OUH体系的结构和分析势能函数

采用密度泛涵B3LYP方法优化出了OUH分子的各种结构，确定了最稳定构型和离解能，以及它们的谐性力常数，并导出双原子分子UH,UO的Murrell-Sorbie势能函数及其光谱数据。采用多体项展式方法，导出OUH(X^4A')基态分子的分析势能函数，获得OUH(X^4A')体系的势能面，考察了这个势能函数的基本性质，正确地复现出OUH分子的平衡结构特征，结果表明：U+OH,O+UH,H+UO的反应均为无阈能的放热能反应。为进一步探讨OUH体系的反应动力学过程打下了基础。     

Structure and Phase Transitions of SnP2O7

SnP₂O₇ is a member of the ZrP₂O₇ family of materials, several of which show unusual thermal expansion behavior over certain temperature ranges and which show a number of displacive phase transitions on cooling from high temperature. Here we describe the structural properties of SnP₂O₇ from 100 to 1243 K as determined by X-ray and neutron powder diffraction. These studies reveal that SnP₂O₇ shows two phase transitions in this temperature range. At room temperature the material has a pseudo-cubic 3×3×3× superstructure. Electron diffraction studies show that the symmetry of this structure is P2₁3 or lower. On warming to ∼560 K it undergoes a phase transition to a structure in which the subcell reflections show a triclinic distortion; above 830 K the subcell reflections show a rhombohedral distortion. Significant hysteresis in cell parameters is observed between heating and cooling. The structure of SnP₂O₇ is discussed with references to other members of the AM₂O₇ family of materials.     

Quantitative determination of sotolon, maltol and free furaneol in wine by solid-phase extraction and gas chromatography-ion-trap mass spectrometry

A method for the analytical determination of sotolon [4,5-dimethyl-3-hydroxy-2(5H)-furanone], maltol [3-hydroxy-2-methyl-4H-pyran-4-one] and free furaneol [2,5-dimethyl-4-hydroxy-3(2H)-furanone] in wine has been developed. The analytes are extracted from 50 ml of wine in a solid-phase extraction cartridge filled with 800 mg of LiChrolut EN resins. Interferences are removed with 15 ml of a pentane-dichloromethane (20:1) solution, and analytes are recovered with 6 ml of dichloromethane. The extract is concentrated up to 0.1 ml and analyzed by GC-ion trap MS. Maltol and sotolon were determined by selected ion storage of ions in the m/z ranges 120-153 and 79-95, using the ions m/z 126 and 83 for quantitation, respectively. Furaneol was determined by non-resonant fragmentation of the m/z 128 mother ion and subsequent analysis of the m/z 81 ion. The detection limits of the method are in all cases between 0.5 and 1 microg l(-1), well below the olfactory thresholds of the compounds. The precision of the method is in the 4-5% range for levels in wine around 20 microg l(-1). Linearity holds at least up to 400 microg l(-1), and is satisfactory in all cases. The recoveries of maltol and sotolon are constant (70 and 64%, respectively) and do not depend on the type of wine. On the contrary, in the case of furaneol, red wines show constant and high recoveries (97%), while the recoveries on white wines range between 30 and 80%. Different experiments showed that this behavior is probably due to the existence of complexes formed between furaneol and sulphur dioxide or catechols. Sensory experiments confirmed that the complexed forms found in white wines are not perceived by orthonasal olfaction, and that the furaneol determined by the method can be considered as the free and odor-active fraction.     

Robust interface on ENR-50/TiO2 nanohybrid material based sol-gel technique: Insights into synthesis,characterization and applications in optical

In this work, the sol–gel technique was used to prepare a new organic–inorganic hybrid from Epoxidized Natural Rubber (ENR-50) and Titanium dioxide (TiO₂) by blending different content of titania precursors (10, 30, and 50 wt%) with an ENR-50 matrix. A wide range of analyses was conducted to understand the nature of this hybrid and also to evaluate its potential uses in applications required high refractive index such as micro optical and optoelectronic devices. Results indicated that the ring-opening reaction of epoxide groups in ENR-50 increased with the increase of titania content in the hybrid resulting a strong bonding between titania and ENR-50 through TiOC bond, which was observed in FTIR spectrum at 1027–1028 cm⁻¹. It is also observed a slight decrease in the intensity of the amorphous peak along with a new crystalline peak appeared at 2θ = 23 and 27° due to the crystalline nature of titania. The hybrids showed three thermal degradation steps in the range of temperature 76 to 769 °C due to the existence of the Ti moieties with the mixture of polymer chains, which in turn shifted the T_g at 24.3, 26.9 and 28.1 °C for the hybrid at 10, 30, and 50 wt% TiO₂ compared to the T_g of ENR-50 at −18.4 °C respectively. The morphology of the ENR-50 showed clear changes during of the synthesis of ENR-50/TiO₂ hybrids, these changes were proven by SEM, TEM, and AFM analyses. Uv–Vis results showed that the higher wavelength peak at 293 nm has shifted to 296, 298 and 300 nm for the hybrid at 10, 30, and 50 wt% TiO₂ respectively due to the strong interaction between titania precursors and ENR-50 matrix. Furthermore, the hybrids showed good optical transparency in the visible light range.     

The Dowd-Beckwith ring expansion: a theoretical study

UB3LYP/6-311++G(d,p) and ROMP2/6-311++G(d,p)//UB3LYP/6-311++G(d,p) calculations including the effect of benzene solvent through the PCM-UAHF method render a concerted mechanism without fragmentation as the most favourable one for the Dowd-Beckwith radical ring expansion of the bromomethyl adduct of methyl cyclopentanone-2-carboxylate to yield methyl cyclohexanone-3-carboxylate. The corresponding concerted TS is a bicyclic alcoxy radical.     

Palladium-catalyzed ring expansion reaction of 1-alkynylcyclobutanols with aryl iodides: an efficient route to 2-disubstituted methylenecyclopentanones

The reaction of 1-alkynylcyclobutanols with aryl iodides in the presence of Pd(OAc)₂ and Et₃N in acetonitrile at 80°C for 24 h gives 2-disubstituted methylenecyclopentan-1-ones in modest to good yields. The tandem insertion-ring expansion process proceeds via the formation of an alkynyl π-complex, followed by migration of a carbon-carbon bond of the tert-alkanol to form the cyclopentanones stereoselectively.     

Stereoselective synthesis of the octahydroisobenzofuran skeleton of the eunicellins

A de novo asymmetric synthesis of the octahydroisobenzofuran skeleton contained within the eunicellin family of natural products has been completed. The key transformations involve the convergent assembly of a tetrasubstituted tetrahydrofuran by condensation of a functionalised allylsiloxane with an aldehyde; controlled epimerisation of a C4 aldehyde by intramolecular trapping; installation of the isopropyl substituent by stereoselective Michael addition to a 5,5-bicyclic enone; and ring expansion of the 5,5-system to the target structure by radical-mediated cyclopropane fragmentation.     

二硫化锡基钠离子电池负极材料的研究进展

二硫化锡由于其理论容量高、氧化还原电位合适，而成为钠离子电池负极材料的研究热点之一。从纯二硫化锡、二硫化锡/碳复合物和二硫化锡/石墨烯复合物等3个方面对二硫化锡负极材料在近5年的发展进行了概述。     

Role of resonances in building cross sections: Comparison between the Mittag–Leffler and the T‐matrix Green function expansion approaches

Peaks in collision cross sections are often interpreted as resonances. The complex dilation method, as well as other methods relying on analytic continuation of the scattering formalism, can be used to clarify whether these structures are true resonances in the sense that they are poles of the S‐matrix and the associated Green function. The performance of the Mittag–Leffler expansion and T‐matrix Green function expansion methods are formally and computationally compared. The two methods are applied to two model potentials. Eigenenergies, s‐wave residues, and cross sections are computed with both methods. The resonance contributions to the cross sections are further analyzed by removing the residue contributions from the Mittag–Leffler and Green function expansion sums, respectively. It is suggested that the contribution of a resonance to a cross section should be defined through its S‐matrix residue. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Theoretical study of molecular conduction: I. Effective Green's function based on perturbation theory

There have been many experimental and theoretical studies on molecular conduction, as it is a fundamental parameter in the study of molecular‐scale electronics. We have investigated the features of molecular conduction using a Green's function method, which has often been used to solve problems in quantum transport and is also effective in elucidating electron transport in molecules. We have obtained the novel effective Green's functions, including the first‐order energy corrections, by accommodating the self‐energy of the electrodes as perturbation terms. Although these approximate Green's functions only provide information on the first‐order energy corrections, they can involve the elementary properties of molecular conduction. We propose a scheme for the analysis of the relations between molecular orbitals and their roles in molecular conduction and present analytical calculations for normal and cyclic polyenes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006