共沉淀法合成稀土正磷酸盐(La,Gd)PO4:RE3+(RE=Eu,Tb)及其真空紫外光谱特性

采用共沉淀法制备了稀土正磷酸盐荧光粉(La,Gd)PO4:RE3+(RE=Eu,Tb).红外光谱分析发现GdPO4的红外光谱吸收峰与LaPO4一致,只是峰位向高波数方向移动.(La,Gd)PO4:RE3+的真空紫外光谱特性研究表明,Gd3+在能量传递过程中起中间体作用.XPS研究揭示,LaPO4的价带由O2-的2p能级构成,而GdPO4的价带则是由O2-的2p能级和Gd3+的4f能级共同构成.     

Electrochemical Investigations of Mn and Al Co‐doped Li2FeSiO4/C Cathodes for Li‐Ion Battery

Few studies on orthosilicate cathodes co‐doped with two cations have been reported until now. Here, we report the synthesis of Mn and Al co‐doped Li₂Fe_0.8?xMn_0.2Al_xSiO₄ (x = 0.05 and 0.1) by a solid‐state reaction route and characterized by X‐ray diffraction (XRD), particle size analysis, scanning electron microscopy (SEM), galvanostatic charge/discharge tests, and capacity intermittent titration technique (CITT), as compared to the single‐doped Li₂Fe_0.8Mn_0.2SiO₄. Though the co‐doping leads to a slight decreased capacity owing to the increased impurity and Al³⁺ inertia, a better cycling performance is obtained as expected. Especially when x is 0.05, the modified sample (Li₂Fe_0.75Mn_0.2Al_0.05SiO₄) shows an initial discharge capacity of 159.3 mAh/g and high capacity retention of 78% after 50 charge/discharge cycles. The present work indicates that a synergistic effect of Mn and Al co‐substitution at the Fe site could partly make up the disadvantage of single Mn doping, and might provide an effective guide for the dopant incorporation to Li₂FeSiO₄ systems.     

La2O3助剂对Au/TiO2催化氧化CO性能的影响

采用溶胶-凝胶法制备了TiO2以及La2O3-TiO2载体, 再用沉积沉淀法制备Au/TiO2和Au/La2O3-TiO2催化剂, 并对催化剂的CO氧化反应活性进行测试. 结果表明, La2O3助剂可以显著提高催化剂催化氧化CO的活性. X射线衍射(XRD)、程序升温脱附(TPD)、N2吸附-脱附(BET)表征结果表明, La2O3助剂不仅提高了催化剂比表面积, 抑制了TiO2晶粒尺寸的长大, 并且增强了TiO2的晶格应变, 在O2气氛吸附过程中主要在TiO2表面形成O-物种. 原位傅立叶变换红外(FT-IR)结果进一步表明, La的掺杂不仅提高了吸附在Au活性位CO的氧化速率, 还使TiO2表面形成第二种活性位, 从而显著提高了催化活性.     

磺化聚苯乙炔/多壁碳纳米管复合材料导电机理研究

将磺化聚苯乙炔(SPPA)与多壁碳纳米管(MWNT)超声共混制备得到SPPA/MWNT复合材料. 用四探针电阻率测试、场发射扫描电镜(FESEM)、XPS、UV-Vis、XRD等方法对复合材料导电机理进行研究. 结果表明, SPPA/MWNT的电导率发生两次突跃；掺杂剂MWNT具有低的临界阈值; 临界阈值附近, 复合材料中MWNT具有不连续分布的现象及复合材料电阻呈负温度系数(NTC)效应; SPPA/MWNT复合材料中MWNT的碳原子对SPPA 进行掺杂. 推测复合材料的导电机理为, 共轭聚合物SPPA不仅被导电粒子MWNT物理填充, 同时还被MWNT的碳原子掺杂, 使复合材料中存在两种导电通路而导电, 一是因被掺杂而成为高电导率主体的SPPA相互接触形成的导电通路, 二是MWNT相互接触形成的导电通路.     

砷掺杂的ZnO纳米线的发光特性

在GaAs基底上制备了高质量的直径为10～100 nm、长度约几个微米的As掺杂ZnO纳米线. 扫描电镜、EDX分析及透射电镜分析显示, ZnO纳米线具有较好的晶态结构. 对As掺杂前后的ZnO纳米线进行光学特性测量, 结果表明, ZnO纳米线在385 nm处有较强的紫外发光峰, 在505 nm左右有较弱的蓝绿发光峰; As掺杂较大地改变了ZnO纳米线的发光性质, 使本征发光峰移到393 nm处, 蓝绿发光强度有了很大程度的提高.     

Aggregation-Induced Emission by Molecular Design: A Route to High-Performance Light-Emitting Electrochemical Cells

The emission efficiency of organic semiconductors (OSCs) often suffers from aggregation caused quenching (ACQ). An elegant solution is aggregation-induced emission (AIE), which constitutes the design of the OSC so that its morphology inhibits quenching π–π interactions and non-radiative motional deactivation. The light-emitting electrochemical cell (LEC) can be sustainably fabricated, but its function depends on motion of bulky ions in proximity of the OSC. It is therefore questionable whether the AIE morphology can be retained during LEC operation. Here, we synthesize two structurally similar OSCs, which are distinguished by that 1 features ACQ while 2 delivers AIE. Interestingly, we find that the AIE-LEC significantly outperforms the ACQ-LEC. We rationalize our finding by showing that the AIE morphology remains intact during LEC operation, and that it can feature appropriately sized free-volume voids for facile ion transport and suppressed non-radiative excitonic deactivation.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Ni-La催化剂上乙醇水蒸气重整制氢——燃料电池氢源技术

采用浸渍法制备出γ-Al2O3、SiO2和γ-Al2O3·SiO2负载的Ni-La催化剂,用XRD、TPR、XPS、H2-TPD、NH3-TPD和TG等手段对催化剂进行了表征,结果表明:这3种负载型催化剂中的活性组分Ni的分散度较高,La3 氧化物高度分散于载体表面.在温度为400℃、水醇比为4.0和液体空速为8.0 mL h-1 g-1cat的条件下,催化剂进行稳定性测试,结果表明:γ-Al2O3·SiO2负载的Ni-La催化剂在整个100 h稳定性测试过程中,氢气的选择性保持在67.0%左右,且稳定性良好.对经过稳定性测试后的Ni-La催化剂进行热重分析,发现γ-Al2O3·SiO2负载的Ni-La催化剂具有较少的积碳量,仅仅是0.86 g C·g-1cat,其中石墨碳占42.81%.     

Synthesis and Structure of a La（Ⅲ） Complex of 1,10-Phenanthroline-2,9-dicarboxylate： a Three-dimensional Network via Hydrogen Bonding Interactions

A new La（Ⅲ） complex, {[La（L）（NO3）（H2O）3]·H2O}n （L = 1,10-phenanthroline- 2,9-dicarboxylate）, has been synthesized and structurally determined by X-ray diffraction analysis. The complex crystallizes in the monoclinic system, space group P21/c with a = 7.7358（17）, b = 8.1664（18）, c = 28.271（6） A, β= 95.184（4）°, V= 1778.6（7） A3, Z = 4, C14H14LaN3O11, Mr = 539.19, Dc = 2.014 g/cm^3, μ= 2.471 mm^-1, F（000） = 1056, the final R = 0.0350 and wR = 0.0659. In this complex, each metal center adopts a ten-coordination geometry formed by two N atoms from a ligand L and eight O atoms from three H2O molecules, a nitrate ion and carboxylates of two ligands. Each ligand adopts a N2,O3-pentdentate coordination mode using two N and two O atoms chelating a La（Ⅲ）, and using another O atom of carboxylate to bridge another La（Ⅲ） center resulting in a 1D helical chain molecule. Intermolecular strong O-H…O and weak C-H…O hydrogen bonds extend the 1D chain structure into a 3D supramolecular architecture.     

Growing kinetics and structural characterization of oxide film formed on La-doped Co-40Cr alloy

The isothermal and cyclic oxidizing kinetics of Co-40Cr alloy and its lanthanum ion-implanted samples were studied at 1000℃ in air by thermal-gravity analysis (TGA). Scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM)) were used to examine the oxidized film's morphology and the structure after oxidation. Secondary ion mass spectrum (SIMS) method was used to examine the binding energy change of chromium caused by La-doping and its in?uence on formation of Cr2O3 film. Laser Raman spectrum was used to examine the tress changes within oxidized films. It was found that lanthanum implantation remarkably reduced the isothermal oxidizing rate of Co-40Cr and improved the anti-cracking and anti-spalling properties of Cr2O3 film. The reasons were that the implanted lanthanum reduced the grain size and internal stress of Cr2O3 oxide, increased the high temperature plasticity of oxidized film. Lanthanum mainly existed in the outer surface of Cr2O3 film in the forms of fine La2O3 and LaCrO3 spinel particles.