基于PLC的三维调整机同步控制系统设计与实现

针对三维调整机难以实现多台同步工作,设计了基于PLC的同步控制方案。在同步控制系统方案中,采用西门子PLC通过工业无线以太网进行同步控制,由各维度油缸的位移传感器来保证同步控制的精确性。经实验,证实了此系统的精度满足设计要求,实现了同步控制的效果。     

�Թ�ŵ�˫��������弤����ϵͳ�ĵ����Է���

用Matlab软件对大气压均匀辉光放电等离子体(OAUGDP)激励器系统的电特性进行了仿真。在仿真模型中,等离子体放电被建模成一个电压控制的电流源:当加在气隙上的电压超过等离子体产生电压时,该受控电流源接通;电流源的输出电流和所加电压之间遵循幂律。建立了一个OAUGDP激励器系统中等离子体放电的电路模型。仿真结果与实际激励器系统的实验数据很吻合。仿真结果表明,在不同的运行条件下,放电电流与电压之间遵循不同的指数幂律,仿真放电电流波形也不同。     

半导体激光器混沌光电延时负反馈控制方法研究

提出半导体激光器混沌光电延时反馈控制方法.通过附加一个光电延时电路控制系统,建立了三个有光电延时反馈条件下的注入激光混沌控制物理模型.进行了有控制时的最大Lyapunov指数分析.数字仿真发现,当调节延时时间和反馈光电流时,能控制激光混沌到3周期态、5周期态等;当周期键控光电流时,能控制激光混沌到8周期态、9周期态等;最后,通过组合应用光电延时反馈控制电路系统与附加周期调制驱动电流时,能有效地控制激光混沌到单周期态以及其他周期态. 关键词： 混沌 控制 激光器 光电转换     

Optical phase front control in a metallic grating with equally spaced alternately tapered slits

A technique capable of focusing and bending electromagnetic （EM） waves through plasmonic gratings with equally spaced alternately tapered slits has been introduced. Phase resonances are observed in the optical response of transmission gratings, and the EM wave passes through the tuning slits in the form of surface plasmon polaritons （SPPs） and obtains the required phase retardation to focus at the focal plane. The bending effect is achieved by constructing an asymmetric phase front which results from the tapered slits and gradient refractive index （GRIN） distribution of the dielectric material. Rigorous electromagnetic analysis by using the two-dimensional （2D） finite difference time domain （FDTD） method is employed to verify our proposed designs. When the EM waves are incident at an angle on the optical axis, the beam splitting effect can also be achieved. These index-modulated slits are demonstrated to have unique advantages in beam manipulation compared with the width-modulated ones. In combination with previous studies, it is expected that our results could lead to the realization of ootimum designs for plasmonic nanolenses.     

空间光学遥感器大功率控制电箱的热设计

根据空间应用电子设备的热控要求,对空间光学遥感器的控制电箱进行了热控设计。首先,总结了空间电子设备的热设计原则。针对空间光学遥感器控制电箱介绍了相应的热设计流程,对典型的大功率器件进行了温差推算,并说明了电箱的各电路板和大功率元器件的热设计方案。最后,通过热分析和热试验手段对热控电箱的热控方案进行了验证。试验结果表明：控制电箱的整机稳态工况热平衡温度小于30℃,各元器件的最高壳温在54.2℃以内。结果验证了该设计方案完全满足设计指标要求。     

低密度PMP聚合物泡沫成型控制

为了进一步提高低密度聚-4-甲基-1-戊烯（PMP）聚合物泡沫的成型性能,满足惯性约束聚变物理实验的需求,采用热诱导倒相法结合原位成型和机械加工来进行低密度PMP聚合物泡沫的成型控制研究。 研究结果表明：在热诱导倒相法制备过程中,聚合物溶液形成凝胶后施加气压,再将其在加压状态下在液氮中淬火,可以大大减少得到的PMP/溶剂混合体中大的孔洞,提高其强度,并且在溶剂脱除后PMP泡沫收缩变小,微观结构更加均匀, 孔径更加细小。采用原位成型和机械加工的方法,可以实现低密度PMP聚合物泡沫的精密成型控制。     

Control system for the CSNS ion source test stand

A penning plasma surface H- ion source test stand for the CSNS has just been constructed at the IHEP. In order to achieve a safe and reliable system, nearly all devices of the ion source are designed to have the capability of both local and remote operation function. The control system consists of PLCs and EPICS real-time software tools separately serving device control and monitoring, PLC integration and OPI support. This paper summarizes the hardware and software implementation satisfying the requirements of the ion source control system.     

高温超导无绝缘线圈励磁电压特性研究

本文通过实验研究了焊锡浸渍、励磁电流PI控制、励磁速率以及励磁幅值对高温超导无绝缘线圈励磁电压特性的影响。实验结果表明:高温超导无绝缘线圈励磁电压具有时延特性,焊锡浸渍、励磁电流PI控制分别会增大和减小时延特性,而励磁速率和励磁幅值不会影响时延特性;励磁电压幅值随励磁速率增大而增大;焊锡浸渍可降低励磁电压幅值,而励磁电流控制对励磁电压幅值影响不明显。     

Solvable model of quantum-optical feedback

A quantized optical cavity mode controlled by dissipation, two-photon source and feedback loop is studied. The feedback is activated by detections of photons leaving the cavity and consists of rapid phase shifts of the cavity field by π. The steady-state of the mode and first-order field correlation functions let analytical exploration. The feedback radically modifies the shape of the mode's spectrum - it gets asymmetry and its double-peaked structure manifests itself much more discernibly than in no-feedback case. Up to our knowledge, the present quantum feedback model is the first one which permits exact solution.     

Quantum control based on machine learning in an open quantum system

Designing robust control schemes in n-level open quantum system is significant for quantum computation. Here, we investigate two quantum control strategies based on supervised machine learning to suppress the quantum noise in an open quantum system. One is controlling state distance and the other is governing the average of a Hermitian operator. In this process, the dynamics of the system is mapped to a neural network where the control fields correspond to the weights. Besides, the system is transformed into the coherence Bloch space without using superoperator thus the complications are reduced largely. As an example, the two control protocols are demonstrated in a two-level and four-level systems, respectively. By applying these examples, the results show that the state of the system transfers to the target state and the average of a Hermitian operator to its minimum value in a given time despite disturbed by various types of noise.