Protective sol-gel coating on silicate phosphor used in light emitting diodes

In this study, an orange-red silicate phosphor that is used in light emitting diodes (LEDs) was coated with a SiO₂ blocking layer via a sol-gel reaction of tetra-ethyl ortho-silicate (TEOS) to investigate its reliability as an encapsulant. A sol-gel coating protects the phosphor surface from moisture and reactive materials and improves the reliability of the phosphor. The efficacy of the phosphor coating following an 85 °C and 85 relative humidity (Rh)% test decreased by 7%, whereas an uncoated phosphor coating decreased by 35%. A SiO₂ sol-gel coating decreases the luminous efficiency by a small amount with each coating.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Synthesis and electro‐optical properties of polyfluorene modified with randomly distributed electron‐donor and rotaxane electron‐acceptor structural units in the main chain

Polyfluorene PF?γCD rotaxane copolymer, composed of randomly distributed 9,9‐dioctylfluorene, methyltriphenylamine (electron‐donating) and 9‐dicyanomethylenefluorene complexed with γ‐cyclodextrin (γCD) (electron‐accepting) structural units, has been synthesized by Suzuki cross‐coupling reaction. The chemical structures were proved by FTIR and ¹H NMR spectroscopy. The surface morphology, thermal, optical, electrochemical behavior, and adhesion characteristics of the obtained rotaxane copolymer have been investigated and compared with those of the nonrotaxane counterpart ( PF ). Relatively high fluorescence efficiency, almost identical normalized absorbance maximum in solution and solid‐state of PF?γCD rotaxane copolymer, and a more uniform and smoother surface with lower adhesion forces provides the role of γCD encapsulation on the lower aggregation propensity. PF?γCD and PF copolymers exhibit n‐ and p‐doping processes and blue‐light emission in the film state. The optical and electrochemical band gaps (ΔE_g), as well as the highest occupied molecular orbital/lowest unoccupied molecular orbital positions in an energetic diagram indicate that both copolymers are promising blue‐emitting electroluminescent materials. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Copolyphenylenes with pendant benzimidazolyl and diethanolaminohexyloxy groups: Synthesis and electron‐transporting application in PLEDs

Two new electron‐transporting copolyphenylenes P1NH and P2NH possessing balanced charges crucial to emission efficiency of polymer light‐emitting diodes (PLEDs) have been synthesized and applied as an electron‐transporting layer (ETL). The main chain structure is all para‐linkage for P1NH and both para‐ and meta‐linkage for P2NH , with the same pendant electron‐withdrawing benzimidazolyl and polar diethanolaminohexyloxy groups. Both copolymers possess excellent thermal stability (T _d > 300 °C, T _g > 100 °C) due to their rigid backbones. In addition, the pendant groups effectively lower LUMO (～ ?2.70 eV) and HOMO (～ ?5.70 eV) levels, resulting in improved electron‐transporting and hole‐blocking capabilities. Multilayer yellow‐emitting PLEDs with a configuration of ITO/PEDOT:PSS/SY/ETL/LiF/Al were successfully fabricated by the spin‐coating process. The maximum luminance and maximum current efficiency of the P1NH ‐based device were 12,881 cd/m² and 10.94 cd/A, respectively, superior to the performance of P2NH ‐based device (4938 cd/m², 3.70 cd/A) and the device without ETL (8690 cd/m², 2.78 cd/A). Current results indicate that P1NH is highly effective in enhancing electron transport and device performance. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2494–2505     

Organic soluble deoxyribonucleic acid (DNA) bearing carbazole moieties and its blend with phosphorescent Ir(III) complexes

A functionalized deoxyribonucleic acid (Cz‐DNA) was prepared with carbazolyl ammonium lipid as a triplet host material for phosphorescent material system. It is soluble in organic solvents, which facilitates the sample preparation for the absorption and luminescent properties in solid states. A highly soluble iridium complex, Ir(Cz‐ppy)₃ with carbazolyl‐substituted 2‐phenylpyridine ligands was employed for studying the phosphorescence in Cz‐DNA. There is a good overlap between the photoluminescence spectrum of Cz‐DNA and the metal‐to‐ligand charge transfer (MLCT) absorption bands of the iridium complex. This overlap enables efficient energy transfer from the excited state in the host to the MLCT band of Ir(Cz‐ppy)₃. In addition, photoluminescence quantum yield of Cz‐DNA was found to be relatively larger than the copolymer (PCzSt) with vinylcarbazole and styrene. Thus, Cz‐DNA was employed as a triplet host material for fabricating multilayered electrophosphorescence devices via modification of its property by doping 5,4‐tert‐butylhexyl‐1,3,4‐oxadiazole (PBD). After doping 30 wt % PBD and 10 wt % Ir(Cz‐ppy)₃ into Cz‐DNA, we achieved much improvement in electron injection/transport from an adjacent carrier transport layer, resulting in much improved device performances. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1913–1918, 2010     

InGaAsP multiple quantum well edge-emitting light-emitting diode showing low coherence characteristics using selective-area metalorganic vapor phase epitaxy

Low coherence multiple-quantum well edge-emitting light-emitting diodes were obtained using selective-area metalorganic vapor-phase epitaxial growth, which utilized growth rate enhancement on an open stripe region between mask stripes. An optical absorption region, which was controlled by selective-area growth, was introduced to suppress optical feedback. At a driving current of 100 mA and an ambient temperature of 25°C, a power of 55 μW was coupled into a single-mode fiber, and a broad spectrum without spectral ripple was observed. Low coherence characteristics and very small temperature dependence were obtained in the temperature range from -40°C to 85°C. The modulation bandwidth was 210 MHz at a bias current of 100 mA.     

Synthesis of electroluminescent copoly(aryl ether)s containing alternate 1,4‐distyrylbenzene derivatives and aromatic 1,3,4‐oxadiazole or 3,3″‐terphenyldicarbonitrile segments

New copoly(aryl ether)s ( P1 – P3 ) containing alternate 2,5‐dihexyloxy‐1,4‐di(m‐ethoxystyryl)benzene ( P1 , P2 ) or 2,5‐dihexyloxy‐1,4‐distyrylbenzene ( P3 ) chromophores and aromatic 1,3,4‐oxadiazole ( P1 ) or 3,3″‐terphenyldicarbonitrile ( P2 , P3 ) segments were prepared by Horner reaction ( P1 and P2 ) or nucleophilic displacement reaction ( P3 ). They are basically amorphous materials with 5% weight‐loss temperature above 410 °C. Their absorption, photoluminescence spectra, and quantum yields are dependent on the composition of the isolated fluorophores. The emissions are exclusively dominated by 1,4‐distyrylbenzene segments via excitation energy transfer from electron‐transporting 1,3,4‐oxadiazole ( P1 ) or 3,3″‐terphenyldicarbonitrile ( P2 , P3 ) chromophores. The HOMO and LUMO energy levels have been estimated from their cyclic voltammograms, and the observations confirm that oxidation and reduction start from the emitting 1,4‐distyrylbenzene and electron‐transporting segments, respectively, indicating that both carriers affinity can be enhanced simultaneously. Among the two‐layer PLED devices (ITO/PEDOT/ P1 – P3 /Al), P1 exhibits the best performance with a turn‐on field of 4 × 10⁵ V/cm and a maximum luminance of 225 cd/m². However, P2 emits green–yellow light (555 nm), owing to the excimer emission. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5009–5022, 2005     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Synthesis and optical and electrochemical properties of copolymers consisting of 9,9‐dihexylfluorene and aromatic triazole chromophores

Aromatic triazole chromophores were incorporated into polyfluorene in an attempt to increase electron affinity, to promote emission efficiency, and to diminish excimer formation. Poly(9,9‐dihexylfluorene) ( P1 ) and new copolymers with aromatic triazoles ( P2 – P4 ) were prepared by Suzuki coupling polymerization. In P2 , the aromatic triazole (3.8 mol %) was attached exclusively as terminal groups, whereas P3 and P4 were main‐chain copolymers containing 3.9 and 10.3 mol % aromatic triazole chromophores, respectively. The copolymers were soluble in common organic solvents and showed high decomposition temperatures (437–458 °C). The twisted structure between the triazole and fluorene increased the emission efficiency and effectively prevented excimer formation in P2 – P4 . After the introduction of the triazole units, the absorption spectra showed a blueshift (from 388 to 381 nm in chloroform) due to confined conjugation, but the photoluminescence spectra remained almost the same (417–418 nm); this was attributed to oligofluorene segments. No emission of triazole fluorophores was observed because of efficient energy transfer from the triazole to oligofluorene segments. However, incomplete energy transfer was observed in CH₃COOH. The optical stability upon thermal annealing was also improved by the incorporation of aromatic triazole segments. From cyclic voltammetry results, P2 – P4 , containing triazole groups, showed greater electron affinity (lowest unoccupied molecular orbital level = ?2.67 to ?2.71 eV) than P1 (?2.52 eV). Electroluminescence devices of P1 – P4 all exhibited excimer emissions (483–521 nm), which could also be diminished by the introduction of aromatic triazole chromophores. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 136–146, 2007     

New poly(p‐phenylene vinylene) derivatives with two oxadiazole rings per repeat unit: Synthesis,photophysical properties,electroluminescence, and metal ion recognition

Two new poly(p‐phenylene vinylene) derivatives OX1‐PPV and OX2‐PPV bearing two 1,3,4‐oxadiazole rings per repeat unit and a fully conjugated backbone with solubilizing dodecyloxy side groups were synthesized and investigated. The amorphous conjugated polymers had glass‐transition temperature values of 60–75 °C and emitted intense blue or greenish‐blue light in solution with photoluminescence (PL) emission maxima at 379–492 nm and PL quantum yields of 0.41–0.52. In the solid state they emitted yellowish‐green light with PL emission maxima at 533–555 nm. Cyclic voltammetry showed that both conjugated polymers had reversible reduction and irreversible oxidation, making them n‐type materials. The electron affinity of OX2‐PPV was estimated as 2.85 eV whereas that of OX1‐PPV was 2.75 eV. Yellow electroluminescence (EL) was achieved from single‐layer light‐emitting diodes of OX2‐PPV with an EL emission maximum at 555 nm and a brightness of 70 cd/m². Polymer OX2‐PPV, which was functionalized with 2,6‐bis(1,3,4‐oxadiazole‐2‐yl)pyridine, demonstrated sensitivity to various metal ions as a fluorescence‐mode chemosensor. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2112–2123, 2004