Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

不同调光方式LED照射下的人体非视觉效应

分别采用模拟调光和PWM调光方式实现LED光调节。采用生理参数法,以在校大学生为研究对象,选择3种色温(3 000,5 600,6 500 K)LED光源,在3种照度(300,500,800 lx)水平下,对8名(5男,3女)受测者在实验前后的脉搏和瞳孔进行测量。选择同样3种色温LED光源,分别采用两种调光方式添加蓝光(464nm,20 lx)实现300 lx的照明环境,对12名(8男,4女)受测者在实验前后的脉搏和瞳孔进行测量。结果表明:两种调光方式实现的LED光环境对人体脉搏变化率和瞳孔收缩率的影响均没有显著性差异;在测试照明环境中添加蓝光,可引起人体脉搏变化率和瞳孔收缩率增大,峰值处分别增加约6%和9%。     

一种新型黄色荧光类水滑石材料的制备及表征

用适量的Zn(Ⅱ)取代镁铝水滑石中的Mg(Ⅱ),同时将一定量的2-对联苯基-8-羟基喹啉分散到类水滑石层间的亲油性阴离子中,使其与层板表面上的Zn(Ⅱ)配位,用一步法合成、组装得到一类新型黄色荧光类水滑石复合物(Zn-(HQ-4-biPh)-HTlc)。采用荧光光谱、红外光谱、X射线衍射、扫描电子显微镜和热分析等对其进行了表征。研究结果表明,Zn-(HQ-4-biPh)-HTlc在蓝光(481 nm)激发下可发出黄色荧光(554 nm),与其相应的含锌配合物(Zn[2-(p-biph)-8-Q-O]2)相比,不仅可节省配体用量,而且具有更高的发光强度和更好的热稳定性,有望在白光LED等光电领域得到应用。     

(Ca,Me)La4Si3O13:Eu3+(Me=Sr,Ba)荧光粉的结构和发光特性

采用高温固相法制备了(Ca,Me)La4Si3O13∶Eu3+(Me=Sr,Ba)系列红色荧光体,考察了Eu3+掺杂浓度和Sr2+,Ba2+置换对荧光体结构和发光特性的影响。Eu3+最佳掺杂浓度为nEu3+∶nLa3+=1∶7,5D0-7F2与5D0-7F1跃迁发射强度比为2.55。Eu3+掺杂使晶胞参数a和c呈线性变小,对c的影响大于a,使a/c比增大。Sr2+和Ba2+分别置换基质中的Ca2+可以形成完全固溶体,晶胞参数随Sr2+或Ba2+的置换量增加呈线性增大,使a/c比减小。各发射峰强度在Sr2+置换量为0.4 mol时出现极大值,但随Ba2+置换量的增加而不断增强,全置换后荧光强度最大。荧光体的色坐标为(0.638 5,0.353 0)。     

A green-emitting α-substituted β-diketonate Tb3+ phosphor for ultraviolet LED-based solid-state lighting

The α-substituted β-diketonate [Ln(3Cl-acac)₃(H₂O)₂] [Ln = Tb, Gd] complexes (with 3Cl-acac^– being 3-chloro-2,4-pentanedionate) were characterized by elemental analysis, infrared, ultraviolet (UV)-visible and photoluminescence spectroscopies. For comparison purposes regarding photoluminescence, the well-known [Tb(acac)₃(H₂O)₂] complex was also synthesized. By considering the phosphorescence spectra of [Gd(3Cl-acac)₃(H₂O)₂], the effect of chloride replacement of hydrogen on the triplet state energy of the 3Cl-acac ligand was revealed. To support the interpretation and rationalization of the experimental results, Time-dependent DFT calculations were performed on Tb(3Cl-acac)₃(H₂O)₂. Additionally, the possibility of Tb(3Cl-acac)₃(H₂O)₂ to be used as potential green-emitting phosphor material for solid-sate light emitting diodes was evaluated. A prototype was successfully fabricated coating a near-UV LED (370 nm) with the Tb(3Cl-acac)₃(H₂O)₂ complex.     

Metal Sulfide Nanoparticle Synthesis with Ionic Liquids – State of the Art and Future Perspectives

Metal sulfides are among the most promising materials for a wide variety of technologically relevant applications ranging from energy to environment and beyond. Incidentally, ionic liquids (ILs) have been among the top research subjects for the same applications and also for inorganic materials synthesis. As a result, the exploitation of the peculiar properties of ILs for metal sulfide synthesis could provide attractive new avenues for the generation of new, highly specific metal sulfides for numerous applications. This article therefore describes current developments in metal sulfide nanoparticle synthesis as exemplified by a number of highlight examples. Moreover, the article demonstrates how ILs have been used in metal sulfide synthesis and discusses the benefits of using ILs over more traditional approaches. Finally, the article demonstrates some technological challenges and how ILs could be used to further advance the production and specific property engineering of metal sulfide nanomaterials, again based on a number of selected examples.     

Built-in piezoelectric field improved photocatalytic performance of nanoflower-like Bi2WO6 using low-power white LEDs

Photocatalysis technology has been proved to be a potential strategy for removal of organic dyes, however high-power light sources are generally necessary to initiate photocatalytic reaction. In this work, we employed an excellent photocatalyst of Bi₂WO₆ with visible light harvest and meanwhile an intrinsic ferroelectricity, which realized the efficient degradation of organic dye via the synergetic photopiezocatalysis. Through coupling the illumination by a low-power (9 W) LED and the ultrasonic vibration (120 W) by an ultrasonic cleaner, the nanoflower-like Bi₂WO₆ composed of ultrathin nanosheets showed a much more enhanced photopiezocatalysis performance for purification of organic dye than the individual photocatalysis and piezocatalysis. Furthermore, the high mineralization efficiency and the good durability of the Bi₂WO₆ catalyst were demonstrated. The possible mechanism of photopiezocatalysis was finally proposed, where the ultrasound-induced piezoelectric field in Bi₂WO₆ drove photo-generated electrons and holes to diffuse along opposite directions, consequently promoting the separation efficiency of charge carriers. This work indicates that the synergetic photopiezocatalysis by coupling irradiation and ultrasonic vibration is a promising strategy to purify organic pollutants in wastewater.     

基于大功率LED扩展光源的均匀光斑光辐射模拟器设计

基于边缘光线原理和光学扩展量守恒思想,结合复合抛物面聚光器和轴对称自由曲面透镜,设计并研制了大功率发光二极管扩展光源的反射/折射准直器.运用Tracepro软件对系统进行光束追迹模拟仿真和实验,研制出均匀光斑的光辐射模拟器.模拟器输出发散角为±12°光束,测量距离出射面50cm处光屏的光斑,在尺寸为14cm×14cm的光照范围内,测得光斑水平方向中心线上的光度均匀度优于4.1%,竖直方向中心线上的光度均匀度优于3.8%.     

GaN基紫光LED的高反射率p型欧姆接触

研究用于GaN基大功率倒装焊(Flip-chip)紫光LED(UV-LED)的高反射率p型欧姆接触的电学和光学性能。用磁控溅射的方法在GaN基LED外延片表面沉积了不同厚度Ag,Al,Au和Pd四种金属,测量了样品的反射率和透射率。结合同步辐射高强度X射线衍射和AFM对金属薄膜的晶体结构进行分析,并对表面形貌进行了观测,对由金属薄膜构成的多层膜结构及其对光反射率的作用机理进行了研究。测量结果表明,在入射光波长为400nm时,Ni/Au/Ag和Ni/Au/Al电极的反射率比Ni/Au的反射率提高了三倍。同时与p-GaN有良好的欧姆接触特性。