Hydrodynamic thickness and deformational properties of adsorption layers of poly(ethyleneoxides)

From the measurements of surface potentials of quartz capillaries before and after adsorption of poly(ethylene oxides) (PEO) of various molecular mass, an assessment of the equilibrium hydrodynamic thickness of the adsorption layers has been obtained. The results have been compared with those of independent measurements of . The flow of the polymer solution under increasing pressure drops at the ends of a capillary, which causes the corresponding shear stress () on the surface of adsorbed PEO layers, results in the deformation of the latter, which manifests itself in decreasing 5. The values decrease by several times when the shear stress rises to 2×10₂ N m^–2. Such values of have been obtained using thin capillaries (r = 5÷6 mm) and by application of the capillary electrokinetic method with pressure drops up to 5÷6 MPa.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 31–37, January, 1994.     

Application of laser ablation–inductively coupled plasma-mass spectrometry (LA–ICP–MS) to investigate trace metal spatial distributions in human tooth enamel and dentine growth layers and pulp

Human tooth enamel provides a nearly permanent and chronological record of an individuals nutritional status and anthropogenic trace metal exposure during development; it might thus provide an excellent bio archive. We investigated the micro-spatial distribution of trace metals (Cu, Fe, Mg, Sr, Pb, and Zn) in 196×339 m² raster pattern areas (6.6×10⁴ m²) in a deciduous tooth using laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS). Ablated areas include prenatal and postnatal enamel, the neonatal line, the dentine–enamel junction (DEJ), dentine, and the dentine–pulp junction. Topographic variations in the surface elemental distribution of lead, zinc, strontium, and iron intensities in a deciduous tooth revealed heterogeneous distribution within and among regions. ⁴³Ca normalized elemental intensities showed the following order: Sr>Mg>>Zn>Pb>Fe>Cu. Elevated zinc and lead levels were present in the dental pulp region and at the neonatal line. This study demonstrates the ability of LA–ICP–MS to provide unique elemental distribution information in micro spatial areas of dental hard tissues. Elemental distribution plots could be useful in decoding nutrition and pollution information embedded in their bio apatite structure.Presented in part at the 2002 Winter Conference on Plasma Spectrochemistry, Scottsdale, AZ, January 6–12, 2002. The poster was selected as an outstanding poster presentation.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

Thermal behaviour of advanced composite materials based on SiC fibres

Emanation thermal analysis (ETA) was used for characterization of thermal behaviour of SiC_f/SiC composites on heating in argon and air, respectively. Effect of gas environment (argon, air) and helium ions implantation on the microstructure development of the SiC_f/SiC composite prepared by chemical vapour infiltration (CVI) from Nicalon CG fibres was investigated under in situ conditions of heating. The annealing of near surface structure irregularities was observed in the range 280-700°C and evaluated by means of the mathematical model, assuming that the structure irregularities served as diffusion paths for radon. The ETA reflected the formation of amorphous silica and its subsequent crystallization to crystoballite. Morphology of the SiC_f/SiC samples before and after the heat treatments was characterized by means of SEM. This revised version was published online in July 2006 with corrections to the Cover Date.     

Emanation thermal analysis study of a sol-gel precursor for silica-titania waveguides

Emanation Thermal Analysis (ETA) was demonstrated as a tool for the characterization of microstructure changes of a sol-gel precursor for silica-titania layers deposited on the glass plate to be used as planar waveguides. Temperature ranges of 280-330 and 380-500°C, respectively, in which the densification of the layers took place, were determined by ETA under in situ conditions of the sample heating. Results of thermogravimetry were compared with the ETA data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

Depth profiles of shallow implanted layers by soft ion sputtering and total-reflection X-ray fluorescence

A new method suitable for depth profiling of shallow layers on different materials is presented. It is based on a soft and planar ion sputtering combined with differential weighing, total-reflection X-ray fluorescence (TXRF) spectrometry and Tolansky interferometry. By means of a stepwise repetition of these techniques it is possible to determine both density/depth and concentration/depth profiles. The respective quantities are expressed in terms inherent only to the sample and traceable to the SI-units or subunits gram, nanometer and mole. It is a unique feature of this method that density/depth profiles can directly be obtained from measurements without any calibration or theoretical approximation. The method is applied to a Si wafer implanted with Co ions of 25 keV energy and a nominal dose of 1×10¹⁶ cm⁻². The depth resolution is shown to be <3 nm while a total depth of some 100 nm can be reached. The concentration/depth profile is compared with RBS measurements, wet-chemical etching plus TXRF and Monte Carlo simulations. In view of the fact that only similar but not exactly the same samples have been examined by these methods, a good correspondence can be noticed.     

HPTLC on inert pre-coated layers of cellulose and of silica 50000

Summary In a manner analogous to that for surface-active silica gel, HPTLC pre-coated plates for nano TLC have also been developed from two inactive sorbents. The two materials are microcrystalline cellulose and a synthetically produced, porous silica (Silica 50000) with a very low specific surface area. The chromatographic properties of these inert sorbents and of the new HPTLC pre-coated plates prepared therefrom are examined in relation to separations of amino acid mixtures and carbohydrate mixtures and are related to the chromatographic properties of the inactive sorbents and TLC precoated plates used hitherto. The figure 50000 characterizes the type of silica. The average pore diameter of this sorbent is about 5000 nm.