Structure refinement and chemical analysis of Cs3Li(DSO4)4, formerly ‘Cs1.5Li1.5D(SO4)2’

An accurate structure refinement of the deuterated analog of the cesium lithium acid sulfate, formerly identified as ‘Cs_1.5Li_1.5H(SO₄)₂’, has been carried out using neutron diffraction methods. Like the protonated material reported earlier (Merinov et al., Solid State Ionics 69 (1994) 53), the compound is cubic, , however, the correct stoichiometry is Cs₃Li(DSO₄)₄. There are four formula units per unit cell and six atoms in the asymmetric unit. The lattice constant measured in this work is a=11.743(2) Å, comparable to the earlier results. The structure contains one disordered hydrogen bond, formed between O(2) atoms and located on two of the edges of the single LiO₄ tetrahedron. The Li site occupancy is , as is that of the deuterium site. This level of site occupancies is consistent with a structure in which hydrogen bonds are formed only when the lithium site is unoccupied, and explains the otherwise close proximity of the Li and D atoms, 1.394(10) Å. This unusual structural feature furthermore leads to a fixed stoichiometry, as confirmed here by chemical analysis of both the deuterated and protonated materials, despite the partial occupancy of the lithium and deuterium (hydrogen) atom sites.     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Microwave-assisted clean synthesis of 6-aryl-2,4-diamino-1,3,5-triazines in [bmim][PF6]

An efficient and green approach was developed to prepare 6-aryl-2,4-diamino-1,3,5-triazines from corresponding arylnitriles and dicyanodiamide in ionic liquid [bmim][PF₆] under computer-controlled microwave irradiation. Particularly valuable features of this method included the short reaction time, good yield, convenient operation and eco-friendly solvent.     

Lipase-catalyzed enantioselective reaction of amines with carboxylic acids under reduced pressure in non-solvent system and in ionic liquids

Lipase-catalyzed enantioselective acylation of 1-phenylethylamine and 2-phenyl-1-propylamine was performed by reacting the amines with carboxylic acids in a non-solvent system or in ionic liquids as reaction media. The reaction equilibrium was shifted toward amide synthesis by the removal of formed water under reduced pressure.     

DFT法研究离子液中EMIM+催化丁烯双键异构反应机理(II)

用密度泛函理论(DFT)在B3LYP/6-31G(d, p)的计算水平上研究了离子液中1-乙基-3-甲基咪唑阳离子(EMIM⁺)的4-H和5-H原子催化丁烯双键异构反应的可能途径，优化了反应体系的平衡态和过渡态的几何构型，分析了反应过程中键参数的变化，通过振动分析对平衡态和过渡态进行了验证. 计算结果表明, 离子液中的EMIM⁺首先通过4-H和5-H原子吸附丁烯, 进而催化丁烯的双键异构反应, EMIM⁺的4-H和5-H催化1-丁烯异构为2-丁烯的正反应活化能分别为204.2和207.3 kJ•mol^-1，逆反应活化能约为220.9和223.8 kJ•mol^-1， 反应为基元反应.     

THE CORRELATION EFFECT ON THE CHAIN MOTION CONTRIBUTION TO IONIC TRANSPORT IN POLYMER ELECTROLYTES

The ionic transport process in polymer electrolytes (such as polyethylene oxide) wassimulated numerically on a two dimensional square lattice where charge carriers areaccommodated by the lattice sites connected randomly with available bonds to represent theamorphous chain configuration. Following the dynamic bond percolation theory(DBPT),the chainmotion contribution to the ionic conduction was incorporated via periodical renewal of the randombond configuration. To check and extend the prediction made by DBPT employing global abruptbond renewal,spatial correlation of the bond reassignment was introduced to the system by: 1)regional bond renewal and 2) organized bond motion. It is found that the difference between thediffusivities simulated involving regional bond renewal and those of DBPT becomes negligiblewhen the bond renewal rate approaches the carrier hopping rate.     

Efficient and rapid synthesis of 1-substituted-1H-1,2,3,4-tetrazoles in the acidic ionic liquid 1-n-butylimidazolium tetrafluoroborate

An efficient synthesis leading directly to 1-substituted-1H-1,2,3,4-tetrazoles from easily available amines and sodium azide in stoichiometric proportions using a room-temperature ionic liquid, namely, 1-n-butylimidazolium tetrafluoroborate in excellent yields is described. The inherent Brønsted acidity and high polarity of the IL results in a significant enhancement in the reaction rate.     

ESR Studies on a Friedel‐Crafts Alkylation Reaction in [bmim]Cl‐AlCl3 Ionic Liquid

The paramagnetic complexes formed in Friedel‐Crafts alkylation reaction systems are invistigated by electron spin resonance (ESR) spectroscopy, in room temperature ionic liquids system 1‐butyl‐3‐methyl‐limidazolium chloride‐aluminium chloride ([bmim]Cl‐AlCl₃). The results indicate that ESR spectra observed are due to polycyclic aromatic radical cations formed from their parent hydrocarbons. ESR spectrum of spin adduct is obtained in an ionic liquid system composed of [bmim]Cl‐AlCl₃. In acidic solution the ¹⁴N hyperfine coupling constant of 4‐oxo‐TEMPO, 2.15 mT, is appreciably larger due to an adduct formed with AlCl₃.     

A simple adsorption model for ionic surfactants

In the past, few theoretical attempts have been made to describe quantitatively the adsorption of ionic surfactants at liquid interfaces. Well-known adsorption isotherms due to Frumkin or Hill–de Boer cannot respond to the specific electrostatic and geometric properties of the surfactant molecules. Our approach is based on a combination of the Gouy–Chapman theory with a modified Frumkin isotherm. The modification implies that the system is free to choose an optimal head group area and an optimal arrangement of the surfactant molecules in the interface as a function of bulk concentration. Interaction energies between neighbouring adsorbed surfactant molecules and between surfactant and water molecules are taken into consideration. The minimum of the Gibbs free energy of the system is equivalent to a minimal interfacial tension. Thus, the thermodynamically stable isotherm can be obtained as the lower envelope of the family of σ versus ln c isotherms resulting from different choices of the model parameters, including the area per molecule. According to the Gibbs equation, the Γ versus ln c adsorption isotherm is obtained as the derivative of this envelope. By variation of the model parameters, the envelope of the calculated adsorption isotherms can be fitted to experimental data of the interfacial tension versus bulk concentration. A computer program is used to calculate the σ versus c and the Γ versus ln c curves as well as to fit the parameters. Received: 28 October 1999/Accepted: 8 February 2000     

Synthesis, characterization and thermal properties of new aromatic quaternary ammonium bromides: precursors for ionic liquids and complexation studies

Series of new aromatic R₂R′₂N⁺Br⁻ (R=benzyl, 4-methylbenzyl, 2-phenylethyl, 3-phenylpropyl; R′=ethyl, methyl, isopropyl) or RR′₂NH⁺Br⁻-type (R=benzyl, R′=isopropyl) quaternary ammonium bromides were prepared by using novel synthetic route in which a formamide (N,N-diethylformamide, N,N-dimethylformamide, N,N-diisopropylformamide) is treated with aralkyl halide in presence of a weak base. The compounds were characterized by ¹H-NMR and ¹³C-NMR spectroscopy and mass spectrometry. Structures of the crystalline compounds were determined by X-ray single crystal diffraction, and in addition the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. Three of the compounds crystallized in monoclinic, two in orthorhombic and one in triclinic crystal system, showing ion pairs, which are interconnected by weak hydrogen bonds and weak π-π interactions between the phenyl rings. Three of the compounds appeared as viscous oil or waxes. Finally, TG/DTA and DSC methods were used to analyze thermal properties of the prepared compounds. The lowest melting points were obtained for diethyldi-(2-phenylethyl)ammonium bromide (122.2 °C) and for diethyldi-(3-phenylpropyl)-ammonium bromide (109.1 °C). In general, decomposition of the compounds started at 170-190 °C without identifiable cleavages, thus liquid ranges of 30-70 °C were observed for some of the compounds.