β—环糊精对D／L—酪氨酸对映体的手性识别及超分子包合物的合成

利用圆二色谱研究了β－环糊精（β－ＣＤ）对Ｄ／Ｌ酪氨酸的手性识别行为，制备出了β－ＣＤ与Ｌ－酪氨酸（Ｌ－Ｔｙｒ）的固体超分子化合物，并用元素分析、薄层分析、Ｘ射线粉末衍射及热分析对包合物进行了表征，用荧光光谱法测定了包合物的形成常数．实验结果表明，β－ＣＤ具有选择包结Ｌ－酪氨酸的特性；主客体形成１１的包合物，其组成为Ｌ－Ｔｙｒ／β－ＣＤ·１２Ｈ２Ｏ；稳定常数为５．１３×１０３Ｌ／ｍｏｌ；包合物的热稳定性比主客体皆有改善     

Fast simultaneous determination of 23 veterinary drug residues in fish,poultry, and red meat by liquid chromatography/tandem mass spectrometry

The misuses of veterinary drugs can result in the accumulation of residues in food of animal origin that can make its way to the final consumer. Herein we describe a simple method for the accurate determination of beta-lactams, quinolones, sulphonamides, and tetracyclines in fish, poultry, and red meat. No extraction cartridges were used; instead, the extraction process consisted of the addition of an organic solvents, shaking, centrifugation, and dilution. An extensive validation process demonstrated an excellent linearity (R² ≥ 0.99) for 23-drug residues. The recovery of drugs in different matrices at two concentration levels (n = 6) was in the range of 82–119%. The method was proved to be repeatable and reproducible with intra/inter-day measurements (RSDs lower than 20%). The quantification limits of drug residues were in the range of 0.8 to 45.3 ug/kg, which is well below the maximum residue limits set by most regulatory authorities. This method was successfully applied to the routine analysis of 20 fish, poultry, and red meat samples (n = 60).     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

Comparison of purge and trap GC/MS and spectrophotometry for monitoring petroleum hydrocarbon degradation in oilfield produced waters

Results of using a field spectrophotometer and its appropriate protocols as a surrogate method for an oilfield produced water treatment process is presented. Methylene chloride extractions of the produced water before and after treatment maintained a yellow color pigment that was directly proportional to the hydrocarbon concentration. From this, an absorption spectrum and standard curve were developed. A resultant linear plot of the standard curve indicated that there is an excellent correlation (r²=0.9847) between the varying concentrations and the associated absorbance values at a wavelength of 400 nm. Total n-alkane concentration comparisons between the laboratory GC/MS analysis and the spectrophotometry analysis generated data of similar accuracy and precision at concentrations ranging from 1 to 137 mg/l (alpha=0.05). Linear comparisons between GC/MS and spectrophotometric coefficients were near unity, with the constant being near zero, with a correlation coefficient (r²) of 0.99. Based on this study, spectrophotometry is a complimentary method to GC/MS for determining total n-alkane concentrations in oilfield produced water samples.     

高温固相法合成LiNi1/3Mn1/3Co1/3O2及其性能研究

采用高温固相法合成出层状锂离子电池正极材料LiNi_1/3Mn_1/3Co_1/3O₂。通过XRD、ICP、SEM和电化学测试手段对产物的结构、组成、形貌及电化学性能进行了研究。XRD结果表明此方法合成的LiNi_1/3Mn_1/3Co_1/3O₂具有标准的α-NaFeO₂型层状结构，SEM照片显示颗粒粒径大约在500 nm左右，粒径分布较窄。以20 mA·g^-1电流密度放电，充放电电压在2.8～4.4 V之间，其首次放电比容量为170 mAh·g^-1，40次循环容量保持率为85.3%。进一步加入石墨导电剂后，同样条件下首次放电比容量变为179 mAh·g^-1，50次循环容量保持率为89.6%。容量衰减主要发生在前10次循环。XRD和SEM测试表明循环初期容量衰减的原因是由材料本体结构变化和界面反应共同作用的结果。     

Synthesis and characterization of aromatic polyamides containing alkylphthalimido pendent groups

A series of polyisophthalamides containing pendent phthalimido groups and flexible side spacers were prepared from four novel diacids and three commercial aromatic diamines. These polyamides were prepared in high yields and with high molecular weights by direct polycondensation with triphenyl phosphite and pyridine as condensing agents. The weight‐average and number‐average molecular weights, measured by gel permeation chromatography, were 70,000–137,000 and 47,000–86,000 g/mol, respectively. The novel polyamides were amorphous and readily soluble and showed glass‐transition temperatures of 150–240 °C, as measured by differential scanning calorimetry. Thermogravimetric analysis showed that the 10% weight‐loss temperatures in nitrogen were 355–430 °C, a significant improvement in thermal stability having been observed with the increase in the side‐chain length. A theoretical quantum mechanical study was successfully carried out to explain these results. Flexible and tough films, cast from polymer solutions, showed tensile strengths of 50–125 MPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3711–3724, 2002     

Naphthalene Complexation by β-Cyclodextrin: Influence of Added Short Chain Branched and Linear Alcohols

Naphthalene forms 1 : 1 complexes with -cyclodextrin (-CD)in water. The binding constant is 377 ± 35 M^-1. Addition of linear or branched alcohols causes a reduction in the apparent strength of naphthalene binding (K_app) compared to the value in the absence of additives. For example, 1% 1-pentanol reduces K_app to 184 ± 31 M^-1. Branching does not alter K_app much for a given number of carbon atoms, e.g., it is 113 ± 9 M^-1for 2-pentanol and 116 ± 8 M^-1for 3-pentanol. The exception to this is tert-butanol for which K_app is 577 ± 40 M^-1. The variation in K_app as a function of [1-pentanol] yields values for the individual equilibrium constants contributing to K_app. This reveals that a ternary complex forms involving naphthalene, the CD and 1-pentanol. The constant for formation of the ternary complex is 99 ± 29 M^-2. NaI quenching of naphthalene fluorescence indicates that the CD cavity partially protects the naphthalene excited state fromthis water phase quencher. Interestingly, the Stern–Volmer constant is lower in the presence of 1-pentanol than in its absence, although there should be more unbound (and therefore more NaI accessible) naphthalene in the former system than in the latter. These apparently contradictory results are discussed in terms of ternary complex formation.     

Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

One-step synthesis of the chelate oxides of bis(trialkylantimony) by an oxidative method

The chelate oxides of bis(trimethylantimony) (Me₃SbL¹)₂O (i = 1 or 2, L¹-acetylacetonate, L² - trifluoroacetylacetonate) and bis(triethylantimony) (Et₃SbL¹)₂O have been obtained in 79–85% yields by a one-step oxidation of trialkylantimony withtertbutylhydroperoxide in the presence of -diketones in benzene at 20 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 154–155, January, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No. 94-03-08846).     

Cyphostemmins A-B, two new antifungal oligostilbenes from Cyphostemma crotalarioides (Vitaceae)

Two new antifungal resveratrol dimers, cyphostemmins A-B (1–2), have isolated from the roots of Cyphostemma crotalarioides planch (Vitaceae) together with resveratrol 3 and previously known reseveratrol dimers (4–7). Structures of these new compounds have been established on the basis of their MS and ¹H and ¹³C NMR spectroscopic data.