大面积金纳米线光栅的制备

利用激光干涉光刻和金纳米颗粒胶体溶液制备了宽度在100 nm以下且总面积达到平方厘米量级的金纳米线光栅结构.制备过程中,首先在表面镀有厚度约为200 nm的铟锡氧化物薄膜的面积为1 cm×1 cm的玻璃基片表面旋涂光刻胶,然后利用紫外激光干涉光刻制备光刻胶纳米光栅结构.有效控制干涉光刻过程中的曝光量、显影时间,获得小占空比的光刻胶光栅.再以光刻胶纳米光栅作为模板,旋涂金纳米颗粒胶体溶液.充分利用金纳米颗粒胶体溶液在光刻胶表面浸润性差的特点,限制旋涂后留存在光刻胶光栅槽中金纳米颗粒的数量,从而达到限制金纳米线宽度的目的.最后在250℃将样品进行退火处理5 min.获得了周期为400 nm且占空比小于1:4的金纳米线光栅结构,其有效面积为1 cm².以波导共振模式与粒子等离子共振模式间耦合作用为特征的光谱学响应特性验证了波导耦合金属光子晶体的成功制备,为小传感体积新型生物传感器的开发提供了性能良好的金属光子晶体芯片.     

The superprism effect using large area 2D-periodic photonic crystal slabs

The “superprism effect” is an effect observed in photonic crystal structures whereby the direction of light propagation is extremely sensitive to the wavelength and angle of incidence. To realize the superprism effect, new structures are presented which rely on the sensitivity of the phase velocity in a two-dimensional (2D) photonic crystal slab to observe angular magnification outside the photonic crystal medium. Constant frequency contour calculations for a photonic crystal slab of finite thickness are used to predict the phase velocity superprism effect. Further analysis using 2D finite-difference time-domain simulations indicate that a large area photonic crystal and wide excitation beam are necessary for clear observation of the superprism effect. A fabrication technique is demonstrated to achieve the structure's required nanometer-sized features over centimeter-scale areas.     

Design and performance evaluation of successive interference cancellation based Slotted Aloha MAC protocol

As a result of densification, the performance of the wireless networks has become highly interference-limited and energy inefficient. To overcome this problem, interference mitigation techniques such as Successive Interference Cancellation (SIC) can be used to decode multiple packets simultaneously at the receiver. In this context, we analyze a SIC-based Slotted Aloha (SIC-SA) Medium Access Control (MAC) protocol for wireless networks. We derive expressions for packets decoding probability and optimal transmission probability of the nodes of the SIC-SA MAC protocol. Our derivation is based on the order statistics of Independent and Identical/non-Identical exponentially distributed received-signal-powers from the nodes under the Rayleigh channel condition. Throughput, delay, and energy efficiency of the SIC-SA MAC protocol have been derived and validated against simulation. The effect of path loss exponent, SINR threshold, and the number of nodes on the performance of SIC-SA have been studied. The performance of SIC-SA in a network of nodes distributed randomly according to the Poisson Point Process has been analyzed. Extension of our analysis to Power Domain Non-Orthogonal Multiple Access (NOMA) has been demonstrated. We also analyzed the impact of imperfect estimation of channel state information and imperfect SIC at the receiver. Results show an improvement in performance metrics of SIC-SA over the traditional Slotted Aloha.     

嫦娥一号干涉成像光谱仪(IIM)2C级数据信息提取

通过分析Chang’E-1卫星所获取的高光谱数据的太阳高度角因素,选取了太阳高度角较高的IIM2C数据进行光谱定标。采用邻域平均法及邻域加权均值法对原始数据进行了杂点、条带修复。由于干涉成像光谱仪CCD阵列增益畸变以及它的自身问题使得干涉影像存在横向响应不均一性,提出采用基于子空间最大特征值法进行校正,结果影像亮度统计其强度表现均一,符合自然图像特征,并采用自编程序进行几何校正。运用国际上较为成熟的经验线性法对Chang’E-1IIM 2C数据进行绝对定标;与此同时,为了修正线性定标的偏置系数及降低数据噪声,首次采用自适应小波变换法对辐射定标后数据进行后处理,确定了IIM2C数据可用波段。通过对比国际标准定标点数据,制订了嫦娥IIM2C数据分析方案,完成了第一幅完整的Chang’E-1IIM 2C月球正面反射率影像。     

ICP-AES测定高浓度基体下杂质元素的偏最小二乘法研究

建立了ICP-AES测定高浓度基体中微量杂质元素的偏最小二乘方法(PLS)。研究表明,PLS能有效校正高浓度基体干扰引起的测量误差,比多元光谱拟合法(MSF)能承受的基体浓度更高。当基体与杂质的含量比为1 000∶1～20 000∶1时,该方法的加标回收率在95%～105%之间。对于干扰效应与基体浓度呈非线性相关的体系,普通PLS的预测准确度不高,但使用基于样品浓度矩阵变换的偏最小二乘法(LIN-PPLS),则明显改善了预测的准确度。分别用MSF、普通PLS和LIN-PPLS对水系沉积物国家标准物质GBW07312中的Co,Pb和Ga进行测定,结果表明,LIN-PPLS的预测准确度优于普通PLS,而普通PLS的预测准确度优于MSF。     

超二代微光像增强器多碱光电阴极膜厚测量研究

介绍了多碱光电阴极的光学性能和光谱反射率特性,测量了多碱阴极的光谱反射率曲线.该曲线与普通光学膜层光谱反射率曲线相比,形状较不规则,原因是多碱阴极膜层存在光吸收.光谱反射率曲线上的干涉峰是入射光在玻璃与阴极膜层界面反射和在阴极膜层与真空的界面反射的两束光发生干涉的结果.根据干涉的原理,如果阴极膜层所反射的两束光的光程差为二分之一波长的偶倍数时,光谱反射将出现干涉加强峰;如果阴极膜层所反射的两束光的光程差为二分之一波长的奇倍数时,光谱反射将出现干涉减弱峰.根据超二代像增强器光谱反射干涉峰对应的波长,可以计算出其阴极膜层的厚度约为191 nm,比二代像增强器阴极膜层的厚度增加了38％.多碱阴极膜层厚度是影响多碱阴极灵敏度的一个关键参量,仅仅靠人眼观察阴极膜层颜色的方法不准确.实践证明,利用光谱反射的方法来计算阴极膜层厚度的方法简单有效.如果在多碱阴极的制作过程中进行光谱反射率的监控,那么将可以精确控制阴极膜层的厚度,对多碱阴极的研究将会更加深入,多碱阴极的灵敏度也将会得到进一步的提升.     

计算机模拟光波的干涉

采用时域有限差分方法模拟了光的干涉这一物理现象.在物理实验的教学过程中光学实验以其高精度、高复杂度使得在实验教学过程中产生了一些负面影响.学生往往花费了较大精力去调节仪器,最终却得不到满意的实验数据,甚至得不到正确的实验结果.针对这一问题,可以采用数值模拟的方法得到很好的解决.文中不但模拟了实验现象,还验证了实验的理论公式,使得学生在观察现象的同时,对理论公式也能产生深刻的认识,最终起到了良好的课堂效果.     

Aperture array Fabry-Perot interference filter

We demonstrate effective implementation of the Fabry-Perot interferometer with subwavelength aperture arrays on its two metal mirrors to achieve polarization-independent narrow band-pass filtering. By superimposing of aperture array fundamental resonance transmission with one of the Fabry-Perot interference peaks, the moderate filter insertion loss of −5 dB, narrow band-pass width of 15 μm, and efficient out-of-band rejection within the ∼0.1-3 THz range are reported. The Siemens-star-shaped apertures in arrays play an important role to achieve such polarization independence and small insertion loss.     

On-line removal of redox-active interferents by a porous electrode before amperometric blood glucose determination

A porous reticulated vitreous carbon (RVC) electrode and a disk electrode coupled in tandem in an electrochemical flow cell has been used for electrolytic removal of interferents before amperometric glucose detection. The electrolytic efficiency at the upstream RVC electrode is 100% at a flow rate of 0.1 mL min⁻¹ or lower. Potential interferents such as acetaminophen, ascorbic acid, and uric acid can be completely eliminated by electrolysis at the RVC electrode. A mixed monolayer comprising glucose oxidase (GOD) and ferrocenyl-1-undecanethiol preformed at the downstream gold disk electrode was used as a mediator-based amperometric glucose sensor. The dependence of the amperometric current on the glucose concentration exhibits good linearity across over three orders of magnitude. The glucose measurements were also found to be reproducible (RSD < 3.5%) and accurate. Unlike the chemiluminescence method, this device obviates the use of carcinogenic substrates and the glucose sensor performance is independent of the oxygen present in sample. On the basis that the RVC electrode requires minimal cleanup and the GOD-modified electrode remains stable for a week, the electrochemical flow cell should be amenable for automated on-line removal of redox interferents for other types of enzyme-based biosensors.