前驱体水解对纳米铂形状控制合成的影响

以聚丙烯酸钠(NaPA: M_w ≈ 2100)为保护剂，对比研究了H_2还原K_2PtCl_4 和K_2PtCl_6水溶液制备纳米铂晶粒的形状选择性，揭示了前驱体的水解对纳米铂 晶粒的形状控制合成具有显著影响。文献中通常采用的合成立方形状纳米铂的 K_2PtCl_4前驱体在水溶液中不稳定，避光静置一周会析出黑色沉淀。这种不稳定 性导致了以K_2PtCl_4为Pt前驱体的合成结果难以重复。相比而言，避光静墨的 K_2PtCl_6水溶液很稳定，以它为前驱体合成的纳米铂通常为削角八面体。 K_2PtCl_6水溶液暴露于室内光线中会出现[PtCl_6]~(-2)的光致水解。当[PtCl_6] ~(2-)的紫外特征吸收峰(260nm)由于光致水解完全消失后，以聚丙烯酸钠为保护剂 ，通过H_2还原可以有选择性地(约80%)合成由{100}晶面包裹的立方体形状的纳米 铂。     

Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

Counterion Exchange Selectivity in Detergent–Polymer Aggregates

In aqueous solution, the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene glycol) (PEG) results in the formation of small aggregates or clusters of SDS attached to the PEG polymer chain. Selectivity coefficients for exchange of two monovalent (N-methyl-4-cyanopyridinium cation and Tl⁺) and two divalent (methylviologen cation and Cu²⁺) counterions at the surface of SDS–PEG clusters, determined employing photophysical techniques, are similar, but not identical, to those for exchange at the surface of SDS micelles in the absence of PEG. The principal factor affecting ion exchange selectivity in SDS–PEG clusters does not appear to be aggregate size or surface charge density but rather the presence of poly(oxyethylene) subunits at the aggregate surface.     

PhenNO—TTA—乳化剂OP荧光光度法测定微量铕

研究了Ｅｕ（Ⅲ）－ＰｈｅｎＮＯ－ＴＴＡ－乳化剂ＯＰ体系的荧光性质及其用于微量铕的测定。该体系具有良好的分析特性，最低检测限可达７．０×１０＾－１４ｍｏｌ／Ｌ．     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

Time-resolved fluorescence relaxation of 3-methyllumiflavin in polar solution

We have studied the fluorescent properties of a well-defined model flavin compound (3-methyllumiflavin) in a relatively polar solvent like propylene glycol or ethanol. Inhomogeneous spectral broadening effects were directly time-resolved by detection at the extreme blue and red edges of the fluorescence band of 3-methyllumiflavin using excitation in the main absorption band. At the high-energy side of the emission band a rapid decay component (tens of picoseconds) was resolved indicative for the disappearance of the initially prepared, nonequilibrium state with a characteristic dipolar relaxation time. At the low-energy side the rise of a solvent relaxed fluorescent species could be time-resolved. The wavelength-dependent effects on the dipolar relaxation were abolished when excitation was at the low-energy side of the absorption band. The experimental decays of the flavin solvate at different energies of fluorescence and excitation are presented as they represent an easy diagnosis for energy dependent solvation dynamics. Wavelength dependent rotation of 3-methyllumiflavin, examined by fluorescence anisotropy decay, turned out to be absent for 3-methyllumiflavin in propylene glycol between 263 and 293 K, probably because of the small change in dipole moment upon flavin excitation.     

Kinetic-catalytic determination of osmium by fluorescence quenching with salicylfluorone and hydrogen peroxide

A highly sensitive and selective fluorescence-quenching kinetic method is proposed for the determination of trace osmium(IV), based on the catalytic effect of osmium(IV) on the salicylfluorone (_ex = 510 nm, _em = 535 nm)-H₂O₂ system at pH 9.3–9.6. Using the fixed time method, osmium(IV) in the range 0.008–0.6 ng/ml can be determined. The detection limit is 0.006 ng/ml. Over thirty anions and cations, including other platinum metal ions, do not interfere, even when present in large excess. The method has been applied successfully for the determination of osmium in a series of synthetic mixtures and refined ore with relative standard deviations of 2–6%.     

Mass shifting roles of negative kernel mass in density estimation

f(x) is a univariate density in C ⁴ with bounded support. For any n and sufficiently small kernel bandwidths, the symmetric appendage of any negative mass, –U, to any smooth unimodal symmetric kernel of order p=2 shifts expected estimator mass from regions where f(x)>0 to regions where f(x)<0. For large n, the mean automatic kernel adaptation induced by –U is analyzed in the simplest MISE reduction scenario: The symmetric appendage of –U to the uniform kernel K(x, X) over MISE-optimal bandwidths reduces MISE by shifting K(x, X) mass asymmetrically across the observation X in the direction of decreasing |f(x)|.