槲皮素-Sn(Ⅱ)配合物荧光、紫外及红外光谱的测量与分析

以NH4Cl-NH3·H2O为缓冲液,十六烷基三甲基溴化铵(CTAB)为荧光增强剂,用荧光分光光度计分别采集槲皮素、槲皮素-Sn(Ⅱ)配合物溶液、槲皮素-Sn(Ⅱ)-NH4Cl-NH3·H2O、槲皮素-Sn(Ⅱ)-NH4Cl-NH3·H2O-CTAB溶液以及将其溶液分别静置7h和21h后的荧光光谱,并对光谱进行分析.在不加CTAB的条件下,用紫外分光光度计分别测量加入缓冲液前后的紫外光谱.用漫反射方法测定配合物的红外光谱,并对其结构进行初步分析.在缓冲液的作用下,槲皮素-Sn(Ⅱ)配合物的结构发生了变化;通过分析,发现与缓冲液发生反应的主要基团为酚羟基,红外光谱中酚羟基的消失和NH 4基团的出现,说明了配合物中的酚羟基与NH 4发生了取代反应.     

Year Discrimination of Mild Aroma Chinese Liquors Using Three-Dimensional Fluorescence Spectroscopy Combined with Parallel Factor and Neural NetworkSCIEI北大核心CSCD

Three-dimensional fluorescence spectroscopy coupled with parallel factor analysis and neural network was applied to the year discrimination of mild aroma Chinese liquors. The excitation-emission fluorescence matrices (EEMs) of 120 samples with various years were measured by FLS920 fluorescence spectrometer. The trilinear decomposition of the data array was performed and the loading scores of and the excitation-emission profiles of four components were also obtained. The scores were employed as the inputs of the BP neural networks and the PARAFAC-BP identification model was constructed. 10 samples were collected from 10, 20 and 30 years of liquors respectively, and 30 samples were selected as the test sets. The remaining 90 samples were used as the training sets to build the training model. The year prediction of unknown samples was also carried out, and the prediction accuracy was 90%, 100% and 100%, respectively. Meanwhile, the discrimination analysis method and the multi way partial least squares discriminant analysis were compared, namely PARAFAC-BP and NPLS-DA. The results indicated that parallel factor combined with the neural network (PARAFAC-BP) has higher prediction accuracy. The proposed method can effectively extract the spectral characteristics, and also reduce the dimension of the input variables of neural network. A good year discrimination result was finally achieved.     

聚变堆高热流部件超汽化换热实验研究

搭建了常压水超汽化实验回路(HVL-Ⅰ),采用平面激光诱导荧光(PLIF)、高速摄影、微距摄影、粒子成像测速(PIV)等先进测量技术,开展聚变堆面对等离子体部件(第一壁、偏滤器)在高热流过冷沸腾工况下强化换热特性实验研究。选择三角形和矩形翅片的铬锆铜超汽化样件,实验工况为常压室温(296K),若丹明B 水溶液流速 0.3～0.5m•s⁻¹ 连续可调,热流密度～5MW•m⁻²。实验结果表明同等工况下,矩形翅片比三角形翅片换热效果显著增强,性能提升约30%～50%。微距摄影显示翅根涡流形态保持时间越短,越有利于小汽泡充分扩散,从而使换热得到强化。     

X射线荧光分析中谢尔曼方程逆问题的求解（理论影响系数法 …

本文首先在理论分析基础上,建立多元素样品的重量分数Ｃｉ、Ｘ射线荧光相对强度Ｒｉ与基体效应因子Ｆｉ的代数关系。然后,按照此关系导出两种求解谢尔曼方程逆问题的方法,即理论影响系数法和基本参数法。并用这两种方法分析了６个耐热钢标样,主量、常量元素的平均相对分析误差〈０．５％,对低含量轻元素Ｓｉ、Ｐ、Ｓ的分析也取得良好的结果。     

键合型铕-十一烯酸-硅橡胶复合材料的合成及其荧光性能

以铕-十一烯酸配合物和含氢硅油为原料,在铂催化剂作用下制备稀土有机硅加成产物。对产物进行红外光谱和核磁共振分析。结果表明,配合物键接在有机硅高分子主链上,加成产物为一种键合型的铕-十一烯酸-硅橡胶复合材料。荧光光谱分析确定复合材料的最佳激发波长为393 nm;最强发射波长为616 nm,为铕离子的特征发射。同时,随着铕离子浓度的增大,复合材料没有荧光猝灭现象。     

Luminescence efficiencies of self- and Tm activated CaWO4 under vacuum ultraviolet radiation excitation

Luminescence efficiency of self-activated CaWO₄ under 147 nm vacuum ultraviolet (VUV) radiation excitation is about 90% of that of BaMgAl₁₀O₁₇:Eu²⁺ (BAM), the commercial blue plasma display panel (PDP) phosphor. However, the color purity and the particle size of the former needs substantial modification before it can be considered for application in PDP. CaWO₄:Tm exhibits Tm³⁺ emission peaks in the blue region due to energy transfer from WO₄ to Tm³⁺ ions but the overall emission intensity under 147 nm excitation is reduced when compared to that of CaWO₄.     

Unsupervised cell identification on multidimensional X‐ray fluorescence datasets

A novel approach to locate, identify and refine positions and whole areas of cell structures based on elemental contents measured by X‐ray fluorescence microscopy is introduced. It is shown that, by initializing with only a handful of prototypical cell regions, this approach can obtain consistent identification of whole cells, even when cells are overlapping, without training by explicit annotation. It is robust both to different measurements on the same sample and to different initializations. This effort provides a versatile framework to identify targeted cellular structures from datasets too complex for manual analysis, like most X‐ray fluorescence microscopy data. Possible future extensions are also discussed.     

Study of Inx(O,OH,S)y buffer layer effect on CIGSe thin film solar cells

In_x(O,OH,S)_y buffer layer has been applied to Cu(In,Ga)Se₂(CIGSe) solar cell by chemical bath deposition (CBD). The cell efficiency was observed to be dependant on film growth mode of In_x(O,OH,S)_y buffer layer, which was affected by the CBD conditions such as sulfur chemical concentration and deposition time. The fabricated solar cell showing higher conversion efficiency was observed to have non-porous and uniform texture of buffer, whereas the lower conversion efficiency cells were found to have fibrous texture or detached texture of buffer. The fibrous texture and the detached texture induced high series resistance and lower shunt resistance, respectively, which all resulted in lower cell efficiency with reduced fill factor. External quantum efficiency and temperature dependence of open circuit voltage measurements revealed that the lower efficiency cells suffered from higher interface recombination loss due to the related defects.     

Mid-infrared InAsSb-based nBn photodetectors with AlGaAsSb barrier layers – Grown on GaAs,using an interfacial misfit array,and on native GaSb

InAsSb-based nBn photodetectors were fabricated on GaAs, using the interfacial misfit (IMF) array growth mode, and on native GaSb. At −0.1 V operating bias, 200 K dark current densities of 1.4 × 10⁻⁵ A cm⁻² (on GaAs) and 4.8 × 10⁻⁶ A cm⁻² (on GaSb) were measured. At the same temperature, specific detectivity (D^*) figures of 1.2 × 10¹⁰ Jones (on GaAs) and 7.2 × 10¹⁰ Jones (on GaSb) were calculated. Arrhenius plots of the dark current densities yielded activation energies of 0.37 eV (on GaAs) and 0.42 eV (on GaSb). These values are close to the 4 K bandgap of the absorption layers (0.32–0.35 eV) indicating diffusion limited dark currents and small valence band offsets. Significantly, these devices could be used for mid-infrared focal plane arrays operating within the temperature range of cost-effective thermoelectric coolers.     

利用核壳结构实现纳米颗粒的多色上转换发光

将多色荧光标记技术应用于生物信息检测可实现快速、实时、同步大规模检测目标生物分子的目的,利用上转换纳米粒子作为多色荧光探针可有效地避免生物组织自荧光对检测信号的影响。本文制备了具有核-壳结构的稀土氟化物纳米粒子,并通过在核与壳不同位置共掺杂不同浓度的敏化离子和发光离子来改变发光离子各发射峰之间的相对强度。利用不同颜色和强度的发射光谱实现了纳米粒子的多色上转换发光。利用透射电子显微镜成像、X射线衍射分析、发光光谱等测量手段对多色上转换发光纳米粒子进行了形貌、结构和上转换发光性质的表征。实验结果表明,具有核-壳结构的纳米粒子尺寸小于30 nm,呈球形。在980 nm红外光激发下,纳米粒子呈现从红色到蓝紫色的颜色可变的上转换发光。