基于匹配网络若干问题的推论

深入分析了匹配网络中存在的基本问题，并归纳出６个推论。     

提高客观测色精度的有效方法──相关综合匹配法

本文讨论一种测量颜色的相关综合匹配法。它根据各色散元件的光谱透过率和光电探测器的光谱灵敏度，选择最佳的综合权因子，以匹配颜色函数，从而改善测色精度和速度．     

Second-Harmonic Generation in Domain-Inverted Grating Induced by Focused Ion Beam

The fabrication of a periodic domain inversion in LiTaO₃ and LiNbO₃ using direct ion-beam writing is presented. The polarization of these materials can be reversed at room temperature by irradiating Si²⁺ ions into +c faces. A first-order periodic domain inversion with a 50% duty cycle, a depth of 300μ, and an interaction length of 1 mm was realized in LiTaO₃. Using this structure, 300μW of blue light was generated for a conversion efficiency of 0.25%/W.     

Tight Lower Bounds on the Size of a Maximum Matching in a Regular Graph

In this paper we study tight lower bounds on the size of a maximum matching in a regular graph. For k ≥3, let G be a connected k-regular graph of order n and let α′(G) be the size of a maximum matching in G. We show that if k is even, then , while if k is odd, then . We show that both bounds are tight. Research supported in part by the South African National Research Foundation and the University of KwaZulu-Natal.     

Reconstruction of Sparse Polynomials via Quasi-Orthogonal Matching Pursuit Method

In this paper, we propose a Quasi-Orthogonal Matching Pursuit (QOMP) algorithm for constructing a sparse approximation of functions in terms of expansion by orthonormal polynomials. For the two kinds of sampled data, data with noises and without noises, we apply the mutual coherence of measurement matrix to establish the convergence of the QOMP algorithm which can reconstruct $s$-sparse Legendre polynomials, Chebyshev polynomials and trigonometric polynomials in $s$ step iterations. The results are also extended to general bounded orthogonal system including tensor product of these three univariate orthogonal polynomials. Finally, numerical experiments will be presented to verify the effectiveness of the QOMP method.     

Terminal constrained robust hybrid iterative learning model predictive control for complex time-delayed batch processes

This work mainly addresses terminal constrained robust hybrid iterative learning model predictive control against time delay and uncertainties in a class of complex batch processes with input and output constraints. In this work, an equivalently novel extended two-dimensional switched system is first constructed to represent the process model by introducing state difference, output error and new relaxation variable information. Then, a hybrid predictive updating controller is proposed and an optimal performance index function including terminal constraints is designed. Under the condition that the switching signal meets certain conditions, the solvable problem of model predictive control is realized by Lyapunov stability theory. Meanwhile, the design scheme of controller parameters is also given. In addition, the robust constraint set is adopted to overcome the disadvantage that the traditional asymptotic stability cannot converge to the origin when it involves disturbances, such that the system state converges to the constraint set and meets its expected value. Finally, the effectiveness of the proposed algorithm is verified by controlling the speed and pressure parameters of the injection molding process.     

Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating (LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point (PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.     

Numerical Simulation of a CT-Scanned Counter-Current Flow Experiment

Counter-current flow occurs in many reservoir processes and it is important to understand and model these processes in order to operate them effectively. Both drainage and imbibition processes exist simultaneously during counter-current flow. It has thus proven difficult to model this type of flow using conventional techniques because of the impossibility of assigning a single capillary pressure curve applicable over the entire sample. In the current paper, a new saturation-history-dependent approach has been developed to simulate a counter-current flow experiment done with an X-ray CT scanner. Hysteresis in both capillary pressure and relative permeabilities is considered during simulation. Capillary hysteresis loop and relative permeabilities are extracted through history matching and a family of scanning curves is constructed connecting the two branches of the capillary hysteresis loop. Each gridblock of the sample is assigned a different scanning curve according to the local saturation history. History-dependent modeling of the experiment reproduced two-dimensional saturation distributions over time with good accuracy, which cannot be obtained with traditional simulation using only one capillary pressure curve.     

Convection laminaire forcée dans le sillage d'une plaque chaude placée dans un canal

In this Note, a numerical investigation of laminar convection wake above a heated plate placed in a channel is carried out. An analytical study based on a three region structure is proposed in the immediate neighbourhood of the trailing edge. Velocity and temperature at the centerline channel as well as the pressure gradient are presented in asymptotic expressions. Comparison of these results with numerical solutions enhances the analytical study. To cite this article: Z. Doulfoukar, A. Achiq, C. R. Mecanique 333 (2005).     

Computational method for optimal control of switched systems with input and state constraints

In this paper, we consider an optimal control problem of switched systems with input and state constraints. Since the complexity of such constraint and switching laws, it is difficult to solve the problem using standard optimization techniques. In addition, although conjugate gradient algorithms are very useful for solving nonlinear optimization problem, in practical implementations, the existing Wolfe condition may never be satisfied due to the existence of numerical errors. And the mode insertion technique only leads to suboptimal solutions, due to only certain mode insertions being considered. Thus, based on an improved conjugate gradient algorithm and a discrete filled function method, an improved bi-level algorithm is proposed to solve this optimization problem. Convergence results indicate that the proposed algorithm is globally convergent. Three numerical examples are solved to illustrate the proposed algorithm converges faster and yields a better cost function value than existing bi-level algorithms.