Analysis of surface degradation of epoxy nanocomposite due to tracking under AC and DC voltages

The tracking phenomenon, a carbonaceous process, in epoxy nanocomposite material has been studied under the AC and DC voltage in the present work. It was observed that the tracking is more severe under the DC voltages, especially under positive DC voltage when compared to negative DC voltage. The leakage current during the tracking studies was measured and moving average technique was used to characterize the trend of current flow. It was noticed that an increase in nanoclay content to epoxy resin shows a reduction in magnitude of leakage current flow during tracking test. It was also observed that the magnitude of leakage current is more under negative DC voltage compared with positive DC/AC voltage. The magnitude of leakage current and the tracking time shows inverse relationship as evident from the present study. A drastic reduction in contact angle was observed for the specimens subjected to tracking test. It was confirmed that surface discharges also cause permanent damage to the insulating material. The WAXD studies indicated that up to 5 wt% of nanoclay in epoxy resin resulted in exfoliated structure. The TEM studies were carried out on the nanocomposite structures. The TG-DTA results showed that a maximum degradation of epoxy resin occurs at around 300 °C. From the EPR study it is realized that, in the tracking formed zone the spin concentration is more in epoxy nanocomposites indicating that tracking as a damage generating process.     

Simulation of compressibility of entrapped air in an incompressible free surface flow using a pressure-based method for unified equations

A pressure-based method is developed to solve the unified conservation laws for incompressible and compressible fluids. A polytropic law is used to model the compressibility of a gas and decouple the energy equation. The pressure field is calculated by solving a single-pressure Poisson equation for the entire flow domain. The effects of the compressibility of the gas are reflected in the source term of the Poisson equation. The continuities of pressure and normal velocity across a material interface are achieved without any additional treatment along the interface. To validate the developed method, the oscillation of a water column in a closed tube due to the compression and expansion of air in the tube is simulated. The computed time history of the pressure at the end wall of the tube is in good agreement with other computational results. The free drop of a water column in a closed tank is simulated. The time history of the pressure at the center of the bottom of the tank shows good agreement with other reported results. The developed code is applied to simulate the air cushion effect of entrapped air in a dam break flow. The computed result is in good agreement with other experimental and computational results until the air is entrapped. As the entrapped air pocket undergoes rapid pulsation, the pressure field of water around the air pocket oscillates synchronously.     

An Investigation of a Modal-Falsetto Register Transition Hypothesis Using Helox Gas

This study concerned the effect of the first subglottal formant (F1') on the modal-falsetto register transition in males and females. Phonations using air and a helium-oxygen mixture (helox) were used in a comparative study to tease apart possible acoustic and myoelastic contributions to involuntary register transitions. Recordings of the first subglottal formant and its accompanying bandwidths, and the lower and upper shift point marking the outer boundaries of abrupt register transitions, were obtained via a neck-mounted accelerometer, and analyzed using spectrograms and power spectra on a K-5500 Sona-Graph. The four subjects had their hearing masked bilaterally with speech level noise to increase the likelihood of involuntary register transition via minimized auditory feedback. In three of the four test subjects registration was surmised to be primarily a laryngeal event, as evidenced by the similar frequency dependency of voice breaks in both air and helox. It may be hypothesized that subglottal resonance influenced register transition in the fourth subject, as voice breaks rose with helox-induced phonation; however, this result did not reach statistical significance. Therefore, in this experiment subglottal resonance was not found to have a significant influence on register transition as originally hypothesized.     

Optimized incompressible smoothed particle hydrodynamics methods and validations

The solution of the Poisson's equation used by the incompressible smoothed particle hydrodynamics (ISPH) methods for estimating the pressure field is expensive in CPU time. The CPU time, consumed by the inversion of the operator ∇(1/ρ∇) and the estimation of the right hand side of the Poisson's equation, increases with the number N of particles used in a purely Lagrangian framework. In this work, this default of ISPH methods is overcome by solving the Poisson's equation on a Cartesian grid. This SPH-mesh coupling is equivalent to the particle in cell method. In a first step, in order to analyze its efficiency, the optimized version of two ISPH methods (divergence free and density invariant) is compared with the standard weakly compressible SPH method through two benchmarks of incompressible bidimensional flows characterized by the Reynolds number Re, Lamb-Oseen vortex (10 ≤Re≤ 100) and lid-driven cavity flow (100 ≤Re≤ 1000). In a second step, the numerical results obtained by the three SPH methods are compared to laboratory experimental data of a dam break flow in order to show the performance of the SPH-mesh coupling in a practical and complex flow problem. As in the configuration of the experimental setup, the numerical results are obtained for a Reynolds number Re = 3.8 10⁶.     

Parameters influencing the molecular weight of 3,6‐carbazole‐based D‐π‐A‐type copolymers

Condensation copolymerization reactions of carbazole 3,6‐diboronate with 4,7‐bis(5‐bromo‐2‐thienyl)‐2,1,3‐benzothiadiazole (DTBT) only produce low‐molecular‐weight donor (D)‐π‐acceptor (A) copolymers. High‐molecular‐weight copolymers for use in optoelectronic devices are necessary for achieving extended π‐conjugation and for controlling the copolymer processibility. To elucidate the cause of the persistently low molecular weight, we synthesized three 3,6‐carbazole‐based D‐A copolymers using copolymerizations of N‐9′‐heptadecanyl‐3,6‐carbazole with DTBT, N‐9′{2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethyl}‐3,‐6‐carbazole with DTBT, and N‐9′‐heptadecanyl‐3,6‐carbazole with alkyl‐substituted DTBT. We investigated several parameters for their influence on molecular copolymer weight, including the conformation of the chain during growth, the solubility of the monomers, and the dihedral angles between the donor and acceptor units. Size exclusion chromatography, UV–vis absorption spectroscopy, and computational studies revealed that the low molecular weights of 3,6‐carbazole‐based D‐A copolymers resulted from conjugation breaks and the resulting high coplanarity, which led to strong interactions between polymer chains. These interactions limited formation of high‐molecular‐weight‐copolymers during copolymerization. The strong intermolecular interactions of the 3,6‐carbazole moiety were exploited by incorporating 3,6‐carbazole units into poly[9′,9′‐dioctyl‐2,7‐flourene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] prepared from 9′,9′‐dioctyl‐2,7‐flourene and DTBT. Interestingly, the number average molecular weight increased gradually with increasing 2,7‐fluorene monomer content but the number of conjugation breaks was a range of 6–7. The hole mobilities of the copolymers were studied for comparison purposes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of Ultrafine Full-Vulcanized Powdered Rubber on the Properties of the Intumescent Fire Retardant Polypropylene

Ultrafine full-vulcanized powdered rubber (UFPR) was added into intumescent fire retardant polypropylene (IFR-PP) composites, and fire retardance, morphology, and properties of the composite were analyzed. Ammonium polyphosphate and pentaerythritol were used as the intumescent fire retardants (IFR). The mechanical properties (elongation at break increased from 70% to 110%) and the melt flowability of IFR-PP improved by adding a small quantity of UFPR (less than 0.5 phr) but decreased when the UFPR was more than 0.5 phr. At the same time, the fire retardance, as measured by the limiting oxygen index and the UL94 vertical test rating, and other mechanical properties decreased appreciably with adding UFPR. The reasons were analyzed by using SEM micrographs, and a model was proposed to explain the reasons.     

Molecular Wires in Single‐Molecule Junctions: Charge Transport and Vibrational Excitations

We investigate the effect of vibrations on the electronic transport through single‐molecule junctions, using the mechanically controlled break junction technique. The molecules under investigation are oligoyne chains with appropriate end groups, which represent both an ideally linear electrical wire and an ideal molecular vibrating string. Vibronic features can be detected as satellites to the electronic transitions, which are assigned to longitudinal modes of the string by comparison with density functional theory data.     

一种光子晶体谐振腔的TM模特性

构造了一种二维砷化镓石墨点阵柱状光子晶体谐振腔.利用时域有限差分方法计算了这种光子晶体谐振腔TM_y模的共振峰波长随应力和温度变化的情况.计算结果表明,这种谐振腔TM_y模的共振峰波长随x、y方向的应力变化以及随应力环境的变化均具有较好的线性特性,其应力响应灵敏度为0.013 69 nm/Mpa,且这种谐振腔沿x方向和y方向的应力响应灵敏度相同;同时,这种谐振腔的共振峰主峰随温度呈分段线性变化趋势,且具有最大1.4 nm/℃的温度灵敏度.另外,计算结果显示,这种结构的光子晶体谐振腔具有很好的频率开关特性.     

Incorporating human fatigue and recovery into the learning–forgetting process

The available learning and forgetting models do not consider the physical loading that performing a task requires. In some situations, physical loading results in workers’ fatigue on the job that is followed by rest breaks to alleviate it. The aim of this paper is to present the “learning–forgetting–fatigue–recovery model” (LFFRM) that addresses possible issues relating to workers’ capabilities and restrictions in manufacturing environments. Numerical examples are solved to address some research questions regarding the model optimization and its constraints. The main results show that incorporating learning into a production process decreases fatigue and improves the performance of the system. Worker fatigue, on the other hand, increases production time and decreases production output. A recovery break must be of enough length to alleviate some of the accumulated fatigue. However, longer recovery times extend the lead time and deteriorate the production performance due to forgetting.     

High-frequency magnetic properties of soft magnetic cores based on nanocrystalline alloy powder prepared by thermal oxidation

FeSiBNbCu nanocrystalline alloy powder was thermally oxidized in an air atmosphere to enhance an oxide layer formation on the surface of the powder and subsequently toroidal shape FeSiBNbCu nanocrystalline alloy powder cores were prepared by compaction at room temperature. The phase change on the surface of FeSiBNbCu nanocrystalline alloy powder by thermal oxidation was analyzed and its effect on the high frequency magnetic properties of the compacted cores was investigated. By thermal oxidation, the formation of the oxide layer consisting of Fe₂O₃, CuO, and SiO₂ on the surface of FeSiBNbCu nanocrystalline alloy powder was enhanced and the thickness of oxide layer could be controlled by changing the thermal oxidation time. FeSiBNbCu nanocrystalline alloy powder core prepared from the powder treated by thermal oxidation exhibits a stable permeability up to high frequency range over 10 MHz. The core loss could be reduced remarkably and the dc-bias property could be improved significantly, which were due to the formation of oxide layer consisting of Fe₂O₃, CuO, and SiO₂ on the FeSiBNbCu nanocrystalline alloy powder. The improvement in high-frequency magnetic properties of the FeSiBNbCu nanocrystalline alloy powder cores could be attributed to the effective electrical insulation by oxide layer between the FeSiBNbCu nanocrystalline alloy powders.