周期性磁谐振材料本构参数的理论分析

将薄的磁谐振介质板等效为面磁流, 利用周期性边界条件, 给出了面磁流的指数形式. 通过计算无穷个面磁流在不同空间位置上产生的总电场和总磁场, 推导出了周期性磁谐振人工材料的色散关系和布洛赫阻抗, 进而获取了布洛赫本构参数的理论计算公式. 由于考虑了磁谐振人工材料中的电反谐振对布洛赫介电常数和磁导率的影响, 所以基于仿真实验的布洛赫本构参数的提取值和布洛赫本构参数理论预测值之间的误差很小, 这说明本文推导的布洛赫本构参数的理论计算公式在描述周期性磁谐振材料的电磁特性方面是十分有效的. 这些理论公式将在解释磁谐振现象、设计和优化周期性磁谐振材料等方面提供重要的理论依据. 关键词： 周期性结构 磁谐振 布洛赫本构参数 面磁流     

Ku波段微波小功率放大器的设计

文中论述了利用修正的S参数法,设计了Ku波段微波小功率放大器,具有功率增益高和可靠性高的优点。利用这种设计方法,设计并制作了两个实验的功率放大器,并且它们的性能与设计数据很接近     

临界装置绝对裂变率测量

临界装置是在低功率下运行的能够维持可控自持链式裂变反应的装置，一般运行的热功率在1kW以下，与动力堆相对应，一般称为零功率装置。在临界装置上进行的各项研究中，一个重要的参数就是裂变反应率(简称裂变率)，它是其它参数测量的基准，如在脉冲式的反应堆中，还是脉冲裂变总数的测量基准，是脉冲堆的一个主要指标。     

提高辐射场特定区域n／γ值初步实验研究

为满足用户抗辐射加固实验研究的需要，在中国第二号快中子脉冲反应堆上开展了提高特定区域内n/γ值初步实验研究。其中，n是待测辐射场中子注量，γ是相应辐射场的吸收剂量。     

铍焊接填充材料的应用

铍的焊接常出现裂纹和气孔。焊接时加填充材料，然后再考虑接头结构设计、焊接工艺参数调整、焊前预热和焊后缓慢冷却等措施，它们之间协调匹配，可有效地阻止铍焊接产生裂纹。在焊接不开裂的情况下设法减轻和消除气孔缺陷。填充材料的加入，主要是改善焊缝的性能，减少焊接应力进而改善材料的焊接性。     

Ab initio MRCI＋Q study on potential energy curves and spectroscopic parameters of low-lying electronic states of CS＋

Carbon monosulfide molecular ion （CS＋）, which plays an important role in various research fields, has long been attracting much interest. Because of the unstable and transient nature of CS＋, its electronic states have not been well investigated. In this paper, the electronic states of CS＋ are studied by employing the internally contracted multireference configuration interaction method, and taking into account relativistic effects （scalar plus spin–orbit coupling）. The spin–orbit coupling effects are considered via the state-interacting method with the full Breit–Pauli Hamiltonian. The potential energy curves of 18 Λ–S states correlated with the two lowest dissociation limits of CS＋ molecular ion are calculated, and those of 10 lowest Ω states generated from the 6 lowest Λ–S states are also worked out. The spectroscopic constants of the bound states are evaluated, and they are in good agreement with available experimental results and theoretical values. With the aid of analysis of Λ–S composition of Ω states at different bond lengths, the avoided crossing phenomena in the electronic states of CS＋ are illuminated. Finally, the single ionization spectra of CS （X1Σ＋） populating the CS＋（X2Σ1/2＋, A2Π3/2, A2Π1/2, and B2Σ1/2＋） states are simulated. The vertical ionization potentials for X2Σ1/2＋, A2Π3/2, A2Π1/2, and B2Σ1/2＋ states are calculated to be 11.257, 12.787, 12.827, and 15.860 eV, respectively, which are accurate compared with previous experimental results, within an error margin of 0.08 eV~0.2 eV.     

Numerical analysis of the resonance mechanism of the lumped parameter system model for acoustic mine detection

The method of numerical analysis is employed to study the resonance mechanism of the lumped parameter system model for acoustic mine detection. Based on the basic principle of the acoustic resonance technique for mine detection and the characteristics of low-frequency acoustics, the “soil-mine” system could be equivalent to a damping “mass-spring” resonance model with a lumped parameter analysis method. The dynamic simulation software, Adams, is adopted to analyze the lumped parameter system model numerically. The simulated resonance frequency and anti-resonance frequency are 151 Hz and 512 Hz respectively, basically in agreement with the published resonance frequency of 155 Hz and anti-resonance frequency of 513 Hz, which were measured in the experiment. Therefore, the technique of numerical simulation is validated to have the potential for analyzing the acoustic mine detection model quantitatively. The influences of the soil and mine parameters on the resonance characteristics of the soil–mine system could be investigated by changing the parameter setup in a flexible manner.     

Consistency proof of two denoising methods and the parameter selection of PDE filtering method for ESPI

Electronic speckle pattern interferometry （ESPI） is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the oriented feature of ESPI fringes, i.e., the second-order oriented partial differential equation （SOOPDE） and oriented, regularized quadratic-cost function filtering methods, are first proven to be consistent. An important question in solving partial differential equation, i.e., how to select suitable parameters in an adaptive manner, is then discussed. The computer-simulated and experimentally obtained ESPI fringe patterns and phase map are processed by the SOOPDE filtering model with adaptive selective parameters. The qualitative and quantitative analyses demonstrate that the parameters selected by the adaptive method are effective and suitable for the SOOPDE filtering model.     

近地面三阵子天线估计电磁波到达角和极化参数

从自由空间中的三阵子天线求入射电磁波极角和方位角的基本原理出发, 结合电场各个分量与极化方式之间的关系给出了左手极化波计算波达角的公式, 及地球表面上方三阵子天线判断入射波极化方向的方法; 本文提出了一种新颖的滤除地面反射波的方法, 保证了波达角的求解精度; 利用获得的高精度的波达角和测得的电场强度, 计算出了电磁波的各种极化参数, 这些极化参数可以作为电离层研究和电磁波在电离层中传播研究的参考. 关键词： 地球表面 三阵子天线 波达角 极化参数     

Characterizing neural activities evoked by manual acupuncture through spiking irregularity measures

The neural system characterizes information in external stimulations by different spiking patterns. In order to examine how neural spiking patterns are related to acupuncture manipulations, experiments are designed in such a way that different types of manual acupuncture （MA） manipulations are taken at the ＇Zusanli＇ point of experimental rats, and the induced electrical signals in the spinal dorsal root ganglion are detected and recorded. The interspike interval （ISI） statistical histogram is fitted by the gamma distribution, which has two parameters： one is the time-dependent firing rate and the other is a shape parameter characterizing the spiking irregularities. The shape parameter is the measure of spiking irregularities and can be used to identify the type of MA manipulations. The coefficient of variation is mostly used to measure the spike time irregularity, but it overestimates the irregularity in the case of pronounced firing rate changes. However, experiments show that each acupuncture manipulation will lead to changes in the firing rate. So we combine four relatively rate- independent measures to study the irregularity of spike trains evoked by different types of MA manipulations. Results suggest that the MA manipulations possess unique spiking statistics and characteristics and can be distinguished according to the spiking irregularity measures. These studies have offered new insights into the coding processes and information transfer of acupuncture.