添加非金属元素Si对固体超强酸SO_4~(2-)/TiO_2的改性研究

采用共沉淀法引入Ｓｉ对ＳＯ２－４／ＴｉＯ２进行改性，制得了ＳＯ２－４／Ｔｉ－Ｓｉ－Ｏ系列固体超强酸，试样经ＩＲ、ＳＥＭ、ＸＲＤ表征和低温正戊烷异构化活性测试，发现超强酸中心是硫酸根离子与金属原子Ｔｉ结合形成的双配位螯合结构，在超强酸性的样品中ＴｉＯ２均呈锐钛矿晶型。引入Ｓｉ仅迟滞ＴｉＯ２晶化过程，控制Ｓｉ在ＳＯ２－４／Ｔｉ－Ｓｉ－Ｏ体系中的含量可以有效调节固体超强酸的酸性，并提高正戊烷异构化反应的选择性。     

人类A3腺苷受体拮抗剂1,2,4-三唑并[1,5-α]喹喔啉衍生物的QSAR研究

采用遗传算法构建了27种人类腺苷受体拮抗剂1,2,4-三唑并[1,5-α]喹喔啉衍生物与受体之间的亲和性的QSAR模型.为得到理想模型,计算了拓扑学、热力学、空间、电子拓扑状态和量子化学描述符.结合这些参数得到最终模型:ENpKi=13.407-0.027*FC-8-0.033*FC-8 0.845*Atype_C_28-19.493*Shadow_XYfrac.计算得到的统计学指标为:LOF=0.291,r2=0.766,ra2dj=0.723,F-test=17.974,PRESS=3.469,CV-r2=0.791.通过对模型进行分析,得到如下结论:降低C-8位亲电、亲核原子的前线电子密度的权重和分子在XY平面的投影分数,增加疏水性原子类型描述符Atpye_C_28的值,都对增加化合物分子与受体的亲和性有利.利用此模型合理的设计了两个新的化合物,并预测具有较高的结合活性.该研究为喹喔啉衍生物作为人类A3腺苷受体拮抗剂的结构改造提供理论指导,并为进一步研究受体与配体亲和性机理奠定理论基础.     

粮谷中灭草松残留量检测的GC及GC-MS/MS研究

试验证明GC-ECD及GC-MS／MS两种方法均能用于粮谷中残留除草剂灭草松的测定。GC-MS／MS法可同时进行定性和定量分析,测定结果的可靠性较高。GC-ECD法具有较高的灵敏度,用于定量分析的效果较好。提出一种可与上述两种方法接用的试样预处理方法。10 g试样用甲醇提取其中的测定组分,再用正己烷萃取除去脂肪。用稀盐酸调节水相的酸度至pH≤3, 用二氯甲烷将灭草松萃取至有机相。在45℃减压干燥除去溶剂,所得浓缩的残渣溶于0．2 mL甲醇中并进行甲烷化和纯化(用固相萃取法),所得残留灭草松溶于1 mL正己烷中供GC-ECD或 GC-MS／MS测定。用两种方法进行粮谷试样的分析,测定结果的RSD值依次为2．3％-4．7％和 3．5％-6．7％。用标准加入法测得两方法的回收率依次为77％-98％和80％-102％,方法的检出限为0．01 mg·kg-1。     

Room‐Temperature Solution‐Processed PbS Quantum Dot Solar Cells

Colloidal quantum dots (CQDs) are attractive absorber materials for high‐efficiency photovoltaics because of their facile solution processing, bandgap tunability due to quantum confinement effect, and multi‐exciton generation. To date, all published performance records for PbS CQDs solar cells have been based on the conventional hot‐injection synthesis method. This method usually requires relatively strict conditions such as high temperature and the utility of expensive source material (pyrophoric bis(trimethylsilyl) sulfide (TMS‐S)), limiting the potential for large‐scale and low‐cost synthesis of PbS CQDs. Here we report a facile room‐temperature synthetic method to produce high‐quality PbS CQDs through inexpensive ionic source materials including Pb(NO₃)₂ and Na₂S in the presence of triethanolamine (TEA) as the stabilizing ligand. The PbS CQDs were successfully prepared with an average particle size of about 5 nm. Solar cells based on the as‐synthesized PbS CQDs show a preliminary power conversion efficiency of 1.82%. This room‐temperature and low‐cost synthesis of PbS CQDs will further benefit the development of solution‐processed CQD solar cells.     

CexTi1-xO2复合氧化物的结构及负载CuO对NO还原性能研究

采用共沉淀法制备了不同摩尔比(x=0,0.1,0.2～0.9,1.0)的CexTi1-xO2复合氧化物,考察了CuO/CexTi1-xO2对NO+CO反应的活性,并用BET,TPR和XRD等技术对各试样进行了表征。结果表明,试样的结构和还原特性随焙烧温度变化而变化。XRD检测表明,x值从0.1增加到0.5时,650℃焙烧的试样已形成了CeTi2O6物相,且主要以无定形状态存在;试样经800℃焙烧后晶化完全;x>0.6时,一些TiO2已经进入了CeO2晶格,形成了Ce Ti固溶体。催化剂活性评价表明CuO/CexTi1-xO2(650℃)对NO+CO反应具有较好的活性,其活性随x值变化而变化。TPR及XRD结果表明CuO与CeTi2O6之间存在很强的相互作用,CeTi2O6物相的形成使CuO的还原峰温由380℃提前到200℃,而CuO的存在又促进CeTi2O6的还原峰温从600℃提前至200～300℃。     

Reaction kinetics of the selective liquid phase hydrogenation of styrene oxide to β-phenethyl alcohol

Liquid phase hydrogenation of styrene oxide using 1% Pd/C and NaOH as a promoter was found to give selectively β-phenethyl alcohol (PEA) under very mild conditions (313–333 K; 0.68–5.5 MPa). The kinetics of this system was investigated by collecting initial rate data in a batch slurry reactor. Rate of hydrogenation was found to decrease beyond a certain concentration of both hydrogen (>3 MPa) and styrene oxide (>0.5 kmol/m³). A Langmuir–Hinshelwood type rate equation has been proposed based on the initial rate data in the kinetic regime. The model predictions agree very well with the experimentally observed concentration–time data indicating the applicability of the proposed rate model.     

Friedel-crafts acylation of 2-methoxynaphthalene over h-beta catalysts: effect of Si/Al ratio

The acylation of 2-methoxynaphthalene with acetic anhydride was carried out over zeolite beta catalysts having various Si/Al ratios. It was found that the reaction performance is strongly dependent on the Si/Al ratio of the catalyst. The catalytic reaction features were elucidated in terms of the acidic properties of the catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

Molecule-Responsive Fluorescent Sensors of α-Helix Peptides Bearing α-Cyclodextrin, Pyrene and Nitrobenzene Units in Their Side Chains

-Helix peptides bearing one unit of -cyclodextrin (-CD), one unit of pyrene and one unit of nitrobenzene (NB) in their side chains have been designed and synthesized as novel molecule-responsive devices.In both the CD-peptides, -PR17 and -PL17, the NB unit is separated from the CD unit by two turns of the helix. Two reference peptides (PL17, and -P17,) have also been synthesized. The circular dichroism studies in the peptide absorption region (200–250 nm)of -PR17 and -PL17 suggestthat the CD-peptides form stable-helixstructures (83–77%), which was destabilized by accommodating guest molecules (e.g., n-pentanol) into the CD cavity. It suggests that formation of intramolecular host–guest(CD–NB) complex stabilized thehelical structure and exogenous guest molecule excluded the appending NB moiety from inside to outside of the CD cavity, thereby causing destabilization of the helical structure and increasing the random coil content. The ICD spectra of the peptides in the pyrene and nitrobenzene absorption region (250–40 nm) suggest that NB forms inclusion complex with CD. The fluorescence studies revealed that the fluorescence of the pyrene unit is quenched by the NB unit in -PR17 and -PL17. The fluorescence intensity increases with increasing guest concentration for the CD-peptides.This guest-responsiveenhancement in the fluorescence intensity can be explained in terms of increased distance between the pyrene and NB moieties, which is caused by exclusion of the NB moiety from the CD cavity by guest accommodation. Using the guest-responsive fluorescence quenching properties of the CD-peptides, we have obtained binding constants for various short chain alkanols. -PL17 has higher binding affinity to the guest molecules than its isomer, -PR17, indicating that the location of functional groups on the peptide scaffold is important in molecule detection.     

Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.