Modelling Dynamics of Amperometric Biosensors in Batch and Flow Injection Analysis

A mathematical model of amperometric biosensors has been developed. The model is based on non-stationary diffusion equations containing a non-linear term related to Michaelis–Menten kinetic of the enzymatic reaction. Using digital simulation, the influence of the substrate concentration as well as maximal enzymatic rate on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique. The model describes the biosensor action in batch and flow injection regimes.     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

A multisyringe flow-through sequential extraction system for on-line monitoring of orthophosphate in soils and sediments

A fully automated flow-through microcolumn fractionation system with on-line post-extraction derivatization is proposed for monitoring of orthophosphate in solid samples of environmental relevance. The system integrates dynamic sequential extraction using 1.0 mol l⁻¹ NH₄Cl, 0.1 mol l⁻¹ NaOH and 0.5 mol l⁻¹ HCl as extractants according to the Hieltjes-Lijklema (HL) scheme for fractionation of phosphorus associated with different geological phases, and on-line processing of the extracts via the Molybdenum Blue (MB) reaction by exploiting multisyringe flow injection as the interface between the solid containing microcolumn and the flow-through detector. The proposed flow assembly, capitalizing on the features of the multicommutation concept, implies several advantages as compared to fractionation analysis in the batch mode in terms of saving of extractants and MB reagents, shortening of the operational times from days to hours, highly temporal resolution of the leaching process and the capability for immediate decision for stopping or proceeding with the ongoing extraction. Very importantly, accurate determination of the various orthophosphate pools is ensured by minimization of the hydrolysis of extracted organic phosphorus and condensed inorganic phosphates within the time frame of the assay. The potential of the novel system for accommodation of the harmonized protocol from the Standards, Measurement and Testing (SMT) Program of the Commission of the European Communities for inorganic phosphorus fractionation was also addressed. Under the optimized conditions, the lowest detectable concentration at the 3σ level was ≤0.02 mg P l⁻¹ for both the HL and SMT schemes regardless of the extracting media. The repeatability of the MB assay was better than 2.5% and the dynamic linear range extended up to 7.0 mg P l⁻¹ in NH₄Cl and NaOH media and 15 mg P l⁻¹ whenever HCl is utilized as extractant for both the HL and SMT protocols.     

Determination of methylated dibenzothiophenes in environmental sarnples by on-line HPLC-CGC

Concurrent solvent evaporation with a loop-type interface was used for on-line HPLC-CGC in the analysis of methylated dibenzothiophene (DBT) isomers in oil samples. The chromatographic behavior of 20 methyl DBT's was studied by HPLC on an aminopropylsilane DBTA phase and by GC on a selective methyl-phenylsilicone phase. That provided a method for analyzing by GC-flame photometric detection, the individual components of the DBT family, previously picked out of the crude oil matrix by HPLC. The GC oven temperature was shown to be critical during HPLC eluent introduction into the GC pre-column. Too high a temperature induced a severe broadening of early eluted peaks whereas a temperature too close to the boiling point of the liquid at the inlet pressure induced double peaks. Optimized conditions were retained on this basis and may be used for the analysis of other families of polyaromatic hydrocarbons.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

流动注射—化学发光法测定苯甲醛

依据苯甲醛增强没食子酸－过氧化氢－氢氧化钠体系化学发光的性质，建立了苯甲醛的流动注射化学发光分析法。     

Some observations on the automation by flow injection analysis of the spectrophotometric determination of amino acids and proteins witho-phthalaldehyde

Automation by flow injection analysis with Spectrophotometric detection of the determination of total amino acids and proteins witho-phthalaldehyde is not straightforward. The use of spectrophotometry, instead of spectrofluorimetry, and of N-acetyl-L-cysteine, instead of the conventional mercaptoethanol is advantageous because of the lower variability of absorptivities with respect to fluorescence yields, and the larger stability of the derivatives. Under adequate working conditions and with leucine as reference, the procedure can be used for the evaluation of total amino acids. A similar procedure is proposed for the analysis of proteins in a sample. Limits of detection are 1 × 10^–5 M for amino acids, and 1 × 10^–6 M for proteins, respectively.     

Evaluation of a PTV injector for quantitative analysis of volatile compounds at low concentrations

The performance of a PTV injector operated in the solvent venting mode with Tenax in the glass insert was evaluated with synthetic mixtures containing 5 to 50 ng of n-alkanes, ethyl esters, n-alcohols, and carboxylic acids. The influence of the sampled amount, the injected volume, and the nature of the solvent on accuracy and precision were studied. Coefficients of variation of relative (normalized) peak areas and absolute peak area ratios of each compound to the standard are of the order of 5 %.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

On-line photo-derivatization with flow injection and liquid chromatography-atmospheric pressure electrospray mass spectrometry for the identification of indoles

The application of on-line photochemistry with flow injection (FI) and liquid chromatography (LC) in conjunction with atmospheric pressure electrospray mass spectrometry (LC-APESI-MS) for the identification of similar indole derivatives is reported here. The photo-transformation of the indole compounds is strongly affected by the substituent groups on the aromatic and heterocyclic rings. Upon photolysis for 2.5 min, the mass spectrum of tryptamine (Try) which has no OH substituent on the aromatic ring does not differ greatly from that obtained without photolysis. However, after photolysis of serotonin (Ser) which has one OH group on C5 of the aromatic ring, the mass spectrum indicates the formation of dimers and higher molecular weight ions. The fragmentation pattern of 5-hydroxytryptophol (Phol) without photolysis resembles that of Ser with a base peak of m/z 160. Upon photolysis using MeOH-H₂O (10/90), Phol is found to form a base peak at m/z 375 (100%) and a major peak at m/z 214 (66%) in addition to other ions with lower abundance. Melatonin (Mel) and tryptophan (Phan) upon photolysis are found to form high molecular weight ions with a relative low abundance. The mass spectrum of indole-3-acetic acid (Inaa) with on-line photolysis also shows different ions that are not formed without photolysis.