Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

The Degree of Disorder in Hardwood Kraft Pulps Studied by Means of LODP

The amount of disordered material in two types of hardwood kraft pulps was estimated by determining the weight loss at the point where the levelling-off degree of polymerisation (LODP) was reached. The pulps used were commercial pulps viz (1)one conventional birch kraft and (2)one mixed hardwood (MHW) kraft pulp that had been prehydrolysed prior to cooking. The results indicated that the hemicellulose xylan is closely associated with the cellulose in commercial birch pulps. It is therefore only possible to use LODP as a measure of the crystallite length of hardwood cellulose in highly purified pulps, such as prehydrolysed kraft pulp. A model explaining the LODP-results is proposed.     

The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems

The Cox-Merz empirical relationship between the linear (oscillatory) and nonlinear (steady-state) viscosities has been shown to be valid for many polymeric systems. Here, we present an equivalent expression to relate the linear (G) and nonlinear (N ₁) elastic properties of viscoelastic systems. Like the Cox-Merz relationship, it uses a combination of elastic and viscous parameters. The modified form of the storage modulus is then equivalent to the Cox-Merz complex viscosity. It can be used to correlate with (half) the normal force at numerically equal circular frequency and shear rate, respectively.This new expression and the Cox-Merz rule are tested for a range of polymeric and colloidal systems. It is found that both expression work for the polymeric systems considered, but fail for the colloidal systems. In the latter, the steady state values of viscosity and elasticity are consistently low, and replacing them by the complex viscosity and our new elastic expression only makes matters worse.For polymer systems, we suggest this is a general but not universal observation, since we are aware of exceptions to the rule that polymeric systems obey the Cox-Merz rule for viscosity and our rule for elasticity. For colloidal systems we find that neither rule is obeyed for any of our systems.     

H2 + CN(n=0,1)→H + HCN振动选态反应

用从头算方法获得了Ｈ２＋ＣＮ反应的内禀反应坐标（ＩＲＣ），沿着ＩＲＣ，计算了各垂直于ＩＲＣ的简正模所对应的频率（Ｗ）以及沿ＩＲＣ运动与垂直ＩＲＣ运动的简正模之间的耦合常数（ＢＫＦ），根据传统过渡态，变分过渡态理论和选态公式，计算了ｎＣＮ＝０及ｎＣＮ＝１时反应的速率常数，并得到了实验相一致的结果，还计算了ｎＣＨ＝１及ｎＣＮ＝１的Ｈ＋ＨＣＮ→Ｈ２＋ＣＮ反应速率常数，可供实验工作者参考。     

Stannous oxalate as a novel catalyst for the synthesis of polytrimethylene terephthalate

Stannous oxalate was prepared efficiently and characterized by XRD and FT-IR. It exhibited higher catalytic activity and had profitable effect than tetrabutyl titanate and stannous octoate for the synthesis of polytrimethylene terephthalate (PTT) via esterification-route. Over this catalyst, the degree of esterification of pure terephthalic acid was up to 94.4% at 260°C after 1.5 h, while the intrinsic viscosity and content of terminal carboxyl groups of the corresponding PTT polyester, polymerized at 260°C, 60 Pa for 2 h, was 0.8950 dL/g and 15 mol/t, respectively. Stannous oxalate was a promising catalyst for the synthesis of PTT polyester.     

Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity

Solubility parameter and Flory Huggins interaction parameter of a triblock SBES have been obtained from intrinsic viscosity measurements. The solubility of the block copolymer in all solvents (methyl-cyclohexane, cyclohexane, cyclopentane, toluene and benzene) was found good except in the case of n-hexane. The results obtained are similar to other found in literature for SBR and SBS rubbers, and indicate that cyclohexane and cyclopentane and methylcyclohexane are the most compatible solvents for this kind of polymer.     

Quantitative evaluation of stress distribution in bulk polymer samples through the comparison of mechanical behaviors between giant single‐crystal and semicrystalline samples of poly(trans‐1,4‐diethyl muconate)

The Raman shift and crystallite modulus were measured under the application of tensile force for a giant single crystal and a series of uniaxially oriented semicrystalline samples of poly(trans‐1,4‐diethyl muconate) (polyEMU). The apparent Raman shift factor α^app or a vibrational frequency shift per 1 GPa tensile stress was higher for the semicrystalline samples with lower crystallinity or lower bulk modulus. The apparent crystallite modulus E or Young's modulus along the chain axis in the crystalline region was not constant but varied remarkably between the giant single crystal and semicrystalline samples. A systematic change in α^app and E among the polyEMU samples with different preparation history could be interpreted quantitatively on the basis of a mechanical series parallel model consisting of crystalline and amorphous phases. The origin of different E and α^app was speculated to be a stress concentration on the taut‐tie chain contained as a parallel crystalline component in the mechanical model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 444–453, 2003     

Investigation of Cd(II), Pb(II) and Cu(I) complexation by glutathione and its component amino acids by ESI-MS and size exclusion chromatography coupled to ICP-MS and ESI-MS

The elucidation of structures of glutathione (GSH) complexes play an important role in the fundamental understanding of biochemical pathways of metal ion deactivation in plants. This article attempts to feature key studies for stoichiometry of metal complexes with glutathione and its constituent amino acids to obtain a better understanding of the different metal affinities of the complexation sites of glutathione. The SEC-ICP-MS experiments have indicated that oxidation process of glutathione was accelerated by metal ion presence in following order Cu⁺, Pb²⁺ and Cd²⁺. The redox activity of metal ions was confirmed by ESI-MS experiments, which allowed to observe formation of glutathione disulphide (GSSG) in time. The stoichiometry of Cd²⁺, Cu⁺ and Pb²⁺ complexes with GSH was defined by observing the isotope pattern of investigated metals and hydrogen loss or transfer during binding. The complexes with metal bound to sulphur of 1:1 and 1:2 stoichiometry were found in case of cadmium and lead. The number of hydrogen atoms lost during metal binding and the SEC-ESI-MS results allowed to elucidate that copper is bound by GSSG in ratio 1:1 and 1:2. Additionally, size exclusion chromatography coupled to electrospray MS allowed to differentiate more stable complexes from weak ones that could be created in the gas phase.     

The effects of alternative stress on the cell membrane deformability of chrysanthemum callus cells

The effects of alternative stress, which was generated through a strong sound field apparatus set up in our lab, on cultured chrysanthemum callus cells were studied. Meanwhile we measured the deformability of chrysanthemum cell membranes and studied the influence of the cytoskeleton after the treatment of colchicine using micropipette aspiration technique. Based on our experimental results, we found that the deformability of cell membrane decreased in stress condition. However, the effect disappeared after the treatment of cytochalasin. Therefore, we thought that the reason on the deformability of cells decreasing was the microfilament rearranging and consequently the cells becoming more rigid under the alternative stress.     

Thermodynamic issues associated with combined cyclic voltammetry and wafer curvature measurements in electrolytes

A thermodynamic framework has been provided for the interpretation of combined cyclic voltammetry and surface stress measurements, the latter being obtained from wafer curvature or beam deflection measurements of a solid electrode as a function of applied potential (so-called voltstressograms). Firstly, the derivation of electrocapillarity equations for solid electrodes has been critically reviewed by starting from the Gibbs adsorption equation appropriate for solid–electrolyte interfaces. This allowed us to demonstrate the critical importance of elastic surface strain in the thermodynamic boundary conditions of the partial derivatives intervening in the interpretation of voltstressograms. From these considerations, it was shown for the first time that the electrocapillarity equations for solid electrodes are not appropriate for describing the variation of surface stress with potential obtained from wafer curvature measurements, because such measurements are intrinsically incompatible with the constant strain condition implied in the electrocapillarity equations. An alternative explanation is provided for the experimentally observed proportionality between the current density, measured in cyclic voltammograms, and the first derivative of surface stress with respect to potential, obtained from voltstressograms.