分析化学样品前处理技术研究进展

综述分析化学中样品前处理技术的重要地位、分类及研究进展情况,并对超临界流体萃取等几种近年来发展较快的样品前处理新方法的原理及特点作了介绍。这些技术能够有效地减少分析过程中由样品前处理过程带来的误差,具有前处理快速、简便的优点,同时可与分析仪器联用,实现分析的自动化。     

高效液相色谱-串联质谱法同时检测水中17种抗生素

建立了高效液相色谱-串联质谱(HPLC-MS/MS)同时检测水中大环内酯类、磺胺类、甲氧苄啶、四环素类、氟喹诺酮类五类共17种抗生素含量的分析方法。水样经Oasis HLB固相萃取小柱富集净化后,以CORTECSTM C18色谱柱(100×4.6mm,2.7μm)分离,2%甲酸+2mmol/L乙酸铵溶液-乙腈为流动相,在电喷雾离子源正离子模式下采用质谱多反应监测模式(MRM)检测。结果表明,各目标化合物在0.50~250ng/mL范围内,线性关系良好(R20.990),检测限为0.01~2.50ng/L;在10和100ng/L添加水平下,17种抗生素的加标回收率为60.6%~125%,相对标准偏差(RSDs,n=4)为0.311%~14.8%。应用该方法测定广州市某河流的水样,除三乙酸竹桃霉素、氯四环素、洛美沙星、恩氟沙星上游未被检出,下游微量检出外,其余13种抗生素均有检出,其中氧四环素的浓度最高,最大值达560ng/L,四环素次之,为540ng/L。     

聚胸腺嘧啶单链DNA-CuNCs荧光增强法用于汞离子的高灵敏检测

基于Hg~(2+)与DNA中胸腺嘧啶(T)结合的高度特异性和DNA铜纳米簇的荧光增强性质,构建了一种简便、灵敏检测汞离子的新方法.当Hg~(2+)存在时,聚T单链DNA(P1)通过T-Hg~(2+)-T特异性结合形成双链DNA,Cu~(2+)经抗坏血酸钠还原后生成的中间体Cu+与双链DNA螺旋结构间的氢键部分有强的结合力,促使Cu0附着聚集在双链DNA上形成铜纳米簇,导致体系荧光增强,从而实现对汞离子的高灵敏检测.体系荧光强度与Hg~(2+)浓度的对数值成正比,对Hg~(2+)检测的线性范围为1.0 nmol/L~10μmol/L,检出限达0.4 nmol/L,对湖水样品中Hg~(2+)检测的回收率达到97.2%~106.6%.与传统方法相比,该方法具有无需标记、检出限低及选择性好等优点,可用于环境水体中汞离子的测定.     

Nutraceutical Products—State-of-the-Art for Sample Preparation in Pesticide Residues Analysis

Nutraceutical products are plant-based materials primarily valued for their possible medicinal or therapeutic properties. According to their “natural” origin they are often perceived as being safe; however, for the prevention of economic losses, pesticides may be used against pest, mold and insects causing plant damage. Bearing in mind that a nutraceutical is a concentrated form of the plant, pesticides could be found in the final product in possibly worrying concentration. Nutraceutical products and dried herb materials typically represent very complex matrices for pesticide residue analysis, therefore a proper sample preparation protocol with appropriate clean-up steps is necessary prior to the analysis. Hence, this article gives an overview of pesticide residue analyses in nutraceuticals and provides the state of the art for sample preparation techniques applied for different types of nutraceuticals.     

全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱法检测植物源性食品中34种农药残留

建立了全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱（HPLC-MS/MS）同时检测植物源性食品中34种农药残留的分析方法。方法利用全自动QuEChERS样品制备系统涡旋振动和离心功能，将手动QuEChERS方法中样品提取和分散固相萃取相结合；优化了操作参数及前处理步骤，在多反应监测（MRM）模式下检测，基质匹配外标法定量。从方法学验证角度对全自动QuEChERS法与手动QuEChERS法进行了比较。结果表明：该方法中大多数农药在一定范围内呈现良好的线性关系，相关系数（R²）均大于0.99，检出限为0.76~3.60 μg/kg，定量限为2.28~10.80 μg/kg，加标回收率为53.0%~125.2%，相对标准偏差（RSD）<15.9%（n=5）。该方法与手动QuEChERS法的方法验证比对结果显示差异不明显，用于植物源性食品中多农药残留检测可有效降低劳动强度和出错概率。     

QuEChERS/超高效液相色谱-串联质谱法快速测定土壤中19种氟喹诺酮类抗生素残留

建立了一种基于QuEChERS前处理技术,结合超高效液相色谱-串联质谱(UPLC-MS/MS)和内标法,快速测定土壤中19种氟喹诺酮类抗生素(FQs)残留的分析方法。5. 0 g土壤样品添加200μg/kg基质匹配同位素内标后,经20 m L 0. 1 mol/L EDTA-McIlvaine缓冲液和乙腈混合溶剂(体积比1∶1)提取,基质分散固相萃取(150 mg无水MgSO4、15 mg PSA、15 mg C18)净化后,采用UPLC-MS/MS进行测定。质谱分析采用电喷雾电离,正离子扫描,多反应监测模式。在优化条件下,19种抗生素的相关系数(r~2)为0. 992～0. 998,检出限为0. 2～1. 0μg/kg,定量下限为1. 0～5. 0μg/kg;在10、50、200μg/kg加标水平下的回收率为65. 2%～104%,相对标准偏差(n=5)不大于14%。该方法操作简单快速、准确度高,适用于土壤中氟喹诺酮类抗生素残留的检测。     

高中化学学业评价标准研制策略的探究

研制高中化学学业评价标准,可以从4步进行：研制学习目标,突出学生主体;研制评价目标,凸显核心素养;编制评价样例,弄清评价等级;命制评价样题,体现评价要求。     

Cr3+比色荧光探针的合成及细胞成像应用

以2,3,3-三甲基-3H-苯并[e]吲哚和对二甲氨基苯甲醛为原料, 乙醇作溶剂, 在酸性催化条件下, 通过一步反应合成了比色荧光探针B. 在EtOH/HEPES(pH=7.4)体积比为9∶1的混合体系中, 向探针B溶液中加入Cr ³⁺后, 溶液颜色由淡黄色变为紫红色, 说明探针B可以对Cr ³⁺进行裸眼识别. 紫外-可见吸收光谱和荧光发射光谱分析表明, 探针B对Cr ³⁺的选择性好、 灵敏度高且对EDTA有良好的接力识别. 探针B对Cr ³⁺的结合常数K_a=0.28×10 ² mol/L, 检出限为1.90×10 ^-8 mol/L, 该检出限低于世界卫生组织(WHO)规定的饮用水中Cr ³⁺的最大含量(9.60×10 ^-8 mol/L). 利用荧光发射光谱对实际水样中Cr ³⁺的浓度进行了定量检测. 探针B也可应用于对活细胞中Cr ³⁺的检测, 具有较好的应用前景和实用价值.     

Combination of a modified quick,easy, cheap,efficient, rugged,and safe extraction method with a deep eutectic solvent based microwave‐assisted dispersive liquid–liquid microextraction: Application in extraction and preconcentration of multiclass pesticide residues in tomato samples

In this study, a new two–step extraction procedure based on the combination of a modified quick, easy, cheap, effective, rugged, and safe extraction method with a deep eutectic solvent based microwave‐assisted dispersive liquid–liquid microextraction has been developed for the extraction of multiclass pesticides in tomato samples before their analysis by gas chromatography with flame ionization detection. In this method, initially, an aliquot of tomato is crushed and diluted with deionized water. The mixture is then passed through a filter paper and its residue and aqueous phase are separated. Afterwards, acetonitrile as an extraction/disperser solvent is passed through the filter paper containing the refuse. The analytes remained in the refuse are extracted into the acetonitrile and then the obtained extract is mixed with a deep eutectic solvent. The obtained mixture is injected into the tomato juice and placed in a microwave oven for 15 s. Consequently, a cloudy state is formed and the extractant containing the analytes are sedimented at the bottom of the tube after centrifugation. Finally, 1 μL of the sedimented phase is removed and injected into the separation system. Under the optimum conditions, limits of detection and quantification were in the ranges of 0.42–0.74 and 1.4–2.5 ng/g, respectively.     

共价有机骨架材料在样品前处理中的研究进展

共价有机骨架（COFs）是由有机单体通过共价键连接形成的二维或三维晶体多孔结构。作为一种新兴的晶体多孔材料,COFs已经在气体储存、催化、传感、药物输送等各个领域广泛应用。近年来,COFs材料由于密度低、表面积大、结构可控等优点,在分析化学方面显示出巨大的潜力。该文综述了多孔COFs及其复合材料在样品前处理中的研究应用,包括分散固相萃取、固相微萃取和磁性固相萃取等。