3,4—亚甲二氧基苯甲酸锡酯的合成及表征

３，４－亚甲二氧基苯甲酸及其取代物与三苯基氢氧化锡或二丁基化锡反应合成了５个锡酯，通过元素分析，ＩＲ和＾１ＨＮＭＲ对其进行了表征。     

1─芳氧基乙酰基─4─苯甲酰氨基硫脲衍生物的合成及其生物活性研究

１─芳氧基乙酰基─４─苯甲酰氨基硫脲衍生物的合成及其生物活性研究魏太保，陈继畴（西北师范大学化学系，兰州，７３００７０）杨素铀，王秀春（西北师范大学生物系，兰州，７３００７０）关键词：１—芳氧基乙酰基—４—苯甲酰基氨基硫脲，相转移催化，合成，生物活性...     

The Reaction of 4-Formylsydnone with Nitroalkanes

Under various basic solutions and reaction durations, 3-substituted 4-formyIsydnones and nitroalkanes containing α-active hydrogen (e.g. nitromethane and nitroethane) are converted to β-nitroalcohols, nitroalkenes and dinitroalkanes. β-Nitroalcohols are obtained only by electrochemical reaction on an electrogenerated base (EGB). The mechanism of overall reaction steps in particular is discussed.     

Trigonal-planare CuX3-Gruppen in Cu2Mo6X14, X = Cl,Br, I

Trigonal Planar CuX₃-Groups in Cu₂Mo₆X₁₄, X = Cl, Br, I Cu₂Mo₆Cl₁₄ (I), Cu₂Mo₆Br₁₄ (II) and Cu₂Mo₆I₁₄ (III) were synthesized by thermal treatment of corresponding mixtures of copper(I) and molybdenum(II) halides. The crystal structures were determined by single crystal X-ray analyses. I and II show isotypism, cubic, Pn3 (no. 201, sec. setting), Z = 4, I: a = 12.772(3) Å, II: a = 13.350(2) Å. III shows a new structural type, orthorhombic, Pbca (No. 61), Z = 4, a = 16.058(3) Å, b = 10.643(2) Å, c = 16.963(3) Å. Trigonal planar CuX₃ units were found in I? III. Structural behaviour relations are discussed, especially with regard to ionic conductivity.     

Synthese und Strukturuntersuchungen von Ba2H[α-FeO4W12O36] · 26 H2O

Synthesis and Structure Studies of Ba₂H[α-FeO₄W₁₂O₃₆] · 26 H₂O The heteropolyanion compound Ba₂H[α-FeO₄W₁₂O₃₆] · 26 H₂O (I) crystallizes in the tetragonal space group P4 n2 with the lattice parameters a = 12.398(6), c = 18.721(6) Å; Z = 2; D_x = 4.128 g · cm^?3. The structure was solved on a twinned crystal from 1029 observed reflections and refined to an index R of 7.6%. The calculations were done by means of a modified ORFLS-programme by Eitel and Bärnighausen. The heteropolyanion [α-FeO₄W₁₂O₃₆]^5? has the well known α-Keggin structure. The average distance of the four central oxygen atoms to the Fe^III position (0, 0, 0) is 1.84 Å. The angles ? O? Fe? O are 112.3° (4X) and 103.9 (2X), respectively, which leads to an disphenoidal distortion of the FeO₄ tetrahedron. The powder and single crystal ESR spectra of I show the anisotropy of the Fe^III fine structure transition 1/2 ? ?1/2. The Mößbauer spectra confirm the tetragonal distortion of the central FeO₄ tetrahedron (quadrupole splitting Δ ≈ 0.50 mm · s^?1).     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.     

基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

Isolation of lappaconitine from Aconitum septentrionale roots by adsorption

Extracts of Aconitum septentrionale Koelle roots obtained using chloroform, isopropanol, and ethanol were purified using chloroform and basic γ-Al₂O₃. Ballast materials were selectively adsorbed by γ-Al₂O₃, increasing the mass fraction of lappaconitine in the extract. The ethanol extract was purified most. The degree of lappaconitine extraction by chloroform was unaffected by the presence of γ-Al₂O₃. However, the mass fraction in the extract and lappaconitine extraction from Aconitum septentrionale were increased more than twice. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 274–276, May–June, 2006.     

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

The role of C-centered radicals on the mechanism of action of artemisinin

Artemisinin is a sesquiterpene lactone with an endoperoxide function that is essential for its antimalarial activity. Endoperoxides are supposed to act on heme leading to the reduction of the peroxide bond and production of radicals, which can be responsible for killing the parasite. The geometries of artemisinin, radical anions and neutral species generated by rearrangement after reduction of the peroxide bond were fully optimized with the AM1 and PM3 semi-empirical methods, in order to characterize the intermediates formed during the process. Among the radicals calculated along the pathway for reductive decomposition of artemisinin, the secondary radical centered on carbon C₄ has the highest stability when compared to other radicals that can be achieved either by hydrogen migration to the original O-centered radical or by homolytic break of C–C bond. This suggests that the C₄-centered radical may be the species responsible for killing the parasite, as has been indicated previously in experimental studies.