Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy

ABSTRACT

The effect of transition elements, specifically Mn, Cr, V, and Mo, on dispersoid formation and mechanical properties in 6082 aluminum alloy was studied. The elevated-temperature mechanical properties were evaluated based on the compressive yield strength and creep resistance. The results indicated that the addition of Mn to the 6082 alloy resulted in the formation of a large number of the thermally stable α-Al(MnFe)Si dispersoids, thereby significantly improving the elevated-temperature mechanical properties of the alloy. Subsequent additions of Cr, V, and Mo increased the amount of Mn-bearing intermetallic phases, which decreased the supersaturation levels of Mn and Si in the α-Al, and consequently decreased the volume fraction of the dispersoids. The alloys containing Cr, V, and Mo exhibited similar yield strengths at 300°C and higher yield strengths at room temperature compared to the alloy containing only Mn. The size effect of the smaller dispersoids containing Cr, V, and Mo together with the solid-solution hardening of these elements could balance out the strength decrease resulting from the decreased volume fraction of the dispersoids. The additions of Cr, V, and Mo significantly increased the creep resistance of the Mn-containing 6082 alloy. Vanadium induced the highest creep resistance followed by Cr and Mo. Solute atoms of these elements with low diffusivity in the aluminum matrix contributed significantly to increasing the creep resistance at 300°C.     

A conjugated alkyne functional bicyclic polybenzoxazine with superior heat resistance

A difunctional benzoxazine (coPh‐apa) with a conjugated alkyne group is synthesized by the oxidative coupling reaction from a monocycle‐benzoxazine (Ph‐apa) containing an alkyne group. A model compound, 1,4‐diphenylbutadiyne (coPa), is used to study the curing reaction process of coPh‐apa by DSC, Fourier transform infrared spectroscopy, and ¹³C NMR, and the results suggest that the conjugated alkyne groups are involved in the crosslinking reaction via the trimerization reaction of the conjugated alkynyl groups and the Diels–Alder reaction. Furthermore, thermal properties of the polybenzoxazine are studied by dynamic thermomechanical analysis and thermogravimetric analysis. A glass‐transition temperature (T_gs) of as high as 412 °C and a char yield of 75.6% at 800 °C under nitrogen are obtained with the aid of the conjugated alkyne groups. Its excellent heat resistance dominates most thermosetting resins and will serve for heat shields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1587–1592     

Luminescent PtII and PtIV Platinacycles with Anticancer Activity Against Multiplatinum-Resistant Metastatic CRC and CRPC Cell Models

Platinum-based chemotherapy persists to be the only effective therapeutic option against a wide variety of tumours. Nevertheless, the acquisition of platinum resistance is utterly common, ultimately cornering conventional platinum drugs to only palliative in many patients. Thus, encountering alternatives that are both effective and non-cross-resistant is urgent. In this work, we report the synthesis, reduction studies, and luminescent properties of a series of cyclometallated (C,N,N′)Pt^IV compounds derived from amine–imine ligands, and their remarkable efficacy at the high nanomolar range and complete lack of cross-resistance, as an intrinsic property of the platinacycle, against multiplatinum-resistant colorectal cancer (CRC) and castration-resistant prostate cancer (CRPC) metastatic cell lines generated for this work. We have also determined that the compounds are effective and selective for a broader cancer panel, including breast and lung cancer. Additionally, selected compounds have been further evaluated, finding a shift in their antiproliferative mechanism towards more cytotoxic and less cytostatic than cisplatin against cancer cells, being also able to oxidize cysteine residues and inhibit topoisomerase II, thereby holding great promise as future improved alternatives to conventional platinum drugs.     

钙蛋白酶-10 基因SNP-19 与多囊卵巢综合征相关性研究

目的 探讨钙蛋白酶-10 基因（CAPN-10）单核苷酸多态性-19（SNP-19）与多囊卵巢综合征（PCOS）的相关性。 方法 采用聚合酶链反应- 限制性片段长度多态性（PCR-RFLP）技术,对107 例PCOS患者（PCOS 组）及111 例健康体检者（对照组）的CAPN-10 SNP-19 进行分析,并测定其性激素和生化指标。PCOS组再根据BMI与胰岛素抵抗（IR）稳态模型指数（HOMA-IR）分为肥胖组与非肥胖组、IR 组与非IR 组,分析CAPN-10 SNP-19 与其关系。结果 与对照组相比,PCOS 组BMI、空腹血糖（FPG）、TG、TC、LDL、黄体生成素（LH）、黄体生成素/ 卵泡刺激素（LH/FSH）、睾酮（T）均升高（均P＜0.01）。PCOS 组CAPN-10 SNP-19 1等位基因及1/2基因型频率均高于对照组（均P＜0.05）;且CAPN-10 SNP-19 1/2基因型PCOS 发病风险较1/1、2/2 基因型增加约2倍（OR=1.9,95％CI=1.1~3.3,P＜0.05）。CAPN-10 SNP-19 1、2等位基因频率PCOS 肥胖组与非肥胖组、IR 组与非IR组比较均无统 计学差异（均P＞0.05）;PCOS 肥胖组和IR组CAPN-10 SNP-19 1/2基因型频率分别高于非肥胖组和非IR 组,但差异均无统计学意义（均P＞0.05）。结论 CAPN-10 SNP-19 与PCOS 遗传易感性有关,可能与PCOS 肥胖及IR 无关。     

Preparation and solution properties of a novel cationic hydrophobically modified polyacrylamide for enhanced oil recovery

Abstract

A novel cationic water-soluble monomer allyldimethylisooctylammonium bromide (ADIAB) containing a short-chain alkane was synthesized successfully. This monomer was copolymerized with acrylamide and sodium acrylate to produce hydrophobically modified polyacrylamide (HMPAM) using solution polymerization without surfactants. The structures of monomer ADIAB and HMPAM were characterized with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Influence of preparation condition on viscosities of products was studied. The aqueous solution viscosity of the terpolymer was also investigated as functions of concentration, temperature and salinity. The results showed that when the temperature exceeds the 60?°C and NaCl concentration exceeds about 2000?mg/L, the temperature and salt tolerance characters of terpolymer were demonstrated. The enhanced oil recovery tests were initially carried out using homogeneous sandpack models.     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

硫酸铜掺杂TiO2涂层对碳纤维抗氧化性能的影响

采用溶胶-浸渍法,以CuSO₄为烧结助剂在碳纤维表面制得TiO₂涂层。利用XRD、SEM和TEM分析了涂层相组成及形貌,通过静态等温氧化实验考察了涂层碳纤维抗氧化性能。结果表明：掺杂CuSO₄制备TiO₂涂层均匀完整致密,涂层相组成均为锐钛矿型TiO₂,且涂层厚度从45 nm提高至185 nm;与普通TiO₂涂层碳纤维相比,完全氧化温度从667 ℃上升到800 ℃,氧化活化能从118.390 kJ·mol^-1提高到152.562 kJ·mol^-1,CuSO₄的掺杂大大提高了TiO₂涂层碳纤维的抗氧化性能。     

Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.