飞秒时间分辨光抽运探测技术及进展

文章简要介绍了飞秒时间分辨光抽运探测技术以及作者所在实验室的最新研究进展．灵敏度和信噪比是实验中的重要参数，文章着重介绍了作者在这两方面的改进，从而可检测到更微弱信号，并降低了使用的激光功率．配合具有光学窗口的液氦低温系统，还可对更多领域的材料进行研究，其中包括高温超导、生物化学样品和纳米材料等，并可给出物质内部结构等方面的重要信息．     

On the size of small single-walled carbon nanotubes

We derive a formula relative to the diameter/length ratio of a small single-walled carbon nanotube by means of calculations referring to Fermi energy. These calculations arise from the consideration of the Fermi's velocity for a multiwalled carbon nanotube.     

折叠波导行波管切断匹配的设计

 利用电磁模拟软件,计算得到了H面渐变与E面渐变的楔形衰减器匹配效果,指出在相同渐变长度下,E面渐变匹配效果优于H面渐变。H面渐变衰减器反射主要来源于电场集中处,而E面渐变衰减器主要来源于渐变前部尖端处。在此基础上设计出了一种变形的匹配衰减器,即在E面渐变衰减器渐变开始处向前延伸一块薄片。计算结果与测试结果表明:与H面渐变和E面渐变的楔形衰减器相比,所设计衰减器在近截止频率处的匹配效果得到了明显的改善。     

密度比和吹风比对透平静叶气膜冷却的影响

燃气轮机中冷却空气和高温燃气的密度比和吹风比是影响透平叶片气膜冷却性能重要因素。本文采用压力敏感漆技术,对燃气轮机第一级静叶栅气膜冷却的冷却性能进行了实验研究。实验中测量了静叶栅在不同密度比（1．5／1．0）和不同吹风比条件下的冷却效率。密度比的改变射流的出口动量,造成射流出口的流动特征发生变化,从而影响冷却效率,影响...     

Comparison of CALIPSO and ground-based lidar profiles over Chung-Li, Taiwan

We report the first inter-comparison of vertical profiles of aerosols and clouds derived from space (CALIPSO) and ground based lidar over Chung-Li, Taiwan. Results show that inter-comparison is closer in case of aerosols than clouds. The strength/shortcoming of the comparison has been also discussed. An iterative calculation to retrieve extinction-to-backscatter ratio (lidar ratio) by using sun-photometer and CALIPSO data is also documented. By using the mentioned method, a mean lidar ratio of 23.5±8.2 sr was found. The derived lidar ratios are lower than former studies. The possible reasons for the difference have been discussed in this paper. The discussed methodology will be helpful to reduce the uncertainty of optical parameters derived from lidar data especially near the surface where the atmosphere is inhomogeneous.     

Developing an algorithm for compression, multiplexing and enhancement of multiple images

Image compression is one of the important fields that has useful applications in data storage and transmission. In this research a new algorithm is developed and tested for multiple-image compression and enhancement. The algorithm, in addition, is applied to multiple noisy images. Also, the effect of compression ratio on the peak signal to noise ratio (PSNR) is explored by applying different compression ratios. The developed algorithm gives good compression and noise immunity. It can be used for storage/transmission of encrypted and compressed information.     

基于MMPP的802.11网络性能

提出并建立了一个基于马尔可夫调制的泊松过程MMPP(M arkovModu lated Poisson Process)和间歇泊松过程IPP(Interrupted Poisson Process)的系统模型,从新用户的到达和系统中用户发起的新业务两个方面着手,考察了在受系统门限值约束情况下的接入系统的新用户数量和系统内用户发     

The application of Dirac matrices and Pauli matrices for the theory of plasticity

We are primarily concerned in this paper with the problem of plasticity. The solution of the problem of stress-increment for plasticity can be put into extremely compact form by famous Dirac matrices and Pauli matrices of quantum electrodynamics.     

双波长比值光谱差异度指数用于人体舌苔舌质分离

舌苔舌质信息定量描述作为中医舌诊的重要内容,直接影响到中医临床舌诊的准确性。基于生物医学光子学理论,利用高光谱技术,提出一种基于双波长比值光谱差异度指数进行人体舌质舌苔分离的光谱分析新方法。首先采集被测对象371.200～992.956 nm之间共343个波长的舌体高光谱信息,随机选取15位被测对象进行光谱特征分析。绘制15位被测对象舌质舌苔全波段光谱曲线并进行比较,通过观察发现,舌质舌苔反射光特征差异与血红蛋白在该波段的光学特征变化相吻合,在500～750 nm之间,水对光的吸收很少,而舌体表面布满血管,光的吸收主要受到血红蛋白的影响,基于舌质舌苔在573和700 nm两波段光谱吸收差异,计算双波长比值,提取舌质舌苔光谱特征差异度指数,根据个体差异,分别提取不同被测对象舌质舌苔光谱特征差异指标,进行舌质舌苔区域分离,实验结果发现,对同一被测对象舌体苔质提取光谱差异度指数SDI,舌苔舌质光谱差异度指数存在一定差异性,由于个体的不同,具有各自明显的舌质、舌体差异度指数分割线,实验结果表明,运用双波长比值光谱差异度指数的光学表达形式能够用于舌质舌苔分离,同时该方法也能够为进一步中医临床舌诊提供客观依据。     

铜纳米薄片双轴应变弹性响应的第一性原理研究

近年来,在纳米尺度的研究中应用到很多表面的技术和概念.然而,以往针对表面的研究中对象为单晶块体样品,这些研究结果将不再适用纳米材料.为了研究表面对纳米体系弹性响应的影响,选取较为简单的铜纳米薄片为研究对象,构建了铜（111）面和（001）面的薄片模型,使用第一性原理方法计算了铜纳米薄片的双轴泊松比,分析了纳米薄片与体材料的差异,研究不同厚度纳米薄片中表面对内层原子的影响.计算结果显示,表面原子层的双轴泊松比大于内部原子层,并且其收敛速度和数值大小均和薄片取向有关.根据双轴泊松比随厚度的变化特性,可以得到不同取向的纳米薄片中表面对弹性响应的临界厚度.