不同年龄段天然牙的摩擦磨损行为研究

采用往复滑动摩擦磨损试验台考察了不同年龄段的天然牙同钛合金配副时的摩擦学性能.结果表明:天然牙的摩擦磨损行为同年龄密切相关,早期和中期恒牙的摩擦磨损行为相似,磨损表面主要呈现轻微擦伤迹象,中期恒牙的抗磨性能最佳;乳牙及晚期恒牙的摩擦系数变化波动较大,抗磨性能不佳,磨损表面主要呈现严重犁削和剥落特征.     

Mass and momentum conservation of the least-squares spectral collocation method for the Navier-Stokes equations

From the literature, it is known that the Least-Squares Spectral Element Method (LSSEM) for the stationary Stokes equations performs poorly with respect to mass conservation but compensates this lack by a superior conservation of momentum. Furthermore, it is known that the Least-Squares Spectral Collocation Method (LSSCM) leads to superior conservation of mass and momentum for the stationary Stokes equations. In the present paper, we consider mass and momentum conservation of the LSSCM for time-dependent Stokes and Navier-Stokes equations. We observe that the LSSCM leads to improved conservation of mass (and momentum) for these problems. Furthermore, the LSSCM leads to the well-known time-dependent profiles for the velocity and the pressure profiles. To obtain these results, we use only a few elements, each with high polynomial degree, avoid normal equations for solving the overdetermined linear systems of equations and introduce the Clenshaw-Curtis quadrature rule for imposing the average pressure to be zero. Furthermore, we combined the transformation of Gordon and Hall (transfinite mapping) with the least-squares spectral collocation scheme to discretize the internal flow problems.     

Effects of annealing and additions on dynamic mechanical properties of SnSb quenched alloy

The elastic modulus, internal friction and stiffness values of quenched SnSb bearing alloy have been evaluated using the dynamic resonance technique. Annealing for 2 and 4 h at 120, 140 and 160 °C caused variations in the elastic modulus, internal friction and stiffness values. This is due to structural changes in the SnSb matrix during isothermal annealing such as coarsening in the phases (Sn, Sb or intermetallic compounds), recrystallization and stress relief. In addition, adding a small amount (1 wt.%) of Cu or Ag improved the bearing mechanical properties of the SnSb bearing alloy. The SnSbCu₁ alloy has the best bearing mechanical properties with thermo-mechanical stability for long time at high temperature.     

Internal rotation and chlorine nuclear quadrupole coupling of o-chlorotoluene studied by microwave spectroscopy and ab initio calculations

The microwave spectrum of o-chlorotoluene has been reinvestigated using molecular beam Fourier transform microwave (MB-FTMW) spectrometers in the frequency range of 4–23 GHz. Due to the high resolution of this molecular beam technique the analysis yielded improved rotational constants, centrifugal distortion constants, and, for the first time, the complete chlorine nuclear quadrupole coupling tensor. From the torsional fine structure the barrier to internal rotation of the methyl group was found to be 5.5798(52) kJ mol⁻¹. Experimental results and ab initio calculations are compared.     

Application of ultra-high-pressure liquid chromatography–tandem mass spectrometry to the determination of multi-class pesticides in environmental and wastewater samples: Study of matrix effects

An ultra-high-pressure liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method for the determination of 37 pesticides (herbicides, insecticides and fungicides) in environmental and wastewater has been developed. To efficiently combine UHPLC with MS/MS, a fast-acquisition triple quadrupole mass analyzer was used. This analyzer (minimum dwell time, 5 ms) allows acquiring up to three simultaneous transitions in the selected reaction monitoring mode for each compound assuring a reliable identification without resolution or sensitivity losses. A pre-concentration step based on solid-phase extraction using Waters Oasis HLB cartridges (0.2 g) was applied with a 100-fold pre-concentration factor along the whole analytical procedure. The method was validated based on European SANCO guidelines using surface, ground, drinking and treated water (from an urban solid residues treatment plant) spiked at two concentration levels (0.025 and 0.1 μg/L), the lowest having been established as the limit of quantification objective. The method showed excellent sensitivity, with instrumental limits of detection ranging from 0.1 to 7 pg. It was applied to environmental water samples (ground and surface water) as well as to samples of urban solid waste leachates (raw leachate and treated leachate after applying reversed osmosis) collected from a municipal treatment plant. Matrix effects have been studied in the different types of water samples analyzed, and several isotope-labelled internal standards have been evaluated as a way to compensate the signal suppression observed for most of the compounds studied, especially in wastewater samples. As a general remark, only those pesticides which response was corrected using their own isotope-labelled molecule, could be satisfactorily corrected in all type of samples, assuring in this way the accurate quantification in all matrix samples.     

Microelectrochemical investigation on aluminium–steel friction welds

Aluminium–steel friction welds (AlMgSi0.5/C35 and AlMgSi0.5/X5CrNi18‐10) were electrochemically investigated in a NaAc/HAc buffer (pH 5.9) and 0.1 mol/l NaCl using the microcapillary technique. This technique allows a lateral resolution of electrochemical measurements. However, microscopic investigations and scanning electron microscopy/energy dispersive X‐ray SEM/EDX measurements show that the reaction zone (RZ) and the heat affected zone (HAZ) of the welds are smaller than the microcapillary diameter. This paper discusses the advantages and limitations of the microcapillary technique in view of friction welds. Nevertheless, the electrochemical experiments allow a clear detection of the changing active surface area and the correlation to the microstructure (intermetallics). The application of microcapillary measurements on samples which were exposed in marine climate for 2 years shows a good correlation between the local potential measurements and the local corrosion phenomena. Copyright © 2010 John Wiley & Sons, Ltd.     

正交各向异性摩擦接触分析的一个二阶锥线性互补法

建立了用于各向异性摩擦接触分析的一个新型互补模型:二阶锥线性互补模型.通过与弹翅性力学的类比,并引入线性二阶锥互补的概念,将正交各向异性摩擦接触定律表达为一个二阶锥线性互补模型.在此基础上,在参变量变分原理的框架下,建立了正交各向异性摩擦接触问题的有限元列式.由于避免了对摩擦锥的显式线性化,使得该文模型的变量个数较线性互补模型小很多,而解的精度又高很多.文末通过算例,说明了方法对于正交各向异性摩擦接触分析的有效性.     

聚3-己基噻吩：非富勒烯太阳能电池中的量子效率损失和电压损失

聚3-己基噻吩(P3HT)以其合成工艺简单、成本低廉的优势,成为有机光伏领域中最具吸引力的电子给体材料之一。然而,目前P3HT: 非富勒烯太阳能电池的光伏性能仍然较差。在本工作中,我们证明了与P3HT: 富勒烯太阳能电池相比,较快的电荷转移态的非辐射衰减速率(K_nr)是导致P3HT: 非富勒烯太阳能电池中较低的量子效率和较高的电压损失的原因。然后,我们研究了基于非富勒烯受体ZY-4Cl的太阳能电池的工作机理。研究结果表明与P3HT: 非富勒烯体系相比,P3HT: ZY-4Cl中K_nr的降低改善了器件的量子效率,同时降低了电压损失。K_nr降低的原因可以部分归因于电荷转移态能量的增加。此外,给体分子和受体分子之间的距离(DA间距)的增大也是K_nr减少的重要原因。因此,我们得出结论：为了提高P3HT太阳能电池的性能,需进一步降低器件的K_nr,这可通过增加活性层中的DA间距来实现。