The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Polyol-Metall-Komplexe. 25. rac-Mannose,rac-Arabit und L-Threit als deprotonierte Liganden in Ferraten(III)

Polyol Metal Complexes. 25. rac-Mannose, rac-Arabitol and L -Threitol as Deprotonated Ligands in Ferrates(III ) Ba₂[Fe₂(β-rac-ManfH_?5)₂] · 12H₂O ( 1 ), Sr₄[Fe₄(rac-Arab1,2,3,5H_?4)₄(OH)₂]CO₃ · 33 H₂O ( 2 ), and Ba₂[Fe₂(L-ThreH_?4)₂(OH)₂] · 12.5 H₂O ( 3 ) (Man = mannose, Arab = arabitol, Thre = threitol) have been crystallized from alkaline aqueous solution. Crystal structure analysis revealed dinuclear ferrate(III ) ions for 1 and 3 , the former being a C_i-symmetrical homoleptic ferric complex with pentadentate pentaanions derived from racemic β-mannofuranose. In 3 , besides tetradentate L -threitolato ligands, there is one terminal hydroxo ligand at each ferric center. Hydroxo ligands are also present in the C_i-symmetrical hexaanions of 2 , which are tetranuclear planar entities built up from four edge-sharing FeO₆ octahedra. However arabitol is a pentitol, the tetraanionic ligands are only tetradentate for steric reasons.     

Studies on Amidothiosemicarbazides and Related Hcterocyclic Derivatives ( XIII) --Synthetic Studies on 2-(3-Pyridyl)-5-Arylamino- 1,3, 4-Thiadiazoles and Oxadiazoles

By ring-closure of 1-nicotinyl-4-arylthiosemicarbazides under the catalysis of concentrated sulfuric acid or mercuric acetate, a series of 2-(3-pyridyl)-5-arylarnino-1,3,4-thiadiazoles and 2-(3-pyridyl)-5-ary-lamino-1,3,4-oxadiazoles were synthesized, respectively. All the products were subjected to testing of biological activity. Furthermore, the IR, 1H NMR and MS spectral properties of these new compounds were studied in details and some significant conclusions were drawn.     

Amperometric Determination of lndole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

Platinum nanowire （PtNW） can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm. The PtNW and multiwalled carbon nanotubes （CNT） are then dispersed into chitosan （CHIT） solution. The resulting PtNW-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of PtNW and CNT. By dropping the PtNW-CNT-CHIT film onto the glassy carbon （GO） electrode surface, and after evaporation an amperometric sensor for the determination of indole-3-acetic acid （IAA） was developed. The oxidation current of IAA increased significantly at the PtNW-CNT-CHIT film coated GC electrode, in contrast to that at the CNT-CHIT modified GC. The linear response of the sensor is from 50 ng/ml to 50 μg/ml with a detection limit of 25 ng/mL.     

Photocleavage studies of fluorescent amino acid conjugates bearing different types of linkages

The synthesis and photochemistry of 3-oxo-3H-benzopyran derivatives linked through ester, anhydride, urethane and carbonate bonds to representative l-amino acids, at the amino and carboxylic acid groups at the main chain or the hydroxyl group at the side chain, were carried out. The stability to photolysis of the resulting conjugates was studied at different wavelengths of irradiation (254, 300 and 350 nm), the anhydride and ester linkages being the most sensitive in the studied conditions.     

含1,3-亚丙基冠醚的合成

为了进一步研究亚丙基冠醚的络合行为,合成了三种含1,3-亚丙基冠醚,即2,3-苯并-1,4,7,11-四氧-环十三-2-烯(苯并-13-冠-4)(1)、2,3-苯并-1,4,8,11,14-五氧-环十七-2-烯(苯并-17-冠-5)(2)、2,3-苯并-1,4,7,10,14,17-六氧-环十九-2-烯(苯并-19-冠-6)(3)。通过元素分析、红外光谱、质谱、核磁共振谱和 X-衍射晶体结构分析,确证了它们的结构。     

O（^3P）原子与丙醛和正丁醛化学反应动力学研究

我们已对O(~3p)原子和酮类分子化学反应速率常数进行了系列测定,分析讨论了羰基对O(~3p)抽提氢原子反应速率的影响,关于O(~3p)与醛类分子反应速率的测定也有报道。本文用流动微波放电-化学发光光子计数方法测定O(~3p)原子与丙醛和正丁醛化学反应速率常数及其与温度的关系,并由动力学数据对醛基中C—H键的离解能进行了讨论。     

Defect clusters and precipitation/oxidation of MgO-Co1−xO solid solution

MgO and Co_1−xO powders in 9:1 and 1:9 molar ratio (denoted as M₉C₁ and M₁C₉, respectively) were sintered and homogenized at 1600°C followed by annealing at 850°C and 800°C, respectively to form defect clusters and precipitates. Analytical electron microscopic observations indicated the protoxide remained as rock salt structure with complicated planar diffraction contrast for M₉C₁ sample, however with spinel paracrystal precipitated from the M₁C₉ sample due to the assembly of charge- and volume-compensating defects of the 4:1 type, i.e., four octahedral vacant sites surrounding one Co³⁺-filled tetrahedral interstitial site. The spacing of such defect clusters is 4.5 times the lattice spacing of the average spinel structure of Mg-doped Co_3−δO₄, indicating a higher defect cluster concentration than undoped Co_3−δO₄. The {111} faulting of Mg-doped Co_3−δO₄/Co_1−xO in the annealed M₁C₉ sample implies the possible presence of zinc blend-type defect clusters with cation vacancies assembled along oxygen close packed (111) plane.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).