Simple Device for Isolation of Organic Compounds from Water

Abstract

A simple device for isolation of organic compounds from aqueous samples has been designed and its operating parameters tested during bioth periodic and continuous operation using isolation of organochlorine compounds as an example.

A stream of an aqueous sample is pumped at elevated temperature by a piston pump to an unit for expransion of the liquid phase surface, where the liquid is sprayed on the walls of the unit and flows down freely.

Organochlorine compounds passing to the gaseous phase are purged with a stream of purified air, oxidied and the chlorides formed are determined coulometrically. The designed device, due to its simplicity, can be built and employed in each averagely equipped laboratory.     

Field Desorption Mass Spectrometry of Standard Organophosphorus Pesticides and Their Identification in Waste Water

The characteristic behaviour of four groups of commonly used organophosphorus pesticides such as phosphates, phosphorothionates, phosphorothiolates and phosphorodithioates has been investigated by field desorption mass spectrometry. Their spectra show molecular ions of high abundance and characteristic fragmentation patterns. The phosphates and phosphorothionates usually show the α-cleavage with respect to the P-atom with and without proton transfer. In contrast, the phosphorothiolates and phosphorodithioates usually show the β-cleavage from the P-atom. The fragments with the charge retention on the phosphorus moiety were also observed in the field desorption mass spectra, although their abundances were often relatively low.

The analyses of standard mixtures as well as some waste water samples indicate that field desorption mass spectrometry is suitable for the identification of organophosphorus pesticides at nanogram level in mixtures and environmental samples without preliminary separation and purification.     

Occurrence of methylated arsenic species in parts of plants growing in polluted soils

Arsenic compounds were determined in extracts of branches, leaves and roots from plants growing in a mining contaminated area. The selected species were Dryopteris filix-max, Quercus pubescens, Dipsacus fullonum, Alnus glutinosa, Buxus sempervirens and Brachythecium cf. reflexum. Total arsenic content in the subsamples was analysed by ICPMS after acidic digestion. In general, concentrations in the plant parts followed the gradient roots?>?branches?>?leaves indicating that they are arsenic-resistant plants. Arsenic species were determined in water/methanol (9?+?1, v/v) extracts by HPLC-ICPMS. Different levels of organoarsenicals were found depending on plant part and plant species. Higher percentages of organoarsenic compounds were recorded in branches and leaves (up to 35% in the boxtree sample), than in roots (0.7–5.2% in the same plant species). The absence of organic arsenic species in the soil where the plants were collected and the low levels of organoarsenicals found in the roots, indicate that the studied plants have the ability to accumulate or synthesise organoarsenic compounds in relatively high percentages, and this information contributes to enlarge the knowledge of arsenic uptake and speciation in plants.     

QuEChERS and solid phase extraction methods for the determination of energy crop pesticides in soil,plant and runoff water matrices

QuEChERS and solid phase extraction (SPE) methods were applied for determining four herbicides (metazachlor, oxyfluorfen, quizalofop-p-ethyl, quinmerac) and one insecticide (α(±)-cypermethrin) in runoff water, soil, sunflower and oilseed rape plant matrices. Determination was performed using gas chromatography mass spectrometry (GC-MS), whereas high-pressure liquid chromatography mass spectrometry (HPLC-MS) was used for quinmerac. In all substrates linearity was evaluated using matrix-matched calibration samples at five concentration levels (50–1000 ng L^?1 for water, 5–500 μg kg^?1 for soil and 2.5–500 μg kg^?1 for sunflower or oilseed rape plant). Correlation coefficient was higher than 0.992 for all pesticides in all substrates. Acceptable mean recovery values were obtained for all pesticides in water (65.4–108.8%), soil (70.0–110.0%) and plant (66.1–118.6%), with intra- and inter-day RSD% below 20%. LODs were in the range of 0.250–26.6 ng L^?1 for water, 0.10–1.8 μg kg^?1 for soil and 0.15–2.0 μg kg^?1 for plants. The methods can be efficiently applied for field dissipation studies of the pesticides in energy crop cultivations.     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

Construction of a portable sample preparation device with a magnetic poly(methacrylic acid‐co‐ethylene dimethacrylate) monolith as the extraction medium and its application in the enrichment of UV filters in water samples

A portable sample preparation device with a magnetic polymer monolith as the extraction medium was constructed. The monolith was synthesized by polymerizing methacrylic acid and ethylene dimethacrylate around a cylindrical magnet. In this way, the monolith with a magnetic core could be readily attached to the extraction device by magnetism. The constructed device was evaluated for the enrichment of UV filters in water samples, followed by high‐performance liquid chromatographic analysis. The extraction efficiency for the targets was satisfactory with no matrix interference. Good linearities were obtained for the UV filters with the correlation coefficients >0.9986. The limits of detection and quantification for the UV filters were 0.3–0.8 and 1.0–2.4 ng/mL, respectively. The recoveries of the UV filters from the spiked water samples at the concentration of 100 ng/mL were 95.3–101.7%, with relative standard deviations <10%. Accordingly, the proposed portable device was demonstrated to be suitable for on‐site simultaneous sampling, purification, and preconcentration within a single step.     

Aspects of trapping efficiency and matrix effects in the development of a restricted‐access‐media‐based trap‐and‐elute liquid chromatography with mass spectrometry method

Online restricted access media with liquid chromatography and tandem mass spectrometry for the direct analysis of small molecules in biological fluids represents an interesting alternative to time‐demanding traditional sample preparation techniques. In this study, important considerations concerning the development of a restricted access media with liquid chromatography and tandem mass spectrometry method for the analysis of dansylated estrogens in biological matrix are presented. Parameters influencing peak tailing and trapping efficiency were evaluated. The key factors included the ion strength of the mobile phase, a loading flow rate of the sample onto the trap column, and selection of a proper stationary phase of the trap column for a given set of analytes. These parameters have proven to be essential for minimizing any unwanted chromatographic peak tailing. The bulk derivatization of the analytes in the biological fluids and its relationship to the observed matrix effects was evaluated as well.     

Determination of parabens in wastewater samples via robot-assisted dynamic single-drop microextraction and liquid chromatography–tandem mass spectrometry

Dynamic single-drop microextraction (SDME) was automatized employing an Arduino-based lab-made Cartesian robot and implemented to determine parabens in wastewater samples in combination with liquid chromatography–tandem mass spectrometry. A dedicated Arduino sketch controls the auto-performance of all the stages of the SDME process, including syringe filling, drop exposition, solvent recycling, and extract collection. Univariate and multivariate experiments investigated the main variables affecting the SDME performance, including robot-dependent and additional operational parameters. Under selected conditions, limit of detections were established at 0.3 µg/L for all the analytes, and the method provided linear responses in the range between 0.6 and 10 µg/L, with adequate reproducibility, measured as intraday relative standard deviations (RSDs) between 5.54% and 17.94%, (n = 6), and inter-days RSDs between 8.97% and 16.49% (n = 9). The robot-assisted technique eased the control of dynamic SDME, making the process more feasible, robust, and reliable so that the developed setup demonstrated to be a competitive strategy for the automated extraction of organic pollutants from water samples.     

Independent development and validation of a novel six-color fluorescence multiplex panel including 61 diallelic DIPs and 2 miniSTRs for forensic degradation sample

Current forensic DNA profiles are obtained based on analyses of PCR product sizes or DNA sequence polymorphisms. Sometimes routine forensic analysis using short tandem repeat (STR) generates unsuccessful DNA testing result if the biological sample encountered is excessively degraded and low-template DNA. Herein, a new six-color fluorescence labeling system, including 59 autosomal diallelic deletion or insertion polymorphisms (DIPs), 2 miniSTRs, 2 Y-chromosome DIPs, and 1 Amelogenin gene with the amplicon sizes of less than 200 bp, was self-developed. According to the validation guidelines for DNA analysis methods formulated by the Scientific Working Group on DNA Analysis Methods, the validation studies have also been carried out for the multiplex system. This novel panel possessed the features of strong stability, high sensitivity, and good specificity, which was especially suitable for the forensic degraded and mixed sample detections. The cumulative power of exclusion and cumulative matching probability of the system were 0.9999978 and 9.833E-28, respectively, in Han Chinese in Hunan, China. Moreover, this system will be an effective new tool that can be independently applied to forensic personal identification and paternity testing in the populations from the East Asia region, even from the South Asia, America, and Europe regions. The system can also contribute to population phylogenetic affinity and genetic structure analyses among different populations.