Thermal analysis of vinyl siding

Vinyl siding is typically produced by co-extruding a capstock (surface layer) over a PVC substrate formulation. The capstock is often non-PVC, these systems can result in warpage during or after production. In our study we will show that this warpage can result from an interfacial induced stress related to the mismatch between the glass transition of the substrate and the capstock. Additionally, both TMA and TMDSC were used to probe the stress release. Capstock formulations which better match the glass transition of the PVC substrate result in superior performance.     

AC calorimetric study of phase transitions in phosphatidylcholine-cholesterol systems

Using an ac calorimetric method, detailed behaviour of the heat capacity in dipalmitoyl-phosphatidylcholine-cholesterol system was studied in the cholesterol concentration less than 5 mol%. It was revealed that the heat capacity near the main transition was composed of at least four anomalies, i.e., multipeak took place in the heat capacity. This fact indicates that a simple theory explaining coexistence of two phases in two component systems does not work in the multipeak region. Then, relation between the multipeak heat capacity and the change of the ripple structure with the cholesterol concentration should be taken into account, when we consider thermodynamical behaviour of the systems.

---

Zusammenfassung Mittels AC-Kalorimetrie wurde bei Cholesterol-Konzentrationen von weniger als 5 mol% das Verhalten der Wärmekapazität im System Dipalmitoylphosphatidylcholin-Cholesterol untersucht. Es wurde gezeigt, daß sich die Wärmekapazität in der Nähe der Hauptumwandlung aus mindestens vier Anomalien zusammensetzt, d.h. bei der Wärmekapazität kann ein Multipeak beobachtet werden. Diese Tatsache zeigt, daß eine einfache Theorie, welche die Koexistenz zweier Phasen in einem Zweikomponenten-System erklärt, für die Multipeakregion nicht geeignet ist. Weiterhin sollte bei Überlegungen zum thermodynamischen Verhalten von Systemen eine Beziehung zwischen der Multipeak-Wärmekapazität bzw. der Welligkeitsstruktur und der Cholesterol-Konzentration berücksichtigt werden.

     

ADSORPTION OF 2,4-DICHLOROBENZOXYACETIC ACID ONTO HYPERCROSSLINKED RESIN MODIFIED BY PHENOLIC HYDROXYL GROUP (AM-1)

INTRODUCTIONAdsorption has been considered to be the best available technology for removing organics from water in the USSafe Drinking Water Act[1]. Due to many drawbacks of activated carbon[2-7], the most widely used adsorbent,hypercrosslinked polymeric adsorbents developed by Tsyurupa and Davankov[8] have been increasingly viewedas an alternative to activated carbon for selective removal of specific organic substances from contaminatedwater[9-12], and series of researches have been do…     

Chiral Recognition in π Complexes of Alkenes,Aldehydes, and Ketones with Transition Metal Lewis Acids; Development of a General Model for Enantioface Binding Selectivities

Prochiral alkenes, aldehydes, and ketones constitute the most frequently used starting materials for enantioselective organic syntheses. Protocols often involve chiral binding agents or Lewis acids that can give two diastereomeric adducts, the ratios of which are measures of chiral recognition. With π adducts, the diastereomers differ in the enantioface of the C?C or O?C group bound to the Lewis acid. This review provides the first comprehensive analysis of such equilibria and related binding phenomena with chiral transition metal Lewis acids. An extensive body of data from the authors' laboratory for complexes of the pyramidal rhenium fragment [(η⁵?C₅H₅)Re(No)(PPh₃)]⁺ ( I ) affords particular insight. Literature data for other complexes are also summarized. A general model for chiral recognition based upon the relative steric properties of four quadrants is presented. This enables binding selectivities to be individually and rationally optimized for different classes of ligands. Electronic effects are also identified and correlated with specific structural properties. Relationships between binding equilibria, reactivity, and product configurations are discussed.     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.     

Irreversible and reversible phase transitions of alkyl monolayers. Gas chromatographic evidence of polar solvent influence on the adsorbing properties of the layer

Summary Further to Gilpin's observations in liquid chromatography of the irreversible transformation of alkyl grafts, following the replacement of an organic mobile phase by an aqueous one, we describe some gas chromatographic experiments which lead to similar (log V_s, I/T) plots, as a consequence of the same solvent release process.We use paraffin films on siliceous supports or hydroxylated liquid substrates or C₂₂-alkyl bonded silica. These experiments demonstrate that this irreversible transition and the melting-like reversible transition are completely different phenomena. They confirm the existence of at least three kinds of monomeric alkyl films.     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

含L－氨基酸结构的手性液晶化合物的合成及其相变行为

合成了９种具Ｌ－氨基酸衍生物结构的介晶化合物（Ｉ－Ⅲ，Ⅳａｂ，Ⅴａ，ｂ，Ⅵａ，ｂ）、４种氨基酸衍生物（Ａ１－４）和６种介晶化合物（Ｍ１－６）．新化合物（Ⅰ－Ⅲ，Ⅳａ，ｂ，Ⅴａ，ｂ，Ⅵａ，ｂ，Ａ４，Ｍ３－６）的化学结构通过ＩＲ、１ＨＮＭＲ和元素分析证实；并用偏光显微观察和ＤＳＣ分析研究了其相变行为，结果表明有８种化合物（Ｍ３－６，Ⅵａ，ｂ，Ⅴｂ，Ⅵｂ）呈现液晶相变。测定了它们的比旋光度。通过Ｘ射线衍射研究了化合物Ⅵｈ１２０～１３０℃和Ⅵｂ１７０～１８０℃的近晶结构，Ⅵｂ显，Ⅵｂ呈。测定了化合物Ⅳｂ的电滞回线，证明其具铁电性。     

Theoretical investigation of the decarbonylation of acetaldehyde by Fe+ and Cr+.

We report a comprehensive theoretical study on the decarbonylation of acetaldehyde by Fe+ and Cr+. Various intermediates, transition states, and products involved in the decarbonylation reactions are fully optimized at the B3LYP/6-311+G(2df,2pd) level of theory. The potential energy surfaces (PESs) corresponding to [M,O,C2,H4]+(M=Cr and Fe) are examined in detail using B3LYP and CCSD(T) methods, respectively. The validity of these theoretical methods is calibrated with respect to the available thermochemical data. Calculations suggest that the Cr+ mediated decarbonylation of acetaldehyde takes place in four steps on the sextet surface: encounter complexation, C-C activation, aldehyde H-shift, and nonreactive dissociation, in good accordance with the Co+ mediated decarbonylation of acetaldehyde [Zhao, Zhang, Guo, Wu, Lu, Chem. Phys. Lett. 2005, 414, 28], while for the Fe+/acetaldehyde system decarbonylation can occur on both the quartet and the sextet PESs. The quartet pathway, which experiences spin-orbit coupling between the two surfaces, is energetically more favorable; whereas along the sextet decarbonylation coordinate several high-energy barriers are revealed. The theoretical results are compared with the experimental product kinetic energy and angular distributions of decarbonylation of acetaldehyde by Fe+ and Cr+ measured using a crossed-beam technique [Sonnenfroh, Farrar, J. Am. Chem. Soc. 1986, 108, 3521].