyl)‐vinyl]phenyl}‐4‐(5‐nitro‐2‐hydroxyphenyl)but‐3‐enamide (H₃L), containing a hard amido donor atom. The complexes have been characterized by elemental analysis, mass spectrometry, IR and ¹H NMR spectroscopies, magnetic measurements and molar conductivities. Co(HL)(H₂O) ( 2 ) has been found to rearrange in DMF solution into a crystallographically solved octahedral complex, CoL¹(H₂O)₂ ( 7 ) [where H₂L¹ is the symmetrical Schiff base ligand N,N′‐(1,2‐phenylene)‐bis(5‐nitro‐3‐hydroxysalicylidenimine)]. A hydrolysis mechanism is discussed to explain this rearrangement.     

Solvation of uranyl(II), europium(III) and europium(II) cations in "basic" room-temperature ionic liquids: a theoretical study

We report a molecular dynamics study of the solvation of UO2(2+), Eu3+ and Eu2+ ions in two "basic" (Lewis acidity) room-temperature ionic liquids (IL) composed of the 1-ethyl-3-methylimidazolium cation (EMI+) and a mixture of AlCl4- and Cl- anions, in which the Cl-/AlCl4- ratio is about 1 and 3, respectively. The study reveals the importance of the [UO2Cl4]2- species, which spontaneously form during most simulations, and that the first solvation shell of europium is filled with Cl- and AlCl4- ions embedded in a cationic EMI+ shell. The stability of the [UO2Cl4]2- and [Eu(III)Cl6]3- complexes is supported by quantum mechanical calculations, according to which the uranyl and europium cations intrinsically prefer Cl- to the AlCl4- ion. In the gas phase, however, [Eu(III)Cl6]3- and [Eu(II)Cl6]4- complexes are predicted to be metastable and to lose two to three Cl- ions. This contrasts with the results of simulations of complexes in ILs, in which the "solvation" of the europium complexes increases with the number of coordinated chlorides, leading to an equilibrium between different chloro species. The behavior of the hydrated [Eu(OH2)8]3+ complex is considered in the basic liquids; the complex exchanges H2O molecules with Cl- ions to form mixed [EuCl3(OH2)4] and [EuCl4(OH2)3]- complexes. The results of the simulations allow us to better understand the microscopic nature and solvation of lanthanide and actinide complexes in "basic" ionic liquids.     

Silica-Based and Transition Metal-Based Inorganic-Organic Hybrid Materials—A Comparison

Organically substituted metal alkoxides can be prepared by reaction of the parent alkoxides with complexing organic compounds. The chemical and structural consequences of such substitutions are discussed in this article. Examples are given showing how functional organic moieties, such as polymerizable groups, can be incorporated into sol-gel materials via the complexing ligands. Major structural differences between silica-based and metal-based hybrid materials originate from the different charge/coordination number ratios of silicon and most metals. This results in a high tendency for the molecular building blocks to aggregate. In many cases, metal oxide clusters are formed which are capped by the organic ligands. Such surface-modified clusters are themselves very valuable condensed matter units for materials syntheses.     

《高分子化学》课程中“活性自由基聚合”的教学实践

《高分子化学》课程是五大化学基础课程(无机化学、有机化学、分析化学、物理化学、高分子化学)之一,是化学类、高分子材料与工程、材料化学专业的必修课程。"活性"/可控自由基聚合是一种相对较新且重要的聚合物合成技术和方法,针对目前《高分子化学》课程中活性自由基聚合的教学比较薄弱的现状,从教学的角度探讨了活性聚合和可控/"活性"自由基聚合的本质和特点,介绍了本人在这方面的教学实践活动,遵循成果导向教育理念,通过以学为中心的教学方式,打造金课,提高教学质量。