关于我国2010年人口普查事后质量检查样本量测算的建议

同以往历次进行的人口普查一样,我国在2010年第六次人口普查后也将进行事后质量检查。样本量估计是抽取事后质量检查样本之前必须要做的一项工作。本人建议,用2000年人口普查事后质量检查样本资料估计其抽样方案的设计效应,然后用这个设计效应估计2010年在既定精度要求下所需要的样本量。     

浅谈GPS技术与高等级公路测量

全球定位系统为公路勘测设计工作者提供了一个可靠的提高外业测量精度及进度的工具,随着GPS越来越多地出现在人们的生产、生活中,这一先进的测量手段会被更广泛地应用到公路勘测工作中,从而可提高作业效率,缩短设计周期,推动交通事业的发展和公路的建设。     

PARTICIPATION IN INTERNATIONAL ENVIRONMENTAL AGREEMENTS: THE ROLE OF TIMING AND REGULATION

ABSTRACT. We analyze the formation of self‐enforcing international environmental agreements under the assumption that countries announce their participation either simultaneously or sequentially. It is shown that a sequential formation process opens up possibilities for strategic behavior of countries that may lead to inferior outcomes in terms of global abatement and welfare. We then analyze whether and under which conditions a regulator like an international organization, even without enforcement power, can improve upon globally suboptimal outcomes through coordination and moderation, given that recommendations must be Pareto‐improving to all parties.     

Development of standards for reliable surface analyses by ISO technical committee 201 on surface chemical analysis

The need for reliable surface analyses together with quality‐management requirements for analytical laboratories led the International Organization for Standardization (ISO) to form its Technical Committee (TC) 201 on Surface Chemical Analysis in 1991. This article describes the organization of TC 201, the strategies that have been found useful for identifying and assessing possible projects for new international standards, and the 57 international standards and other documents prepared to date by TC 201. Standards have now been developed for Auger‐electron spectroscopy, glow‐discharge spectroscopy, various types of scanning probe microscopy, secondary‐ion mass spectrometry, sputter‐depth profiling, total‐reflection X‐ray fluorescence spectroscopy, X‐ray photoelectron spectroscopy, and X‐ray reflectometry. In addition, standards have been developed with definitions of terms used in surface chemical analysis; the handling, preparation of specimens for surface analysis; information and data‐transfer formats; and methods for determining the lateral resolution of beam‐based methods of surface analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

Improved operator comfort and off-road capability through pendulum arm technology

The Nordic forest industry requires just-in-time wood deliveries. Operations must continue regardless of season, weather and terrain. Soil compaction and deep ruts must be avoided while providing high performance and a reasonable working environment for operators.The Xt28 pendulum arm forwarder is a full-size concept forwarder with six hydrostatic propelled wheels on pendulum arms built on a three-piece frame connected with two articulation joints. The Xt28 concept machine was tested according to Skogforsk standard machine tests. Rut depth test focused on soil interaction where rut depth was measured related to number of passes. Machine dynamics were measured using standardized test track with focus on operator comfort.The project proved the potential of pendulum arm technology in off-road transportation. Automatic pendulum arm levelling, equalized ground pressure between wheels and improved operator comfort through reducing adverse vibrations and roll angles, simultaneously reducing dynamic forces transferred to the forest floor. Pendulum arm technology improves travel speed in adverse terrain, providing unparalleled side slope capability and enhanced productivity.     

IMEP-24 analysis of eight trace elements in toys

The International Measurement Evaluation Program (IMEP) organised the IMEP-24 interlaboratory comparison after reports in the media about high levels of lead in toys. The aim of this comparison was to verify the laboratories’ capacity to evaluate trace-element levels in a possible toy-like material according to the European Standard EN 71-3:1994. As test material, it used a former certified reference material containing levels of antimony, arsenic, barium, cadmium, chromium, mercury, lead and selenium around the limits set in the standard.Four expert laboratories confirmed the reference values (Xref) for all elements but Hg, and established a reference value for Hg. The scatter of the results reported by the participants was large, as expected, but showed a close to normal distribution around the reference values for five of the eight trace elements. The spread of results was mainly attributed to sampling and sample preparation.One major issue observed in this exercise was the lack of legislative rules about how to report the result, or, more specifically, the use of the analytical correction, which was introduced in EN 71-3:1994 to achieve consistent interpretation of results and which is to be applied when values are equal to or above the maximum limits set in the standard. Its application by the participants was very inconsistent and led to problems in their evaluation. There is clearly a need for clarification and for more formal regulations with regard to result reporting in order to minimise the risk of confusion.Participants were also asked to give their opinion with regard to the acceptability of the test material for the market. The majority correctly considered the material as non-compliant. However, almost one-third incorrectly assessed the material as compliant.     

IMEP-24 analysis of eight trace elements in toys

The International Measurement Evaluation Program (IMEP) organized the IMEP-24 interlaboratory comparison after reports in the media about high levels of lead in toys. The aim of this comparison was to verify the laboratories’ capacity to evaluate trace-element levels in a possible toy-like material according to the European Standard EN 71-3:1994. As test material, it used a former certified reference material containing levels of antimony, arsenic, barium, cadmium, chromium, mercury, lead and selenium around the limits set in the standard.Four expert laboratories confirmed the reference values (Xref) for all elements but Hg, and established a reference value for Hg. The scatter of the results reported by the participants was large, as expected, but showed a close to normal distribution around the reference values for five of the eight trace elements. The spread of results was mainly attributed to sampling and sample preparation.One major issue observed in this exercise was the lack of legislative rules about how to report the result, or, more specifically, the use of the analytical correction, which was introduced in EN 71-3:1994 to achieve consistent interpretation of results and which is to be applied when values are equal to or above the maximum limits set in the standard. Its application by the participants was very inconsistent and led to problems in their evaluation. There is clearly a need for clarification and for more formal regulations with regard to result reporting in order to minimize the risk of confusion.Participants were also asked to give their opinion with regard to the acceptability of the test material for the market. The majority correctly considered the material as non-compliant. However, almost one-third incorrectly assessed the material as compliant.     

Parallel local search

We present a survey of parallel local search algorithms in which we review the concepts that can be used to incorporate parallelism into local search. For this purpose we distinguish between single-walk and multiple-walk parallel local search and between asynchronous and synchronous parallelism. Within the class of single-walk algorithms we differentiate between multiple-step and single-step parallelism. To describe parallel local search we introduce the concepts of hyper neighborhood structures and distributed neighborhood structures. Furthermore, we present templates that capture most of the parallel local search algorithms proposed in the literature. Finally, we discuss some complexity issues related to parallel local search.     

抽样调查的设计与分析(Ⅰ)

本文讨论抽样调查实践中有关设计和数据分析的若干问题．第一部分主要涉及设计问题．