pH指示剂吸光度比法测定喷昔洛韦钠原料药含量

本文采用pH指示剂吸光度比法测定喷昔洛韦钠原料药的含量,并与紫外分光光度法和高效液相色谱法两种方法进行了比较。该法简单、准确、快速、灵敏且重现性好,有应用前景。     

还原偶氮测定硝基苯方法中样品背景存在的问题及改进

对还原偶氮法测定水中硝基苯分析方法中样品背景等方面存在的问题,以及对分析测定产生的影响进行了较为深入的分析和研究;提出了测定方法的改进意见.并通过硝基苯环境标准样品的实际测定,对改进前后的方法进行了对比和验证,取得了满意的结果.     

原子发射光谱内标法测量误差的研究

证明了原子发射光谱内标法的测量误差。当分析线和内标线的相对强度等于1时，测量误差最小。     

Field Patterns of the TE Modes in Ridge-Trough Waveguide

A single-ridge waveguide with a symmetrical longitudinal trough, designated as a ridge-trough waveguide has been used as a transition in a V-band (50-75 GHz) wafer probe recently. In this paper, the field patterns for the dominant TE mode and the first higher TE mode in ridge-trough waveguide with different configurations are presented by finite element method. The field patterns in this paper have important values for us to understand the transmission characteristics of ridge-trough waveguide, and will be of practical significance in designing ridge-trough waveguide components in microwave and millimeter wave engineering.     

A regularised boundary element formulation for contactless SAR evaluations within homogeneous and inhomogeneous head phantoms

This work presents a Boundary Element Method (BEM) formulation for contactless electromagnetic field assessments. The new scheme is based on a regularised BEM approach that requires the use of electric measurements only. The regularisation is obtained by leveraging on an extension of Calderón techniques to rectangular systems leading to well-conditioned problems independent of the discretisation density. This enables the use of highly discretized Huygens surfaces that can be consequently placed very near to the radiating source. In addition, the new regularised scheme is hybridised with both surfacic homogeneous and volumetric inhomogeneous forward BEM solvers accelerated with fast matrix–vector multiplication schemes. This allows for rapid and effective dosimetric assessments and permits the use of inhomogeneous and realistic head phantoms. Numerical results corroborate the theory and confirms the practical effectiveness of all newly proposed formulations.     

乘子罚函数分光光度法同时测定复方阿斯匹林片中的三组分含量

用乘子罚函数法处理多波长分光光度数据同时测定复方阿斯匹林片中三组分的含量,模拟样品中阿斯匹林、非那西丁、咖啡因的平均回收率分别为100．4％、99．78％、100．6％,相对标准偏差分别为0．45％、0．56％、1．17％。对4个批号实际样品中的测定结果与标准方法的测定结果吻合。     

原子吸收光谱间接测定色氨酸的研究

色氨酸(Tryptophan,Trp)在碱性条件下与新生成的ZnS悬浮液反应,生成可溶性碱式色氨酸锌配合物,再用塞曼原子吸收光谱测定溶液中的总锌浓度即可间接的得到色氨酸的含量.优化了测定的最佳条件,在pH 9.10的2%硼砂底液中于室温下,使色氨酸试液与新生成的ZnS悬浮液反应22min,离心分离后测定上层清液的FAAS响应.在所选定的条件下色氨酸测定的线性浓度范围为0-18.5mg·mL-1,特征浓度为0.219mg·mL-1,检出限为1.414mg·mL-1.该法用于样品中的色氨酸测定,其相对标准偏差RSD为4.12%,方法的回收率在70.1%-120.3%之间.并对测定机理进行了探讨.     

Gd3+对Ca0.8Zn0.2TiO3:Pr3+红色发光材料的敏化作用

采用溶胶-凝胶法在较低温度下合成了红色发光材料Ca0.8Zn0.2TiO3:0.002Pr3 ,xGd3 .金属离子预先溶解含有柠檬酸的乙二醇溶液中.XRD表明在800℃灼烧2h形成了钛酸盐的晶体.荧光检测结果表明所合成样品的特征激发峰为330nm、特征发射峰为614nm,分别对应于O(2p)→Ti(3d)带间跃迁和Pr3 的1D2→3H4的特征发射.样品的发光强度随x的不同而不同,发光强度增强了29%-69%.当x＝0.0005时,即nPr3 :nGd3 ＝4∶1时样品的红色发光强度最强,发光强度增强了69%.