F-T合成Fe/Cu/K/Al2O3催化剂的结构性质、还原及碳化行为

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球状Fe/Cu/K/Al2O3催化剂, 结合TG、N2物理吸附、XRD、H2-TPR、CO-TPR、Mossbauer谱等表征手段, 研究焙烧温度对Fischer-Tropshc (F-T)合成铁基催化剂的结构性质、还原行为和碳化行为的影响. 结果表明, 较高的焙烧温度有利于碳酸盐的分解和结晶水的脱除, 促进了催化剂的还原. 随着焙烧温度的进一步升高, 催化剂的比表面积减小, 平均孔径增大, α-Fe2O3晶粒的粒径增大, 催化剂中金属与载体的相互作用增强, 从而削弱了CuO、K2O助剂的作用, 严重抑制了催化剂的还原和碳化.     

CO2在非质子溶剂与铁基离子液体复合体系中的吸收

选用非质子型有机溶剂聚乙二醇二甲醚(NHD)与N, N-二甲基乙酰胺(DMAC), 分别与BmimFeCl₄复配, 构建了BmimFeCl₄/NHD和BmimFeCl₄/DMAC复合铁基离子液体体系. 考察了温度、 BmimFeCl₄/溶剂的质量 比以及压力对CO₂在复合铁基离子液体体系中溶解行为的影响. 结果表明, 高压低温的吸收条件更利于CO₂ 的溶解, 当BmimFeCl₄/DMAC质量比为7∶3时, CO₂在BmimFeCl₄/DMAC复合体系中的亨利系数为0.9181 MPa·L·mol^-1, 低于同等条件下BmimFeCl₄/NHD体系的亨利系数. 在常压、 363.2 K条件下进行再生, 经5次循环后, CO₂在BmimFeCl₄/NHD和BmimFeCl₄/DMAC中的溶解度分别为初次吸收量的92.53%和99.04%. 傅里叶变换红外光谱(FTIR)结果表明, 铁基离子液体复配体系吸收CO₂为物理吸收过程. 密度泛函理论(DFT)计算与IRI分析的结果表明, 在复配DMAC的体系中, CO₂更倾向与阳离子和溶剂分子作用, 而在复配NHD的体系中, CO₂则更容易与阴离子和溶剂分子作用.     

BiPbSbSrCaCuO的超导电性

据报,在BiPbSrCaCuO中加Sb形成BiPbSbSrCaCuO体系的T_c可达130K。但其组成、结构、性质等均未见详细报道。我们合成了一系列BiPbSbSrCaCuO,发现了一个具有2212相结构、但T_c却为～110K的超导相。 试样制备包括将Bi_2O_3,PbO,Sb_2O_3,SrCO_3,CaO和CuO(AR级)混匀、碾磨、于     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

Intrinsic thermal stability and quenching recovery of thin-film superconductors with thermal boundary resistance

The stability behaviour of a thin-film superconductor under a localized release of thermal disturbance is investigated. Two-dimensional conjugate film/substrate conduction equation with anisotropic thermal conductivity of the film, and Joule heat are employed to investigate effects of substrate and thermal properties on the intrinsic stability and quenching recovery. To consider the thermal boundary resistance between film and substrate, an interfacial-layer model (ILM) with very low diffusivity and an acoustic mismatch model (AMM) are employed. Results show that the thermal boundary resistance influences strongly the intrinsic stability. Thermal boundary resistance increases intrinsic stability if the thermal conductivity of the substrate or the disturbance energy is large. Higher Biot numbers and thermal conductivity ratios of film to substrate in longitudinal direction influence stability favorably. We demonstrate also that operation of a film/substrate system, such as YBCO/MgO, is either intrinsically stable or irrecoverably unstable.The authors wish to express their sincere appreciation to Dr. R. C. Chen for his invaluable advice and suggestions during the course of this paper. This research was supported by the National Science Council of the R. O. C. through grant NSC 83-0401-E-009-006. The computations were performed on the IBM ES/9000 at the National Center For High-Performance Computing.     

Search for new iron oxypnictide superconductors by using high-pressure synthesis technique

Here we report on the invention of the Co-doped induced superconductivity in PrFe_1−xCo_xAsO (x = 0 and 0.075). Polycrystalline samples were prepared by high-pressure synthesis method. The PrFe_1−xCo_xAsO (x = 0 and 0.075) crystallizes with the ZrCuSiAs type crystal structure (P4/nmm). The PrFeAsO is a parent compound with non-superconducting phase which can be transformed to superconductor by replacement 7.5% of Fe by Co. The magnetic susceptibility measurement shows the onset of superconducting transition temperature at 15 K.     

高温超导体的结构组装

 在总结铜氧化物高温超导体晶体结构特点的基础上，提出了以无限层结构Cu-O钙钛矿为核心的结构组装概念，通过和相关结构的外延组合，衍生出了高温超导体的主要晶体构型。进一步运用此观念，建立了新的三元数命名法，并对高温超导体的晶体结构进行了归类。     

Cu-系高温超导系列

 简要介绍了利用高温高压合成发现的超导系列CuBa₂Ca_n-1Cu_nO_2n+2+δ，即Cu-12n（三元数法）或Cu-12(n-1)n（四元数法），简称Cu-系。比较了Cu-系和其它主要高温超导体的结构和主要性质，指出了Cu-系和YBa₂Cu₃O₆的同构关系，以及Cu-系具有的良好的高温高场特性。Cu-系超导体因仅含碱土和铜的氧化物，化学组成简单、经济、安全，具有潜在的应用开发前景。     

FLUCTUATIONS OF FLUX LINES ON THE SURFACE OF SUPERCONDUCTOR

In this paper, we study the magnetic structure of the half-ring flux line ended on the surface of a superconductor. The elemental modes for these half-ring flux lines are the half-ellipse flux lines ended on and perpendicular to the surface. The statistics of these half-ring flux lines is, in a certain degree, similar to the vortex-antivortex pairs in thin superconducting films. An abrupt change of the thermodynamic properties for this system takes place at a temperature lower than T_c. It is analogous to the KT transition in thin superconducting films in certain sense.     

8T���߹��͸��³�������ĵ���Ż������

介绍了一种强磁场高温超导螺线管磁体电磁性能的优化方法。通过编写Matlab数据处理程序优化了一个中心磁感应强度为8T、内径为20cm的磁体。利用有限元分析法分析已优化磁体的磁场分布,得到磁体在垂直方向的最大磁感应强度值与Matlab数据处理程序计算的结果基本吻合。