Hair dye distribution in human hair by ToF-SIMS

A single hair sample preparation protocol modified from reported method was developed and used to prepare longitudinally sectioned hair for ToF-SIMS analysis. Preliminary results demonstrate that ToF-SIMS is capable of providing molecular distribution of fragment ions from intrinsic constituents as well as external chemicals like the hair dye ingredients used in this study. The observation of pPDA and H₂PO₄⁻ penetrating into the internal region of hair might initiate a renewed interest in exposure study.     

Specificity of Cyanine Dye L-21 Aggregation in Solutions with Nucleic Acids

Optical spectroscopy experiments were used to study the features of cyanine dye 3,3′-dimethyl-9-(2-thienyl)-thiacarbocyanine iodide (L-21) aggregation in binary solutions DMF:Tris–HCl buffer (pH = 8) containing nucleic acids (DNA or RNA). The appearance of absorption and luminescence bands associated with J-aggregates and dimers that are formed within the minor groove of DNA has been observed. The model of L-21 J-aggregate structure is proposed. It has been found that dimers are the building blocks of L-21 J-aggregates. Disorientation in dimers caused by the minor groove curvature is reason of observation of Davydov splitting in absorption spectrum of L-21 J-aggregates. In the solution containing DNA the absorption and luminescence bands of L-21 J-aggregates exhibit the specific properties that allows the dye L-21 to be used as a fluorescent probe for DNA detection.     

Premicellar and micelle formation behavior of aqueous anionic surfactants in the presence of triphenylmethane dyes: protonation of dye in ion pair micelles

The premicellar and micelle formation behaviors of four cationic triphenylmethane dyes, viz, Pararosaniline (RN), Crystal violet (CV), Ethyl violet (EV), and Malachite green (MG), in aqueous anionic surfactant solutions of sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), and sodium dodecyl sulfonate (SDSN) have been studied by spectral and surface tension measurements. The study was carried out within a pH range where the dyes are stable in their quinoid forms. The dyes have been found to form dye–surfactant ion pairs (DSIPs) with the surfactants, at the surfactant concentrations well below their critical micelle concentration, CMC*. The DSIPs behave like nonionic surfactants and form an air–water interfacial monolayer. The DSIPs have a lower critical micelle concentration (CMC_IP), greater efficiency, and lower effectiveness than the corresponding pure surfactants. As the surfactant concentration is increased below the CMC*, the DSIPs start forming micelles of their own where the dye gets protonated and exists as a protonated dye–surfactant ion pair (PDSIP) in the ion pair micelles. As the concentration of the surfactant exceeds the CMC* of the pure surfactant, the protonation reverses gradually with the dye remaining in the micelles in solubilized form and the DSIPs in the air–water interfacial monolayer are replaced by pure surfactants. The distorted helical isomeric form (isomer B) of the dyes is favored in the PDSIPs. Copyright © 2009 John Wiley & Sons, Ltd.     

Photo-physical properties and amplified spontaneous emission of a new derivative of fluorescein

The synthesis of new high-performance dyes and the implementation of new ways of incorporating the organic molecules into the solid host matrices have produced a great deal of activity in the field of solid-state dye lasers. In this article, the new laser dye, 2-(6-allyl-3-oxo-3H-xanthen-9-yl)-benzoic acid ethyl ester [AXBE] has been synthesized, and its chemical structure was confirmed by ¹H NMR, ¹³C NMR, IR and elemental analysis. This new dye was covalently bonded with methyl methacrylate (MMA) and 2-hydroxy ethyl methacrylate (HEMA) copolymer backbone and evaluated as the active medium of the solid-state laser dye. Its optical properties were experimentally investigated. Amplified spontaneous emission (ASE) and photostability were studied by pumping the dye sample with 355 nm (8 ns) pulsed Nd-YAG laser.     

Preparation of MnO2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye

Hydrothermal carbonaceous materials and MnO₂ have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO₂ loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO₂/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO₂/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO₂/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

A BODIPY-based highly emissive dye with thiophene-based branch harvesting the light

ABSTRACT

A novel BODIPY-based dye with highly emissive character was configured by Sonogashira coupling and routinely characterized by NMR and MS technology. The emission of dye was investigated in solution/film/solid and shows intensive emission. In solution, the emission peak appeared around 510 nm with little influence by the polar environment. The terthiophene plays an effective antenna effect, harvesting the light and transferring the energy to BODIPY. The pseudo Stoke's shift enlarged to ～170 nm in solution. In film, the emission peak shifted to 563 nm in polycarbonate matrix. And it shifted further to 585 nm in solid due to the highly twisted structure, which avoided closely regular-tight packing. The dye rendered an intense fluorescence, good optothermal stability, and high fluorescence quantum yield (0.55). The solid emission showed highly red emission with Commission Internationale de L'Eclairage (CIE) coordinates of (X = 0.69, Y = 0.31). Thus, the synthesized dye is idea candidate for emitting materials.     

混合染料荧光选择性增强受激拉曼散射Stokes波

报道用不同混合比的罗丹明6G(R6G)和罗丹明B(RB)混合染料荧光选择性放大CCl₄和苯的受激拉曼散射不同阶次Stokes波。CCl₄二至五阶Stokes波分别被混合摩尔比为20∶2,20∶13及20∶40(R6g∶RB)的R6G和RB的混合染料荧光放大;一阶Stokes波强度被混合溶液削弱。这是由于到二至五阶Stokes波分别位于以上三种混合溶液荧光峰附近,并且都远离了R6G和RB的吸收峰,混合溶液的荧光增强作用大于吸收作用,因此这几阶Stokes被混合溶液荧光放大。而CCl₄的一阶Stokes位于RB吸收峰附近,又远离各混合溶液荧光峰,溶液的吸收作用大于荧光增强作用,导致一阶Stokes被混合溶液削弱。文章还报道了苯的一、二和三阶Stokes波分别被不同混合比的R6G和DCM的混合乙醇溶液放大,并预测了该方法应用前景。     

Enhanced sonocatalytic degradation of organic dyes from aqueous solutions by novel synthesis of mesoporous Fe3O4-graphene/ZnO@SiO2 nanocomposites

Fe₃O₄-graphene/ZnO@mesoporous-SiO₂ (MGZ@SiO₂) nanocomposites was synthesized via a simple one pot hydrothermal method. The as-obtained samples were investigated using various techniques, as follows: scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and specific surface area (BET) vibrating sample magnetometer (VSM), among others. The sonocatalytic activities of the catalysts were tested according to the oxidation for the removal of methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) under ultrasonic irradiation. The optimal conditions including the irradiation time, pH, dye concentration, catalyst dosage, and ultrasonic intensity are 60 min, 11, 50 mg/L, 1.00 g/L, and 40 W/m², respectively. The MGZ@SiO₂ showed the higher enhanced sonocatalytic degradation from among the three dyes; furthermore, the sonocatalytic-degradation mechanism is discussed. This study shows that the MGZ@SiO₂ can be applied as a novel-design catalyst for the removal of organic pollutants from aqueous solutions.     

Influence of the Structure of Water–Alcohol Solutions of Dyes on Their Molecular Association

The spectral and luminescence characteristics of water and water–ethanol solutions of dyes have been investigated. The efficiency of the process of association of dye molecules and the structure of the complexes formed depending on their concentration and the solvent composition have been established. The presence of inhomogeneities in the distribution of dissolved complex molecules in the water matrix which determine the high efficiency of the association processes in water solutions as compared with other solvents is shown. The characteristic sizes of these inhomogeneities have been estimated.