Analytical Designing of Two-Aspherical-Mirror Anastigmats Permitting Practical Misalignments in a Soft-X-Ray Optics

A new analytical method of designing two-aspherical-mirror anastigmats was developed and applied to searching solution groups of soft X-ray microscopes of a large misalignment tolerance. The two-mirror anastigmat configurations were expressed by a practical variable related to pupil obstruction limiting the system throughput. Axial coma and other aberrations caused by a slight decenter of the system were then formulated to represent sensitivity to misalignment. These formulations enabled a global survey of solution groups as demonstrated by a designing example of soft X-ray microscopes with a magnification m = −1/50, which resulted in four solutions more insensitive to misalignment than a standard Schwarzschild optics in the soft X-ray region. Some solutions were also found to have much larger fields of view suitable for high resolution imaging as confirmed by computer ray tracing.     

Observation of baker’s yeast strains used in biotransformation by atomic force microscopy

Different strains of baker’s yeast(Saccharomyces cerevisiae) were imaged with an atomic force microscope (AFM). The images of uncoated and nonfixed samples were reproducible with high-constrast and nanometer-resolution. Molecules from the polysaccharide surface of the cell wall were pictured and the distance of atoms was measured. The preparation of samples was easy, suggesting that AFM is a useful tool in this type of analyses.     

超高感彩卷乳剂微晶体电镜研究

应用物理和化学相结合的方法，将超高感彩卷分层剥离，离心沉降，水洗除胶，电镜观测各层乳剂的微晶体结构。揭示了超高感彩卷各乳剂层的结构情况，披露了超高感彩剂制造技术。     

电子显微技术应用于生物纳米材料表征与测试的研究进展

该文简述了电子显微技术的发展历程,并介绍了现代电子显微镜的新功能。针对生物纳米材料理化性能与功能应用的特殊性,结合研究实例,重点阐述运用电子显微结构表征与原位分析测试技术指导构建新颖纳米结构、揭示材料与细胞/组织相互作用并发挥功能的机制。并在此基础上,展望了电子显微技术在生物纳米材料研究领域的发展方向(大尺寸图像拼接、三维重构、动态原位实时成像)。     

聚苯胺纳米点阵列的制备和库仑台阶现象

本文制备了PANI纳米点阵列, 利用导电原子力显微镜(C-AFM)表征了其形貌和导电性能, 在室温下观察到PANI纳米点的库仑台阶(Coulomb staircase)现象, 并利用库仑阻塞效应的理论进行了初步的分析.     

利用AFM和SNOM对淋巴细胞膜表面超微结构及其光学性质的初步研究

利用原子力显微镜(Atomic Force Microscopy，AFM)对淋巴细胞表面形貌进行了形态学的初步研究，观察到了其膜表面其他显微技术所不能发现的超微结构．同时也运用扫描近场光学显微镜(Scanning Near field Optical Microscopy，SNOM)对淋巴细胞进行成像，观察了其对光的透射、吸收等光学性质，并对两种成像方法进行了比较．研究发现：淋巴细胞膜表面凹凸不平，分布着大量直径几十到几百纳米不等的小颗粒；淋巴细胞中央部位有自发荧光现象．结果表明，AFM和SNOM可作为进一步探讨淋巴细胞的结构与功能关系的有力工具．     

Surface structures of adsorption layers of sodium hyaluronate and bovine serum albumin complexes on poly(γ-methyl-l-glutamate) film and their surface properties

Two-dimensional structures and characteristics of the complexes between sodium hyaluronate (NaHA) and bovine serum albumin (BSA) were studied by using a quartz crystal microbalance method and an atomic force microscope (AFM). NaHA did not adsorb on poly(-methyl-l-glutamate) (PMLG) film. On the other hand, the complexes adsorbed on it and the adsorption behaviors were found to be Langmuir types. With increasing weight ratio of BSA to NaHA, W _BSA, the adsorption constants K decreased and the saturated adsorption masses increased. The adsorbed complexes were spherical particles and at saturated adsorption states they covered compactly on the PMLG film. The mean diameters d _AFM estimated from the topographic images decreased from 70 to 54 nm with increasing W _BSA. The adhesion force F _ad and the frictional force F _f between the complex layers and the AFM tip were obtained by using the contact mode of the AFM. With increasing W _BSA, the values of F _ad decreased and the values of F _f increased. Compared with the frictional coefficient of the NaHA adsorption layer on the BSA monolayer, the values for the NaHA–BSA complex layer were found to be much higher.     

透射电镜像转角的测定及应用

论述了完全标定透射电镜像转角所需拍摄的二次曝光电子显微像的数量,推导了由已测的像转角间接计算其它像转角的一般公式,以Philips Cm200电镜为实例,说明了测定像转角的基本步骤,并以实例说明怎样利用像转角,把衍射花样的晶体学信息传递给电子显微像。     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

TiO2纳米膜表面结构形态特征

采用反胶束法制备TiO2纳米溶胶,用浸渍提拉法在不同的条件下制备了三种TiO2多孔纳米薄膜,并利用AFM、SEM、XRD等方法对膜表面结构物理化学特性进行表征.结果表明三种膜基本上由粒径约为59 nm的纳米粒子以不同的方式堆积而成,溶胶刚生成时浸提一次,干燥、焙烧得到膜上纳米粒子分布均匀,所生成的二次粒子粒径最小,二次粒子形成的二次表面粗糙度最小,浸提10次得到膜上纳米粒子间存在较丰富缝隙结构,二次粒子粒径及其形成的表面粗糙度较大,而溶胶制备好陈化6 h后浸提得到的膜上二次粒子粒径最大,表面粗糙度最高.由分形理论估算得到三种膜的分形维数分别是2.22、2.20和2.27. XRD测试表明,膜上TiO2为锐钛矿晶相.这些结果表明,采用不同制备步骤得到的膜,其表面结构形态存在较大的差异.