油菜叶片和冠层水平氮素含量的高光谱反射率估算模型

通过设计实验首先确定是否可以用油菜叶片反射率光谱预测其氮素含量,以及是否可以用预测的光谱特征值与氮素含量建立相关模型。实验结果表明,反射率光谱的转化形式R的一阶微分为预测油菜氮素含量的最佳形式,最佳波段选择与其他研究结果相似。短波红外光谱波段能较好预测氮素含量,但是选择的高相关性短波红外区域一般都较窄,因此可用高光谱和高辐射分辨率来准确描述油菜光谱特征。短波红外反射率的变化主要是由于植被化学信号的改变而引起的。直接太阳辐射率、观测设备、叶片振动以及大气湿度的细微变化都可能引起光谱一阶微分的变化。冠层反射率一阶微分R′建立的逐步回归模型拟合度较高。     

基于NPP-VIIRS夜间灯光数据的山西省GDP空间化模拟

选取山西省为研究对象,以美国国家极轨合作仪件-可见红外成像辐射计套件（NPP-VIIRS）夜间灯光数据、GDP统计数据等为数据源,构建GDP空间化拟合模型,建立山西省GDP密度图,据此研究山西省经济的空间差异性。通过对NPP-VIIRS夜间灯光数据的空间化处理,提取灯光指数,并将其与GDP进行回归拟合,建立最佳回归模型,得到GDP密度拟合图;利用县级GDP数据进行线性纠正,从而提高GDP的模拟精度。结果表明：（1）NPP-VIIRS夜间灯光数据与GDP的相关性较高,可用于山西省GDP模拟;（2）与GDP分区建模相比,GDP整体建模的精度更高;（3）山西省GDP的空间分布整体呈由城市中心逐渐向周边辐射的特点,构成GDP过渡带。     

增量式Huber-支持向量回归机算法研究

传统的面向支持向量回归的一次性建模算法中样本增加时,均需从头开始学习,而增量式算法可以充分利用上一阶段的学习成果。SVR的增量算法通常基于ε-不敏感损失函数,该损失函数对大的异常值比较敏感,而Huber损失函数对异常值敏感度低。所以在有噪声的情况下,Huber损失函数是比ε-不敏感损失函数更好的选择,在现实情况当中。基于此,本文提出了一种基于Huber损失函数的增量式Huber-SVR算法,该算法能够持续地将新样本信息集成到已经构建好的模型中,而不是重新建模。与增量式ε-SVR算法和增量式RBF算法相比,在对真实数据进行预测建模时,增量式Huber-SVR算法具有更高的预测精度。     

高反射膜激光零几率损伤阈值的实验研究

在确定光学薄膜激光损伤阈值的实验数据处理过程中,发现一些样品的数据点分布偏离直线型式。对此,用国际标准规定的零几率来确定损伤阈值的同时,对测试数据点采用了不同的非直线拟合,也得到一个零几率损伤阈值。比较两者差异,并与实验测试结果对照,发现这些样品采用非直线拟合得出的零几率损伤阈值与实际情况更接近一些。     

Classical Backfitting for Smooth-Backfitting Additive Models

Smooth backfitting has been shown to have better theoretical properties than classical backfitting for fitting additive models based on local linear regression. In this article, we show that the smooth backfitting procedure in the local linear case can be alternatively performed as a classical backfitting procedure with a different type of smoother matrices. These smoother matrices are symmetric and shrinking and some established results in the literature are readily applicable. The connections allow the smooth backfitting algorithm to be implemented in a much simplified way, give new insights on the differences between the two approaches in the literature, and provide an extension to local polynomial regression. The connections also give rise to a new estimator at data points. Asymptotic properties of general local polynomial smooth backfitting estimates are investigated, allowing for different orders of local polynomials and different bandwidths. Cases of oracle efficiency are discussed. Computer-generated simulations are conducted to demonstrate finite sample behaviors of the methodology and a real data example is given for illustration. Supplementary materials for this article are available online.     

Characterisation of PDO olive oil Chianti Classico by non-selective (UV–visible,NIR and MIR spectroscopy) and selective (fatty acid composition) analytical techniques

An authentication study of the Italian PDO (protected designation of origin) extra virgin olive oil Chianti Classico was performed; UV–visible (UV–vis), Near-Infrared (NIR) and Mid-Infrared (MIR) spectroscopies were applied to a set of samples representative of the whole Chianti Classico production area.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.     

Functional connectivity between task-positive and task-negative brain areas and its relation to working memory performance

Functional brain imaging studies have identified a set of brain areas typically activated during cognitive tasks (task-positive brain areas) and another set of brain areas typically deactivated during cognitive tasks (task-negative brain areas). Negative correlations, or anticorrelations, between task-positive and task-negative brain areas have been reported at rest. Furthermore, the strength of these anticorrelations appears to be related to cognitive function. However, studies examining anticorrelations have typically employed global regression or similar analysis steps that force anticorrelated relationships to exist between brain areas. Therefore the validity of these findings has been questioned. Here we examine anticorrelations between a task-negative region in the medial frontal gyrus/anterior cingulate cortex and dorsolateral prefrontal cortex, a classic task-positive area, using an analysis that does not include global regression. Instead, we control for whole-brain correlations in the group-level analysis. Using this approach, we demonstrate that the strength of the functional connection between the medial frontal cortex and the dorsolateral prefrontal cortex is related to cognitive function and that this relationship is not an artifact of global regression.