BaY2F8晶体生长基元与结晶机理的探讨

本文通过对BaY2F8晶体结构的分析,从晶体的生长基元为负离子配位多面体理论出发,对自然冷却条件下BaY2F8晶体自发结晶习性进行了研究,提出了以Ba2+为中心的近八配位十二面体和以Y3+为中心的近八配位十二面体是晶体生长的基元.并根据自发结晶的BaY2F8的XRD,说明了BaY2F8晶体的{200}、{130}、{021}、{330}、{-111}、{111}、{221}、{002}等面族比较发育的原因.本文证实了仲维卓的负离子配位多面体理论对BaY2F8晶体生长的适用性,并对探索新的BaY2F8单晶生长方法有参考作用.     

Stationary states of crystal growth in three dimensions

A new Markov process describing crystal growth in three dimensions is introduced. States of the process are configurations of the crystal surface, which has a terrace-edge-kink structure. The states are continuous along edges but discrete across edges, in accordance with the very different rates for the two types of captures of particles. Stationary distributions, describing steady crystal growth, are found in general. To our knowledge, these are the first examples of stationary distributions for layered crystal growth in three dimensions. The steady growth rate and other quantities are obtained explicitly for two interacting edges. For many interacting edges, growth behavior is determined (a) in various asymptotic regimes including thermodynamic limits, (b) via simulations, and (c) using series (cluster) expansions in the slope of the surface, the first three coefficients being computed. The theoretical growth rates show a marked dependence on surface dimensions. This may contribute to the size dependence and dispersion in the observed growth rate of small crystals.     

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

Field Study on Mobility and Persistence of Linuron and Monolinuron in Agricultural Soil

Abstract

A field site equipped with suction cup lysimeters was installed at Treviglio (BG) to assess the migration capacity of the herbicides linuron and monolinuron from topsoil to groundwater and to verify the appearance of their relevant transformation products in soil and water samples. A constant hydraulic head was applied in order to develop water saturation conditions in the upper layers. KCl was used as a tracer to evaluate water infiltration velocity through the vertical soil profile. The constant hydraulic head accelerated infiltration rates, while herbicide concentrations reached maximum contamination because soil adsorption capacity was underdeveloped. The results indicated two main processes of pesticide transport: firstly transport due mainly to water infiltration through macropores; secondly the transport driven by matrix flow. Linuron was found to be the most mobile herbicide, while chloroanilines were found to be the major transformation products of the herbicides considered.     

Swelling of metallic surfaces irradiated by helium ions

At doses close to threshold for exfoliation or bubble formation the surfaces have been investigated by SEM and, after isolation of surface layers, also by RBS. Swelling as a function of energy and material has been determined. The data are interpreted in the form of volume occupied by a helium atom. We find an indication for a volume decrease with increasing energy. A special example of blister formation is also discussed, where we find evidence for a non-uniform fracture plane.     

Analysis of Malathion and its Breakdown Products in Aquaria Containing Golden Shiners (N. CHRYSOLEUCAS)

Abstract

The 1-ethylmonocarboxylic acid of Malathion (MCA) was identified as a metabolite of Malathion in the gut of golden shiners (N. Chrysoleucas) (7.11 × 10²±0.66 × 10² ng/g tissue). As noted in the literature the rate of hydrolysis of Malathion above pH 7 is first order with respect to Malathion and pH dependent. In addition, the rate of hydrolysis of Malathion in aquaria housing these fish was found to be dependent on the concentration of Ca⁺²; sparging the aquaria with air affected the rate. Some of the hydrolysis products of Malathion were identified by gc/ms and found to be pH dependent above pH 7. The half-life of Malathion under different conditions, the identification of some hydrolytic products and a general scheme for the analysis of Malathion, along with some of its metabolic and hydrolytic products are included in this paper.     

Living fluids

One of the major emerging fields of research of the beginning of this century concerns living fluids. By “living fluids”, we mean two major categories of complex fluids: (i) fluids which are essential to life, like blood, and (ii) active fluids made of particles that are able to propel themselves in the suspending fluid by converting a form of their energy into mechanical motion. Studies on active fluids have known a considerable interest since the last decade. Blood might be viewed as an old topic, but the progresses in experimental techniques, analytical concepts and numerics, have contributed nowadays to a dramatic renewal of the interest in this field, with a great potential towards understanding physical and mechanical factors in cardiovascular diseases. These fields have considerably strengthened interdisciplinary research. The series of reviews of this dossier focus on the tremendous recent progress achieved in research on living fluids both from the experimental and theoretical points of views. These reviews present also the major open issues, making of this dossier a unique guide for future research in these fields. This project grew up thanks to the international summer school that we organized on the topic “living fluids” at the IES (Institut dʼétudes scientifiques) of Cargèse (Corsica) in 2012.     

A Split-Flow Enzyme Thermistor

Abstract

The split-flow system is comprised of two identical micro-columns, one of which contains an immobilized enzyme preparation, the other an inert support material.

The heat produced in each column on introduction of a sample is measured with thermistors placed in these columns. The use of a reference column virtually eliminates the influence on the measurements of artifactual signals as unspecific heat, i.e., heat not produced by the enzymic reaction. The performance of the split-flow enzyme thermistor at a variety of pH's, ionic strengths or viscosities associated with the sample has been investigated and compared with previously described alternative enzyme thermistor arrangements. In this comparative study glucose at a concentration of 5 · 10^?4 M was used throughout. On passage through the imnobilized glucose oxidase preparation this solution gave rise to a heat change At of about 0.01°C. The insensitivity of the system described herein towards such variations makes it particularly suitable for the analysis of metabolities present in crude solutions such as urine and skim-milk.     

Surface tension and viscosity measurements of liquids with the survismeter: a single instrumental unit

Surface tension (γ) and viscosity (η) data of aqueous solutions of the deoxyadenosine (DOA) and the deoxyribose (DOR) sugars have been measured with the survismeter, a new instrument, along with tetrahydrofuran (THF), dimethylformamide (DMF), acetonitrile and dimethylsulphoxide (DMSO) solvents. The same properties have also been measured with a stalagmometer and a viscosimeter, respectively, which afford the same information, albeit at the expense of a larger amount of chemicals and solvents. We obtain comparatively better accuracy in both kinds of measurements than with conventional methods. Therefore, the survismeter lends itself as a simple and reliable instrument.