硅酸盐中桥联键的机制及其性质的CNDO/2法研究

法计算模型,分析了桥联键的成键机制,解释了硅酸盐的通常性质。以体系总能量随桥角变化关系,解释了硅酸盐矿物及沸石分子筛中桥角Si-O-T出现的范围和几率。 由计算结果还发现,桥氧上具有较高的非键p-电子电荷Q_o~n,并随桥氧的第三配原子性质和距离R(M-O~(br))而变化,使桥氧具有授受电子的双重性质。在此基础上,探讨了沸石分子筛的碳离子催化活性机理,提出了锁与匙匹配原子对的催化活性中心的新观点。     

Development and critical comparison of greener flow procedures for nitrite determination in natural waters

Two greener procedures for flow-injection spectrophotometric determination of nitrite in natural waters were developed and critically compared. Replacement of toxic reagents, waste minimization and treatment were exploited to attend the standards of clean chemistry. The flow system was designed with solenoid micro-pumps in order to minimize reagent consumption and waste generation. The first procedure is based on the Griess diazo-coupling reaction with sulfanilamide and N-(1-naphthyl)ethylenediamine (NED) yielding an azo dye, followed by photodegradation of the low amount of waste generated based on the photo-Fenton reaction. The second procedure is based on the formation of iodine from nitrite and iodide in acid medium in order to avoid the use of toxic reagents. For Griess method, linear response was achieved up to 1.0 mg L^− 1, described by the equation A = − 0.007 + 0.460C (mg L^− 1), r = 0.999. The detection limit was estimated as 8 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.8% (n = 20). The sampling rate was estimated as 108 determinations per hour. The consumption of the most toxic reagent (NED) is reduced 55-fold and 20-fold in comparison to batch method and flow injection with continuous reagent addition, respectively. A colorless residue was obtained by in-line photodegradation with reduction of 87% of the total organic carbon content. The results obtained for natural water samples were in agreement with those achieved by the reference method at the 95% confidence level. For the nitrite–iodide method, linear response was observed up to 2.0 mg L^− 1, described by the equation A = − 0.024 + 0.148C (mg L^− 1), r = 0.999. The detection limit was estimated as 25 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.6% (n = 20). The sampling rate was estimated as 44 determinations per hour. Despite avoiding the use of toxic reagents, the nitrite–iodide method presented worst performance in terms of selectivity and sensitivity.     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

Robust core-shell supramolecular assemblies based on cationic vesicles and ring-shaped [Mo154] polyoxomolybdate nanoclusters: template-directed synthesis and characterizations

Substantial progress has been made recently in extending the supramolecular assembly of biomimetic structures to vesicle-based sophisticated nanocomposites and mesostructures. We report herein the successful preparation of unilamellar surfactant vesicles coated with a monolayer of ring-shaped [Mo(154)] polyoxometalate (POM) nanoclusters, (NH(4))(28)[Mo(154)(NO)(14)O(448)H(14)(H(2)O)(70)]. approximately 350 H(2)O, by coulomb attractions using preformed didodecyldimethylammonium bromide (DDAB) surfactant vesicles as templates. The resultant vesicle-templated supramolecular assemblies are robust (they do not disintegrate upon dehydration) both at room-temperature ambient and vacuum conditions, as characterized by conventional transmission electron microscopy (TEM) and atomic force microscopy (AFM). The flexibility of the complex soft assemblies was also revealed by AFM measurements. The effect of POM-vesicle coulomb attractions on the dimensions of the templating vesicles was also investigated by using dynamic light scattering (DLS). Although origins of the structure stability of the as-prepared supramolecular assemblies are not clear yet, the nanometer scale cavities and the related properties of macroions of the POM clusters may play an important role in it.     

集化学家与化学教育家于一身的一代化学大师李比希--纪念李比希诞辰200周年

在德国著名化学家李比希诞辰200周年之际，对这位集化学家与化学教育家于一身的一代化学大师对科学和科学教育以及人类社会作出的贡献进行了评述。     

Synthesis and magnetic properties of novel polymeric complexes containing bithiazole rings

A novel linear polymer (PFABT) containing bithiazole rings was synthesized by polycondensation of 2,2′‐diamino‐4,4′‐bithiazole (DABT) and formaldehyde. The complexes of PFABT with two transition metal ions (Fe²⁺, Cu²⁺) were prepared for the first time. The polymer was determined through FT‐IR, ¹H‐NMR and elemental analysis (EA), and the complexes were characterized by FT‐IR. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 4 K and as a function of temperature (4–300 K) under an applied magnetic field of 30 kOe. The results show that PFABT‐Cu²⁺ is a ferromagnet while PFABT‐Fe²⁺ is an anti‐ferromagnet. Copyright © 2007 John Wiley & Sons, Ltd.     

结晶聚合物的中间层

介绍了结晶聚合物中间层概念及各种实验技术所提供的中间层存在的证据。附25篇参考文献。     

Click Chemistry: Evolving on the Fringe

The article herein briefly introduces the story of the birth of click chemistry and its evolution after that. A new angle to interpret click reactions was proposed using the “reactivity‐availability‐functionality” trilogy. CuAAC (Copper‐catalyzed azide‐alkyne cycloaddition), the most popular click reaction by far, was revisited along with the thiol‐ene, metal‐free AAC, SuFEx (Sulfur(VI) fluoride exchange) and the lately discovered diazotransfer process. By encountering more and more near‐perfect reactions, click chemistry is evolving and expanding on the fringe of the chemistry and different scientific disciplines, destination unknown.      

含吩噻嗪金属配合物的合成及非线性光学性质研究

本文报道了一种新的配体:10-乙基-3-甲酰吩噻嗪缩肼基二硫代甲酸甲酯(HL)及其金属配合物的合成。采用了元素分析、质谱、核磁共振、红外光谱对配体及其金属配合物进行了表征。此外,并应用紫外、荧光和Z-扫描技术,测定了配体及其金属配合物的荧光最佳发射波长(λ_max^em)、荧光量子产率(Φ_f)、寿命(τ)和非线性光学性质。结果表明它们在DMF溶液中都能发射出较强的橄榄色荧光,配体及其金属配合物都有双光子吸收,并且金属配合物的非线性光学效应比配体明显增强。用半经验量子化学方法(RHF/PM3)计算结果与实验值较为吻合。     

Molecular beams and model catalysis: activity and selectivity of specific reaction centers on supported nanoparticles.

Reaction kinetics on nanometer-scale particles are different from those on extended surfaces of bulk materials. This fact has been utilized for a long time to empirically maximize the performance of heterogeneous catalysts, but the understanding of the underlying effects is poor at the microscopic level. Modern molecular beam-based methods, however, allow us to derive very detailed kinetic information on catalytically active surfaces. In combination with structurally highly controlled model catalysts, microscopic insights into the activity and selectivity of specific reaction centers on catalyst nanoparticles can be obtained. This combined approach is illustrated through simple model reactions.