Thermolysis of polyethylene hydroperoxides in the melt. Part 9: Re-examination of the experimental kinetics of hydroperoxide decomposition

The experimental kinetics of decomposition of polyethylene hydroperoxides in the melt is re-examined. It is found that the rates determined are more accurate if only the “free” hydroperoxides are taken into account instead of the total hydroperoxides that include also the “associated” hydroperoxides. Then, decomposition of polyethylene hydroperoxides in the melt can be attributed unambiguously to a first-order reaction that is valid in the whole time range of the thermolysis experiments. Nevertheless, the first-order rate constant determined this way increases with the initial hydroperoxide concentration. This constitutes a significant difference with the first-order rate constants that are valid in low molecular mass chemistry and are independent of the initial concentration of the reacting species. It has already been concluded previously that this experimental first-order rate cannot be attributed to true monomolecular hydroperoxide decomposition. Hence, another or other reactions must be envisaged for the interpretation of the specific first-order decomposition of the hydroperoxides in polyethylene melts.     

[Mn(H_2P_2O_7)_3]~(3-)引发淀粉与丙烯腈接枝聚合反应的动力学研究

以[Mn(H_2P_2O_7)_3]~(3-)为引发剂,研究了丙烯腈与玉米淀粉的接枝共聚反应。由实验结果求出了反应速率与引发剂浓度、单体浓度、淀粉浓度和反应温度的关系,推导并验证了接枝反应动力学模型,探讨了反应机理,求得了接枝反应活化能。     

Translucent nanolatexes through emulsion polymerisation of ethyl acrylate

Turbid emulsion systems of ethylacrylate/sodium dodecyl sulphate/water with monomer to surfactant (M/S) ratios 10 and 40 were transformed into stable transparent/translucent nanolatexes through emulsion polymerisation using potassium persulphate as an initiator. The latex particle size was observed to be similar to that obtained by true microemulsion polymerisation where M/S ratio is one. The kinetic plots exhibited two intervals upto M/S ratios 10. AIBN initiated systems showed separation of two phases for the M/S ratio ?10. M/S ratios were varied from 1 to 54 for the comparative study of polymerisation in emulsion and microemulsion media. Gel effect dominance was observed around 40-60% conversion for the microemulsion polymerisation of ethylacrylate. Only one chain per particle was observed for microemulsion system with M/S ratio 1 and three to four chains per particle were observed for the systems with M/S ratios 10 and 40. Unlike M/S=1 system, higher dependency of polymerisation rate on initiator concentration was observed for the systems with M/S=10 and 40. A possible mechanism for such a transformation has been proposed.     

Thermogravimetric study of the pyrolysis of waste wood

A thermogravimetric study of the pyrolysis of three different types of waste wood (forest wood, old furniture and used pallets) is carried out in a TGA equipment using dynamic and isothermal techniques. Isothermal runs were carried out at two temperature levels, one between 225° and 325°C (low range) and the other, between 700° and 900°C (high range). Results show a good agreement between the kinetic parameters obtained from either dynamic or isothermal techniques. It must be remarked that the own chemical composition of each type of wood together with the compounds added to the wood for each application, play a fundamental role in the kinetic behavior of their thermal decomposition.     

Reduction of soluble colloidal MnO<Subscript>2</Subscript> by <Emphasis Type="SmallCaps">DL</Emphasis>-malic acid in the absence and presence of nonionic TritonX-100

Kinetics of oxidation of DL-malic acid by water soluble colloidal MnO₂ (prepared from potassium permanganate and sodium thiosulfate solutions) have been studied spectrophotometrically in the absence and presence of nonionic Triton X-100 surfactant. The reaction is autocatalytic and manganese(II) (reduction product of the colloidal MnO₂) may be the autocatalyst. The order of the reaction is first in colloidal [MnO₂] as well as in [malic acid] both in the absence and presence of the surfactant. The reaction has acid-dependent and acid-independent paths and, in the former case, the order is fractional in [H⁺]. The effect of externally added manganese(II) is complex. The results show that the rate constant increases as the manganese(II) concentration is increased. It is not possible to predict the exact dependence of the rate constants on manganese(II) concentration, which has a series of reactions with other reactants. In the presence of TX-100, the observed effect on k is catalytic up to a certain [TX-100]; thereafter, an inhibitory effect follows. The catalytic effect is explained in terms of the mathematical model proposed by Tuncay et al. (in Colloids Surf A Physicochem Eng Aspects 149:279 3). Activation parameters associated with the observed rate constants (k_obs/k) have also been evaluated and discussed.     

聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

Syntheses, spectroscopic characteristics and thermolytic rearrangements of bis-[(trimethylgermyl)methyl]platinum(II) and bis-[(trimethylstannyl)methyl]platinum(II) complexes

The preparations and spectroscopic characteristics are reported of a series of (trimethylgermyl)methyl- and (trimethylstannyl)methylplatinum(II) complexes with diene and P-donor ancillary ligands, cis-Pt(CH₂GeMe₃)₂L₂ (L = PPh₃ or PPh₂Me; L₂ = dppe or cod) and cis-Pt(CH₂SnMe₃)₂L₂ (L = PPh₃; L₂ =cod). Thermolysis of toluene solutions of cis-Pt(CH₂GeMe₃)₂(PPh₃)₂ leads to cis-Pt(Me)(CH₂GeMe₂CH₂GeMe₃)(PPh₃)₂ via β-alkyl migration, after (non-rate-limiting) phosphine dissociation. Estimated activation parameters (ΔH_{298 K}^‡ = 126 ± 3 kJ mol⁻¹, ΔS^‡ = + 17 ± 7 J mol⁻¹ K⁻¹ and hence Δ_{298 K}^‡ = 121 ± 5 kJ mol⁻¹) suggest that this system is more migration labile than its silicon analogue, primarily as a result of a lower activation enthalpy. While cis-Pt(CH₂GeMe₃)₂(PPh₂Me)₂ reacts similarly but less readily, Pt(CH₂GeMe₃)₂(dppe)₂ is inert at operable temperatures. Thermolysis of Pt(CH₂GeMe₃)₂(cod) generates 1,1,3,3,-tetramethyldi-1,3-germacyclobutane as the major organogermanium product, while from cis-Pt(CH₂SnMe₃)₂(PPh₃)₂, 1,1,3,3-tetramethyldi-1,3-stannacyclobutane predominates. Mechanistic implications are discussed.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 28: Formal kinetics of aldehyde and carboxylic acid formation in the advanced stages

The rate of acid formation at high temperature is constantly increasing but temperature independent. Two main mechanisms can account for this behavior in the advanced stages of polyethylene processing. The first mechanism is based on free radical induced oxidation of aldehyde pairs that are formed on acid-catalyzed decomposition of allylic hydroperoxides. The last will be formed essentially on mechanical stress-induced oxygen addition to trans-vinylene groups. Peroxidation of one of the aldehydes might yield an acyl-peroxy radical that is likely to abstract the labile hydrogen atom from the second aldehyde. The acyl radical formed in the reaction will abstract a hydroxyl group from the peracid formed in the same reaction. This yields an acid and an acyl-oxy radical that will give a primary alkyl radical on decarboxylation. The second mechanism involves oxidation of ketones and alcohols that accumulate in the oxidizing melt. Acid-catalyzed decomposition of the α-keto-hydroperoxides yields simultaneously an acid and an aldehyde. Formal kinetics based on each mechanism shows that they do not involve significant activation energy, as it is required by the experimental data. The dependency on the oxygen concentration deduced from the formal kinetics for the oxidation of aldehyde pairs is in agreement with the experiments.     

Synthesis of poly(<Emphasis Type="Italic">N</Emphasis>-methylolacrylamide)/polymethylacrylamide hybrids via frontal free-radical polymerization

In this study, poly(N-methylolacrylamide)/polymethylacrylamide (PNMA/PMAA) hybrids were produced successfully by frontal free-radical polymerization at ambient pressure. In a typical run, the appropriate amounts of reactants (N-methylolacrylamide, NMA; methylacrylamide, MAA) and initiator (ammonium persulfate) were dissolved in dimethyl sulfoxide at ambient temperature. Frontal polymerization (FP) was initiated by heating the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self-propagate throughout the reaction vessel. Once initiated, no further energy was required for polymerization to occur. The dependences of the front velocity and front temperature on the initiator concentration, reactant dilution, and NMA/MAA components were thoroughly investigated. The front temperatures were between 69 and 116 °C, depending on the persulfate concentration. We have also investigated the FP of PNMA/PMAA hybrids with N-methyl-2-pyrrolidone as solvent. Results show that FP can be exploited as a means for the preparation of PNMA/PMAA hybrids with the potential advantage of higher throughput compared to the traditional mode.     

A Basis for Orbital Symmetry Rules

The influence of molecular symmetry on reaction rates is examined with an approach in which reactions are viewed as electronic transitions between states of reacants and products (described, in turn by quasiadiabatic potential surface). The moleculer Hamiltonian is used to derive selection rules for these transitions. The complete Hamilatonian has no useful symmetery. Neglect of non-Born-Oppenheimer and spin-orbit terms (and of other angular momentum coupling terms) leads to an apporixmate Hamiltonian and to selection rules which from the basis of the Woodward-Hoffmann rules. This apporch provides an alternative to the adiabatic potantial surfaces, reaction coordinates, and transition state theory used in more familiar discussions of the Woodward-Hoffmann rules. Further, it provides a particulary clear method for discussing violations of these symmetry rules, and for differentiating concerted and nonconcerted reactions.