Kinetic model of induced codeposition of Ni-Mo alloys

The kinetic model of induced codeposition of nickel-molybdenum alloys from ammoniun citrate solution was studied on rotating disk electrodes to predict the behavior of the electrode-position. The molybdate (MoO42-) could be firstly electro-chemically reduced to MoO2, and subsequently undergoes a chemical reduction with atomic hydrogen previously adsorbed on the inducing metal nickel to form molybdenum in alloys. The kinetic equations were derived, and the kinetic parameters were obtained from a comparison of experimental results and the kinetic equations. The electrochemical rate constants for discharge of nickel, molybdenum and water could been expressed as k1(E) = 1. 23 × 109 CNi exp( - 0.198FE/RT) mol/(dm2·s), k2(E) =3.28× 10-10 CMoexp( - 0. 208FE/ RT) mol/(dm2·s) and k3(E) = 1.27 × 10-6exp( - 0.062FE/ RT) mol/(dm2 · s), where CNi and CMo are the concentrations of the nickel ion and molybdate, respectively, and E is the applied potential vs. saturated calomel electrode (SCE). The codeposition p     

外源性加硒法增加枣中硒含量的研究

以不同深度硒溶液对枣树进行不同次数的叶面喷施,得到了不同硒含量的枣样品,用荧光光度法测定了样品中硒的含量。结果表明,与对照组相比,用外源性加硒法可明显提高枣中硒的含量;并且可通过调节喷施液浓度和喷施次数,得到硒含量适宜的成熟小枣。     

液相色谱荧光衍生法在糖类物质分析中的应用

介绍了目前在液相色谱荧光衍生法分析糖类物质中常用的几类荧光衍生试剂及相应的衍生方法,对近期糖类物质分离分析中的液相色谱荧光检测方法做了系统综述。引用文献60篇。     

环氧氯丙烷作重原子微扰剂在环糊精诱导室温磷光法中的应用

本文报道一种新型的重原子微扰剂－环氧氯丙烷（ＥＣＨ）,在此重原子微扰下,建立了β－环糊精诱导室温磷光法（β－ＣＤ－ＲＴＰ）测定痕量溴代萘（ＢｒＮ）的方法,结果令人满意。同时还在该体系中测定了溴代萘的ＤＴＰ寿命、猝灭常数、三元包合物的包接常数。实验结果证明,α－ＢｒＮ／ＥＣＨ／β－ＣＤ三分子包接配合物比β－ＢｒＨ／ＥＣＨ／β－ＣＤ三分子包接络合物包接更加有效,而且稳定性更强。     

寡糖—8—氨基芘—1,3,6—三磺酸衍生物的毛细管电泳—激光诱？…

利用自组装的毛细管电泳－激光诱导荧光装置,研究了多种寡糖－８－氨基芘－１,３,６－三磺酸（寡糖ＡＰＴＳ）衍生物的分离。考察了电泳介质、浓度及pＨ对寡糖－ＡＰＴＳ 衍生物分离的影响,在酸性和碱性条件下,分别实现了痕量寡糖标准品及葡聚糖水解产物的高效分离。     

丝裂霉素C与牛血清蛋白结合作用的研究

结合光谱法与微量热法研究了水溶液中丝裂霉素C与牛血清白蛋白分子间的结合反应,测定了反应的结合常数K~A,结合位点数n及热力学函数△~rG~m,△~rH~m和△~rS~m,并确定了分子间作用力性质;依据Forster非辐射能量转移机制,确定了授体-受体间的结合距离和能量转移效率;采用同步荧光技术考察了丝裂霉素C对牛血清白蛋白构象的影响。     

治疗骨骼疾病药物阿屈酸的电喷雾质谱研究

阿屈酸的极性很强且热稳定性很差，因此不适合用电子轰击质谱来研究，该文研究了它的正离子和负离子电喷雾质谱的行为，结果表明阿屈酸既可作负离子电喷雾质谱分析，也可作正离子电喷雾质谱分析，且正离子电喷雾质谱分析的灵敏度高于负离子；电喷雾源内碰撞诱导解离分析时正离子和负离子的裂解方式相似，但不完全相同，且正离子有明显的[M Na]^ 峰和[M H]^ 及[M Na]^ 与M的非共价键簇离子峰，这对确定类似未知物的相对分子质量有很大的帮助。     

基于荧光内滤效应的锂离子荧光化学传感器研究

报道了一种基于荧光内滤效应的荧光增强型锂离子光化学传感器,将荧光试剂、亲脂性pH指示剂和锂离子中性载体结合在增塑的PVC膜中,Li⁺与H⁺在膜相中的竞争萃取效应引起受亲脂性pH指示剂调制的敏感膜荧光值的变化.推导了有关理论关系式,研究了该传感器的响应特性,并对人工合成样品进行测试,结果较为满意.     

Influence of Atomistic Protrusion on the Substrate on Molecular Luminescence in Tunnel Junctions

Scanning tunneling microscope (STM) induced luminescence can be used to study various optoelectronic phenomena of single molecules and to understand the fundamental photophysical mechanisms involved. To clearly observe the molecule-specific luminescence, it is important to improve the quantum efficiency of molecules in the metallic nanocavity. In this work, we investigate theoretically the influence of an atomic-scale protrusion on the substrate on the emission properties of a point dipole oriented parallel to the substrate in a silver plasmonic nanocavity by electromagnetic simulations. We find that an atomic-scale protrusion on the substrate can strongly enhance the quantum efficiency of a horizontal dipole emitter, similar to the situation with a protrusion at the tip apex. We also consider a double-protrusion junction geometry in which there is an atomic-scale protrusion on both the tip and the substrate, and find that this geometry does provide significantly enhanced emission compared with the protrusion-free situation, but does not appear to improve the quantum efficiency compared to the mono-protrusion situation either at the tip apex or on the substrate. These results are believed to be instructive for future STM induced electroluminescence and photoluminescence studies on single molecules.     

便携式X射线荧光光谱仪在污染场地中重金属检测的应用

为探究便携式X射线荧光光谱法(Portable X-ray fluorescence spectrometry method, PXRF)测定结果的不确定度, 应用PXRF法和传统实验室方法对湖南某典型有色金属污染场地及周边土壤中的重金属进行测定,通过建立线性回归模型对比分析两种方法的测定数据,探究了PXRF法测定数据的准确程度和置信区间。结果表明,PXRF法原位、异位测定值与传统实验室方法测定值均能呈现较好的线性相关性,As、Cu、Pb、Cd等元素的决定性系数(R2)均大于0.70,其检测数据质量均能达到定量水平;PXRF法与实验室方法测定值间比率的置信区间结果显示,Cd元素的准确性最好,其次为Pb、Cu、As,比率置信区间分别为(0.57, 1.89)、(0.38, 2.22)、(0.31, 2.25)、(0.20, 4.53)。由此可见,PXRF法是一种方便快捷且相对准确的土壤重金属现场检测方法,可广泛地应用于污染场地调查和土壤修复工程实践中。