High speed liquid chromatography with small bore columns

Using a specially designed column system, we have systematically investigated the effect of mobile phase velocity on column efficiency. The performance of small bore columns operated at different linear velocities of mobile phase was examined for three different types of injection system. Using the value of H^∞/u or n^∞/t${}_{\text{r}}^{\text{º}}$ as a criterion of a high speed separation, we calculated values of n/t${}_{\text{r}}^{\text{º}}$ for different solutes according to the equation \documentclass{article}\pagestyle{empty}\begin{document}$ {{\rm n}\mathord{\left/ {\vphantom {{\rm n} {{\rm t}_{\rm r}^ \circ }}}\right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }} = {{{\rm n}^\infty } \mathord{\left/ {\vphantom {{{\rm n}^\infty } {{\rm t}_{\rm r}^ \circ }}} \right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }}\left({\frac{{1 + {\rm k'}}}{{{\rm k' + }\beta }}} \right)^2 $\end{document}; the results obtained are in agreement with the experimentally determined values. These systematic investigations culminated in the separation of seven compounds in less than 10 s; the respective chromatogram is shown.     

蛋白质组学和代谢组学在微生物代谢工程中的应用

构建微生物细胞工厂是化学品、生物能源以及药物分子可持续生产的可行性策略。然而，微生物的代谢复杂、调控严谨，制约着目标产物高效合成。蛋白质组学和代谢组学可以从系统生物学角度分析酶和代谢物组分，从而理解复杂的生物系统，为微生物代谢工程改造提供重要线索。该文介绍了蛋白质组学和代谢组学在微生物代谢工程中的应用，包括基因组尺度代谢模型构建、菌株生物合成优化、指导菌株耐受性改造、限速步骤预测、植物次级代谢途径挖掘，从而为微生物合成天然产物提供新的基因或途径。在此基础上，该文还展望了生物大数据未来的发展方向。     

基于双尺度渐近分析的有限元算法

1．引言正如文山所说，由于复合材料和周期结构的材料系数ail（x）在局部区域内间断且跳跃性很大，加上区域内含有周期性洞穴或裂缝，且周期长度很小．一般而言，直接采用有限元方法进行数值模拟，其计算量大得惊人，甚至难以实现．文山针对这种特征，提出了一种可计算的双尺度渐近分析模式，本文在此基础上给出了相应的有限元算法，它包括：1．周期解在一个基本构造上的有限元计算；2．边界层的有限元计算．同时，给出了相应的误差分析．2．周期解的有限元计算首先考虑下列形式的边值问题；其中把，代E尸（on叫，iii（0关于E—（EI，ZZ…     

一类有条件异方差的非线性自回归模型的高阶矩

本文对一类非线性时间序列模型ｘｔ＝φ（ｘｔ－１，…，ｘｔ－ｐ）＋εｔｈ（ｘｔ－１，…，ｘｔ－ｐ）给出了高阶矩的存在条件。     

一般增长曲线模型参数阵的BLU估计

考虑一般增长曲线模型：Ｙ＝Ｘ１ＢＸ２＋εＥ（Ｖｅｃ（ε））＝０Ｖ（Ｖｅｃ（ε））＝σ２ＶＩｎ（Ｖ０）本文对任一可估函数ＫＢＬ给出了它的ＢＬＵ估计（最佳线性无偏估计），并得到了方差σ２的一个无偏估计．     

大口径光学元件波前调制PSD模拟分析

 使用PSD作为大口径光学元件表面加工质量的评价参数，针对不同的波前调制进行了初步的模拟计算，得到了不同调制频率和不同调制深度情况下的PSD曲线变化情况。当调制频率不同时，PSD曲线的突变部分会发生相应的频移，调制频率高则突变发生在空间频率较高的频段，同时PSD峰值不变。相对应调制深度不同时，PSD曲线的突变部份峰值发生变化，调制深度大则峰值大，与此同时峰值出现的位置不会发生变化。计算和分析结果表明PSD分析结果能够在频率域反应出元件表面受到的不同程度的调制信息。     

Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu–Se film

This paper describes the structural and optical properties of Cu–Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu–Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu–Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe₂. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu–Se films. Red shift and asymmetry of Raman mode characteristic for CuSe₂ enable us to estimate nanocrystal dimension. In the analysis of the far-infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell-Garnett approximation) and substrate, has been applied.     

Shock cooling of liquid nitrogen and superfluid helium

Abstract

Superfluid Helium (11) and liquid nitrogen are the only liquids which have been shown experimentally, to exhibit shock cooling. In the present paper we use the Landau model to demonstrate theoretically that the roton gap, which decreases with increasing density, plays the same role leading to shock cooling in liquid helium as the dissociation energy does in liquid nitrogen.     

粒度空间约简及其粗糙集模型研究

针对交可约粒度空间中覆盖、基和粒结构的关系,结合偏序关系的哈斯图,给出一种约简粒度空间的方法.另外,通过限定上、下近似算子的取值范围,重新定义了交可约粒度空间上的粗糙集模型,并讨论了其相关性质.     

A finite volume cell‐centered Lagrangian hydrodynamics approach for solids in general unstructured grids

A finite volume cell‐centered Lagrangian hydrodynamics approach, formulated in Cartesian frame, is presented for solving elasto‐plastic response of solids in general unstructured grids. Because solid materials can sustain significant shear deformation, evolution equations for stress and strain fields are solved in addition to mass, momentum, and energy conservation laws. The total stress is split into deviatoric shear stress and dilatational components. The dilatational response of the material is modeled using the Mie‐Grüneisen equation of state. A predicted trial elastic deviatoric stress state is evolved assuming a pure elastic deformation in accordance with the hypo‐elastic stress‐strain relation. The evolution equations are advanced in time by constructing vertex velocity and corner traction force vectors using multi‐dimensional Riemann solutions erected at mesh vertices. Conservation of momentum and total energy along with the increase in entropy principle are invoked for computing these quantities at the vertices. Final state of deviatoric stress is effected via radial return algorithm based on the J‐2 von Mises yield condition. The scheme presented in this work is second‐order accurate both in space and time. The suitability of the scheme is evinced by solving one‐ and two‐dimensional benchmark problems both in structured grids and in unstructured grids with polygonal cells. Copyright © 2013 John Wiley & Sons, Ltd.