An electron-diffraction study of the molecular structure of gaseous perbromyl fluoride and calculation of its force field and vibrational amplitudes

The molecular structure of FBrO₃ has been studied by gas-phase electron diffraction. Least-squares refinements of the molecular geometry using fixed spectroscopic amplitudes revealed two geometrical minima. Initially, the amplitudes employed were derived from diagonal force fields obtained by spectroscopic least-squares refinements to fit observed and calculated wave numbers; for each geometry there are two spectroscopic minima. In the lowest geometrical minimum the wave number agreement is poor, however, the introduction of the ∠OBrO/∠FBrO interaction force constant removed the discrepancies; the resulting force field is F(Br-O) = 6.92 ± 0.02 mdyn Å^?1F(Br-F) = 3.22 ± 0.03 mdyn Å^?1, F(∠OBrO) = 1.06 ± 0.02 mdyn Å, F(∠FBrO) = 0.81 ± 0.03 mdyn Å, F(∠OBrO/∠FBrO) = ?0.19 ± 0.02 mdyn Å. In the corresponding geometrical minimum r_g(Br-O) = 1.582 ± 0.001 Å, r_g(Br-F) = 1.708 ± 0.003 Å, r_α(∠OBrO) = 114.9 ± 0.3°, r_α(∠FBrO) = 103.3 ± 0.3°. Perpendicular amplitude correction coefficients, calculated for each force field employed, were used throughout to relate the interatomic distances through the r_α-structure. The geometries of the r_α^o- and r_e-structures are estimated.     

Determination of long-lived radionuclides in concrete matrix by laser ablation inductively coupled plasma mass spectrometry

A laser ablation system using a Nd:YAG laser was coupled both to a quadrupole inductively coupled plasma (ICP) mass spectrometer and to a double-focusing sector field ICP mass spectrometer. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied for the determination of long-lived radionuclides in a concrete matrix. The investigated samples were two laboratory standards with a concrete matrix, which we doped with different long-lived radionuclides (e.g. ⁹⁹Tc, ²³²Th, ²³³U, ²³⁷Np) from the ng g⁻¹ to μ g⁻¹ concentration range and an undoped concrete material (blank). Detection limits for long-lived radionuclides in the 10 ng g⁻¹ range are reached for LA-ICP-MS using the quadrupole mass spectrometer. With double-focusing sector field ICP-MS, the limits of detection are in general one order of magnitude lower and reach the sub ng g⁻¹ range for ²³³U and ²³⁷Np. A comparison of mass spectrometric results with those of neutron activation analysis on undoped concrete sample indicates that a semiquantitative determination of the concentrations of the minor and trace elements in the concrete matrix is possible with LA-ICP-MS without using a standard reference material.     

A comparison of phototautomerism in different sites of free-base porphin (H2P) in n-alkane crystals

Selective laser-induced phototautomerism of free-base porphin in different n-alkanes (n-hexane, n-heptane, n-octane, nnonane, n-decane, n-undecane and n-dodecane) has been used to identify tautomer splittings in a number of sites in polycrystalline samples at 2 K. Pairs or lines arising from the two molecular orientations in each site can be reversibly transformed into each other. In the odd n-alkanes the occupation of different sites was not dependent on the rate at which the samples were frozen, but in the even n-alkanes metastable sites were only occupied following rapid quenching.     

Determination of 19-norandrosterone in CCQM-P68. NIST results using an isotope dilution liquid chromatography/tandem mass spectrometry method

The US National Institute of Standards and Technology (NIST) participated in an international interlaboratory study under the auspices of the Consultative Committee for Amount of Substance (CCQM) for the determination of 19-norandrosterone (19-NA) in urine, the principal metabolite of nandrolone and certain other synthetic testosterone substitutes banned for use by the World Antidoping Agency (WADA). Prior to this study, NIST developed a candidate reference measurement procedure based upon isotope dilution liquid chromatography/tandem mass spectrometry. This method was applied to a urine sample distributed to the participants in the study by the Australian National Measurement Institute, Pymble, Australia (NMIA). The NIST results were in very good agreement with those from the other participants, all of whom used methods based upon gas chromatography/mass spectrometry. All known significant sources of uncertainty were evaluated, resulting in a relative expanded uncertainty of less than 5% (coverage factor k = 2).     

The American (USA) perspective six years after implementation of CLIA'88 (Federal) regulations

 On September 1, 1992 all testing sites in the United States were required to comply with the Clinical Laboratory Improvement Amendments of 1988 (CLIA'88). These regulations, based on both total quality management (TQM) and continuous quality improvement (CQI) principles, reshaped the environment for more than 90% of laboratories. CLIA'88 represented a revolutionary change by imposing universal, uniform regulations based on test complexity for all sites examining materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of disease. CLIA'88 specifies minimum requirements for personnel, quality control, and proficiency testing (PT). In addition, laboratories are required to follow manufacturers' directions and comply with other specified good laboratory practices. PT is mandated for most of the frequently run analyses and quality assurance requirements integrate the principles of CQI as well as TQM into the regulatory process. Biannual inspection is integral to CLIA'88, however, laboratories can choose other federally approved ("deemed") professional organizations, such as the Commission on Office Laboratory Accreditation, the College of American Pathologists, or the Joint Commission on Accreditation of Healthcare Organization, having standards that meet or exceed those of CLIA'88. CLIA'88 has still not been finalized. This article discusses the impact and changes since CLIA's implementation in 1992. Received: 5 October 1998 · Accepted: 20 October 1998     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Relative raman line intensities for H2 and for D2. Correction factors for molecular non-rigidity

Ab initio calculations are presented for H₂ and D₂ relative Raman intensities originating from common rotational levels for both vibrational-rotational and pure rotational transitions. Factors f(J) required to correct measured intensities for molecular non-rigidity (e.g. in temperature measurements) are tabulated. The calculations are compared with literature perturbation-theory equations (significant differences at large J in vibration-rotation) and with experiment.     

实验室安全环保意识的调查与分析——以中山大学化学类专业学生为例

A survey about students' laboratory safety and environmental protection consciousness was performed in the freshmen majored in chemistry at Sun Yat-Sen University. Results showed that laboratory safety and environmental protection consciousness of most students' are weak. After analyzing the reasons, we put forward some suggestions. Cultivating students' laboratory safety and environmental protection consciousness should be carried out from several aspects such as emphasizing and regulating from school level, training in laboratory teaching, maintaining good cultural atmosphere of laboratory, as well as providing perfect laboratory safety and environmental protection facilities. We should guide students to actively learn knowledge and skills of laboratory safety and environmental protection in order to develop their good behavior and raise their consciousness.     

针对理论-实验教学相融合的微助教辅助实验教学实践——以滴定分析实验教学为例

研究生助教培养是高校化学本科生实验教学的重要组成部分,对提高实验课程的教学水平具有重要的推动作用。为解决助教培训时间仓促、定位不清、内容不连续、工具性倾向明显,以及在助教聘用、考核、激励、教学质量评估等方面规范性和系统性不足等问题,仪器分析实验室以《GB/T 19028–2018质量管理人员参与和能力指南》为理论依据,探索提高研究生助教深度参与实验教学的方法。连续三年追踪助教培养改进效果反馈数据表明,实验室采取的一系列改进措施有效提升了研究生助教的教学能力,促进了教学质量的提高,实现助教管理的改革创新与“过程增值”。     

Flume testing of passively adaptive composite tidal turbine blades under combined wave and current loading

The tidal energy industry is progressing rapidly, but there are still barriers to overcome to realise the commercial potential of this sector. Large magnitude and highly variable loads caused by waves acting on the turbine are of particular concern. Composite blades with in-built bend-twist elastic response may reduce these peak loads, by passively feathering with increasing thrust. This could decrease capital costs by lowering the design loads, and improve robustness through the mitigation of pitch mechanisms. In this study, the previous research is extended to examine the performance of bend-twist blades in combined wave–current flow, which will frequently be encountered in the field. A scaled 3 bladed turbine was tested in the flume at IFREMER with bend-twist composite blades and equivalent rigid blades, sequentially under current and co-directional wave–current cases. In agreement with previous research, when the turbine was operating in current alone at higher tip speed ratios the bend-twist blades reduced the mean thrust and power compared to the rigid blades. Under the specific wave–current condition tested the average loads were similar on both blade sets. Nevertheless, the bend-twist blades substantially reduced the magnitudes of the average thrust and torque fluctuations per wave cycle, by up to 10% and 14% respectively.