Finite element formulation of thermal boundary layers

In this article we discuss the finite element discretization of the two-dimensional, incompressible, and turbulent boundary layers. The formulation of the momentum equation is essentially due to Baker and Soliman [1] with some modifications.The versatility and the accuracy of the method is established by considering several test cases. The predictions are satisfactory and compare favorably with alternative numerical techniques.     

Analysis of nitrogen-influenced surface near zones of ferrous materials by glow discharge spectroscopy (GDOS)

Glow discharge spectroscopy (GDOS) will be shown to be a quick, informative and simple method for quantitative depth profile analysis of elements of nitrided layers well suited for their quality control. By systematic variation of all glow discharge determining parameters it is possible to get an excellent depth resolution in the order of sub-m corresponding to a comparatively large analytical activated area (50 mm²). In this paper the behaviour of a number of important parameters related to sputtering of the activated area will be discussed. Some quantitative GDOS depth profiles of carbon and nitrogen of pure iron samples nitrided by different procedures will be shown as examples for application.     

A numerical investigation of the evolution of 2-D disturbances in hypersonic boundary layers and the effect on the flow structure due to the existence of shocklets

The evolution of 2-D disturbances in hypersonic boundary layer with Mach number 6,8, and 10 was investigated numerically by three different numerical schemes. At the entrance, second mode T-S waves with different amplitudes were introduced, and the relation between the Mach number and the amplitude of the disturbance when shocklets started to appear was investigated. By comparing the disturbance velocity profiles with those provided by linear stability theory, the effects of shocklets on flow structures were also investigated.     

发展在XLPE电缆绝缘内外侧的电树枝

以XLPE高压电力电缆内外侧绝缘中的电树枝特性为研究对象，通过分析电树枝引发与生长的统计实验规律和采用扫描电子显微镜分析发现，由于不同结晶状态的影响，电缆绝缘内外侧的电树枝特性存在很大的差异.引发于绝缘内侧电树枝引发时间短、生长速度快、电树枝形状具有多样性；起始于绝缘外侧的电树枝不仅引发时间长、生长速度极慢，而且电树枝形状(结构)比较单一.并对这两个位置电树枝的引发和生长机理进行了探讨. 关键词： 电树枝 结晶状态 统计规律 内侧和外侧绝缘层     

Growth kinetics of borided layers: Artificial neural network and least square approaches

The present study evaluates the growth kinetics of the boride layer Fe₂B in AISI 1045 steel, by means of neural networks and the least square techniques. The Fe₂B phase was formed at the material surface using the paste boriding process. The surface boron potential was modified considering different boron paste thicknesses, with exposure times of 2, 4 and 6 h, and treatment temperatures of 1193, 1223 and 1273 K. The neural network and the least square models were set by the layer thickness of Fe₂B phase, and assuming that the growth of the boride layer follows a parabolic law. The reliability of the techniques used is compared with a set of experiments at a temperature of 1223 K with 5 h of treatment time and boron potentials of 2, 3, 4 and 5 mm. The results of the Fe₂B layer thicknesses show a mean error of 5.31% for the neural network and 3.42% for the least square method.     

Multiple nano-TiO2 layers to prevent dye/nano-TiO2 from photodegradation under a UV-exposure environment

A device of multiple nano-TiO₂ layers was proposed and fabricated to prevent a dye/nano-TiO₂ region from serious photo-degradation. In this device, the top of the dye/TiO₂ region was designed to be coated using sol-gel nano-TiO₂ thin films to shield UV irradiation from the photo-degradation effect. The sol-gel TiO₂ was prepared in a low temperature (75 °C) and verified as nano-sized particles and an anatase crystalline structure. Different devices of the multi-layer samples fabricated using different compositions of nano-TiO₂ were produced and exposed for UV irradiation tests. Results show that the presence of the sol-gel TiO₂ films coated on top of the dye/TiO₂ region can significantly alleviate the dye photo-degradation under UV irradiation. This multi-layer device can effectively improve the photo-stability of the dye/TiO₂ region in a UV-exposure environment.     

Influence of (phospho)lipases on properties of mica supported phospholipid layers

The effect of enzymes: lipase from Candida cylindracea (L_Cc), phospholipase A₂ from hog pancreas (PLA₂) and phospholipase C from Bacillus cereus (PLC) to modulate wetting properties of solid supported phospholipid bilayers was studied via advancing and receding contact angle measurements of water, formamide and diiodomethane, and calculation of the surface free energy and its components from van Oss et al. (LWAB) and contact angle hysteresis (CAH) approaches. Simultaneously, topography of the studied layers was determined by Atomic Force Microscopy (AFM). The investigated lipid bilayers were transferred on mica plates from subphase of pure water by means of Langmuir-Blodgett and Langmuir-Schaefer techniques. The investigated phospolipid layers were: saturated DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine), unsaturated DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine), and their mixture DPPC/DOPC. The obtained results revealed that the lipid membrane degradation by the enzymes caused increase in its surface free energy due to the amphiphilic hydrolysis products, which may accumulate in the lipid bilayer. In result activity of the enzymes may increase and then break down the bilayer structure takes place. It is likely that after dissolution of the hydrolysis reaction products in the bulk phase, patches of bare mica surface are accessible, which contribute to the apparent surface free energy changes. Comparison of AFM images and the free energy changes of the layers gives better insight into changes of their properties. The observed gradual increase in the layer surface free energy allows controlling of the hydrolysis process to obtain the surfaces of defined properties.     

Boundary layers for parabolic perturbations of quasi‐linear hyperbolic problems

In this paper, we study the asymptotic relation between the solutions to the one‐dimensional viscous conservation laws with the Dirichlet boundary condition and the associated inviscid solution. We assume that the viscosity matrix is positive definite, then we prove the existence and the stability of the weak boundary layers by discussing nonlinear well‐posedness of the inviscid flow with certain boundary conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Examples of Quantification in XPS on 5f Materials

 Various aspects of quantification in actinide research using photoelectron spectroscopy are discussed. In particular, the influence of instrumental factors, different types of the background, and shape of the line intensities are addressed. We give several examples of quantitative analysis of actinide bulk compounds and thin films.