聚合物复合材料填充剂的表面性质及其分散性的研究

本文通过反气相色谱技术研究了未处理的、硅烷偶联剂处理的和钛酸酯偶联剂处理的三种Al(OH)_3粉末的表面性质,并通过塑化仪和扫描电子显微镜研究了Al(OH)_3填充聚丙烯体系的流变行为及其在聚丙烯中的分散效果.结果表明Al(OH)_3的表面性质对其在聚丙烯介质中的分散效果有着重要的影响.     

Filtering germs: Groupoids associated to inverse semigroups

We investigate various groupoids associated to an arbitrary inverse semigroup with zero. We show that the groupoid of filters with respect to the natural partial order is isomorphic to the groupoid of germs arising from the standard action of the inverse semigroup on the space of idempotent filters. We also investigate the restriction of this isomorphism to the groupoid of tight filters and to the groupoid of ultrafilters.     

Comparison between the adsorption behaviors of an organic cation and an organic anion on several reversed-phase liquid chromatography adsorbents

Adsorption data of an organic cation (propranololium chloride) and an organic anion (sodium 1-naphthalene sulfonate) were measured by frontal analysis on two RPLC adsorbents, Symmetry-C18 and XTerra-C18, with aqueous solutions of methanol as the mobile phases. The influence of supporting neutral salts on the adsorption behavior of these two ions are compared. The Henry constants are close (H approximately 5). The four sets of isotherm data are all well accounted for using the bi-Moreau model. However, the isotherms of the two ions behave differently at high concentrations. The initial behaviors of all the isotherms are antilangmuirian but remain so in a much wider concentration range for the cation than for the anion, due to its stronger adsorbate-adsorbate interactions on the low-energy adsorption sites. The retention times of both ions increase with increasing concentration of neutral salt in the mobile phase, suggesting the formation of ion-pair complexes, with Cl- for the cation and with Na+ for the anion. The adsorbate-adsorbate interactions vanish in the presence of salt and the bi-Moreau isotherm model tends toward a bi-Langmuir model. Differences in adsorption behavior are also observed between the cation and the anion when bivalent inorganic anions and cations, respectively, are dissolved in the mobile phase. High concentration band profiles of 1-naphthalene sulfonic acid are langmuirian, except in the presence of a trivalent cation, while those of propranolol are antilangmuirian under certain conditions even with uni- or divalent cations.     

A further breakthrough in biphasic, rhodium-catalyzed hydroformylation: the use of Per(2,6-di-O-methyl)-β-cyclodextrin as inverse phase transfer catalyst

Solvent free biphasic hydroformylalion of various water-insoluble terminal olefins can be achieved in high yields and sclcctivitics by using a water-soluble rhodium/triphenylphosphine trisulfonate catalyst and per(2,6-di-o-mclhyl)-β-cyclodcxtrin as inverse phase transfer catalyst. The catalytic activities were up to ten times higher than those observed without pcr(2,6-di-o-methyl)-β-cyclodextrin.     

Comparison between adsorption isotherm determination techniques and overloaded band profiles on four batches of monolithic columns

The adsorption isotherms of 4-tert.-butyl phenol were measured on four different monolithic columns, using three different techniques, classical frontal analysis (FA), the perturbation on a plateau method (PP) and the recently introduced numerical procedure known as the inverse numerical method (IN). This last approach requires only the recording of a few overloaded profiles and has the potential advantage of affording a dramatic decrease of the amounts of compounds, solvent, and time needed to determine accurate estimates of the coefficients of the isotherm. The reproducibility of the adsorption data measured on the four columns is discussed with reference to the specific techniques used for obtaining these data and to the most suitable equation used for modeling them. The data obtained for the different columns were highly consistent. The inverse numerical approach was confirmed to provide a powerful, accurate, and economic method for measuring single component adsorption data.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Cyclodextrins as chiral stationary phases in capillary gas chromatography. Part VII: Cyclodextrins with an inverse substitution pattern – synthesis and enantioselectivity

Transferring the site of specific substitution of dipentylated cyclodextrins with methyl or acyl residues from the secondary 3-hydroxyl group to the primary 6-hydroxyl group was expected to provide new information on the mechanism of chiral recognition. The 3-position points towards and the 6-position points away from the cyclodextrin cavity which via inclusion complex formation is supposed to play a major role in chiral separation. The “inverse” 6-O-acyl-2,3-di-O-pentyl-cyclodextrins displayed almost no enantioselectivity but the corresponding 6-O-methyl derivatives are a versatile supplement to the chiral capillary GC phases nowadays available. Among the compounds that could be enantiomerically resolved are alcohols, amino acids, alkyl halides, bicyclic ethers, acetals, olefins, other hydrocarbons and chiral pharmaceuticals.     

Neue Kupferkomplexe mit Phosphaalkenliganden. Molekülstruktur von [Cu{P(Mes*)C(NMe2)2}2]BF4 (Mes* = 2,4,6‐tBu3C6H2)

New Copper Complexes Containing Phosphaalkene Ligands. Molecular Structure of [Cu{P(Mes*)C(NMe₂)₂}₂]BF₄ (Mes* = 2,4,6‐tBu₃C₆H₂) Reaction of equimolar amounts of the inversely polarized phosphaalkene tBuP=C(NMe₂)₂ ( 1a ) and copper(I) bromide or copper(I) iodide, respectively, affords complexes [Cu₃X₃{μ‐P(tBu)C(NMe₂)₂}₃] ( 2 ) (X =Br) and ( 3 ) (X = I) as the formal result of the cyclotrimerization of a 1:1‐adduct. Treatment of 1a with [Cu(L)Cl] (L = PiPr₃; SbiPr₃) leads to the formation of compounds [CuCl(L){P(tBu)C(NMe₂)₂}] ( 4a ) (L = PiPr₃) and ( 4b ) (L = SbiPr₃), respectively. Reaction of [(MeCN)₄Cu]BF₄ with two equivalents of PhP=C(NMe₂)₂ ( 1b ) yields complex [Cu{P(Ph)C(NMe₂)₂}₂]BF₄ ( 5b ). Similarly, compounds [Cu{P(Aryl)C(NMe₂)₂}₂]BF₄ ( 5c (Aryl = Mes and 5d (Aryl = Mes*)) are obtained from ArylP=C(NMe₂)₂ ( 1c : Aryl = Mes; 1d : Mes*) and [(MeCN)₄Cu]BF₄ in the presence of SbiPr₃. Complexes 2 , 3 , 4a , 4b , and 5b‐5d are characterized by means of elemental analyses and spectroscopy (¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR). The molecular structure of 5d is determined by X‐ray diffraction analysis.     

Study of modified silicas by inverse gas chromatography. Part I: Influence of chain length on grafting ratio

Summary Silica has been modified by an esterification reaction using either n-alcohols or - diols. The grafting ratios were evaluated by elemental analysis of carbon or by the weight loss of the grafted silica heated to 700°C. The grafting ratio can be easily fixed by changing the silica to reactant impregnation ratios. In the case of n-alcohols, the grafting ratios do not vary monotonously with the number of carbon atoms of the grafts and the density of the grafted layer is 25% higher for - diols than for n-alcohols. This observation needs further investigation.     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.