基于室温脉冲量子级联激光器的NO气体检测中的光谱处理方法研究

报导了采用基于室温脉冲量子级联激光器的脉内光谱检测技术,利用中心波长为1904 cm^-1的量子级联激光器,在实验室对NO气体样品进行检测的研究结果. 针对单线直接吸收光谱反演算法进行了研究,介绍了基线拟合的最小二乘算法以获取其吸光度,根据HITRAN数据库中相应吸收谱线的吸收线强,采用扫描积分实现了气体浓度的反演,避免了标气标定造成的误差及污染;通过拟合残差分析得到了系统的检测限,达到34×10^-6 m.     

水溶性CdTe:Mn量子点的双光子吸收

采用激发波长800 nm、脉宽50 fs、重复频率1 kHz的Ti:sapphire放大飞秒激光器作为激发光源,利用开孔Z扫描技术研究了不同粒径的CdTe:Mn量子点的非线性吸收性质。理论计算结果表明,同一生长时间CdTe:Mn量子点的双光子吸收系数是CdTe量子点的1.1倍,其双光子吸收系数随量子点尺寸的减小而增大,这是由于CdTe:Mn量子点非线性吸收属于反饱和吸收,掺杂了Mn元素,减小了表面缺陷浓度,表明掺杂量子点具有很好的双光子吸收现象。     

Evaluation of Spatial Scan Statistics for Irregularly Shaped Clusters

Spatial scan statistics are commonly used for geographic disease cluster detection and evaluation. We propose and implement a modified version of the simulated annealing spatial scan statistic that incorporates the concept of “non-compactness” in order to penalize clusters that are very irregular in shape. We evaluate its power for the simulated annealing scan and compare it with the circular and elliptic spatial scan statistics. We observe that, with the non-compactness penalty, the simulated annealing method is competitive with the circular and elliptic scan statistic, and both have good power performance. The elliptic scan statistic is computationally faster and is well suited for mildly irregular clusters, but the simulated annealing method deals better with highly irregular cluster shapes. The new method is applied to breast cancer mortality data from northeastern United States.     

调制自由载流子吸收测量半导体载流子输运参数的三维理论

推导出用于测量半导体载流子输运特性(载流子寿命、载流子扩散系数和前表面复合速度)的调制自由载流子吸收(modulated free carrier absorption, MFCA)检测技术的三维理论模型,给出了调制自由载流子吸收检测信号与调制频率和抽运-探测光相对距离的关系.定性分析了在不同调制频率时各个载流子输运参数对径向位置扫描曲线(信号与两束光相对距离的关系)的影响,结果表明调制自由载流子吸收检测信号对各个参数的灵敏度随抽运-探测光相对距离的增加而增加.仿真和实验结果表明,通过拟合不同调制频率时调 关键词： 调制自由载流子吸收 载流子输运特性 径向位置扫描     

标准圆筒试验技术与数据处理方法研究

 对标准圆筒试验技术与数据处理方法进行了深入研究,在狭缝扫描实验中建立了新型、高效的照明技术、底片判读方法以及数据处理方法,得到了精度高、信息丰富的圆筒壁质点上的位移、速度、加速度和比动能结果。同时,通过VISAR技术直接测量了圆筒外表面径向膨胀速度-时间曲线,进而积分得到位移-时间曲线,与狭缝扫描结果相互印证和补充,进一步提高了测试可靠性。     

Nd:YAG激光器光栅式扫描预处理的计算模拟与优化分析

 采用计算模拟的方法,研究了光栅式扫描预处理的扫描方式以及脉冲能量波动、定位误差对预处理效率的影响。研究发现,脉冲能量波动及其定位误差使预处理效率降低,同时其影响与扫描方式之间存在相互调制作用,因此可以通过选择合适的扫描方式以及扫描间隔来优化预处理流程,提高预处理效率。此外发现,光斑呈等边三角形排列时的预处理效率优于正方形。     

基于快速扫描光学延迟线谐振扫描的相位调制方法

提出利用快速扫描光学延迟线(Rapid Scanning Optical Delay Line,RSOD)作为光学相干层析成像(Optical Coherence Tomography,OCT)系统的相位调制器,并采用正弦驱动方式(谐振扫描)来提高扫描频率,进而实现高频相位调制的方法.介绍了基于RSOD相位调制器的干涉信号包络解调方法,分析了大振镜低频率线性驱动、小振镜高频线性驱动和大振镜高速正弦驱动三种实施方案对OCT性能的影响,并针对谐振扫描方案中轴向扫描的非线性提出了图像畸变定量校正的方法.结果表明:RSOD大振镜谐振扫描的模式能够兼顾系统成像速度、成像范围以及系统信噪比的要求,是一种行之有效的相位调制方法.     

L-MBE法生长ZnO薄膜的退火研究

研究了空气退火对于激光分子束外延(L-MBE)法制备的ZnO薄膜光学及结构特性的影响,报道了采用小角度X射线分析(GIXA)技术对于ZnO薄膜退火前后的表面及界面状况的定量分析结果.RHEED衍射图样表明,薄膜经过380℃及600℃原位退火后,其表面仍然较为粗糙.而XRD在面(in-plane)Φ扫描结果显示出经过800℃空气退火之后,薄膜具有更好的外延取向性.GIXA分析结果表明,800℃退火后ZnO薄膜的表面方均根粗糙度从退火前的1.13 nm下降为0.37 nm;同时ZnO/Al2O3界面粗糙度从2.10 nm上升为2.59 nm.ZnO室温PL结果显示,退火后薄膜紫外近带边发光强度比退火前增大了40倍,并出现了源于电子－空穴等离子体(EHP)复合的N带受激发射峰,激发阈值约为200 kW/cm2.     

Convergence rates of the blocked Gibbs sampler with random scan in the Wasserstein metric

ABSTRACT

This paper establishes explicit estimates of convergence rates for the blocked Gibbs sampler with random scan under the Dobrushin conditions. The estimates of convergence in the Wasserstein metric are obtained by taking purely analytic approaches.     

Pitfalls in the experimental recording of ultrasonic (backscatter) polar scans for material characterization

The ultrasonic polar scan (UPS), either in transmission, reflection or backscatter mode, is a promising non-destructive testing technique for the characterization of composites, providing information about the mechanical anisotropy, the viscoelastic damping, the surface roughness, and more. At present, the technique is merely being used for qualitative purposes. The limited quantitative exploration and use of the technique can be primarily ascribed to limitations of current theoretical models as well as the difficulty to perform accurate, and more importantly, reproducible UPS experiments. Over the last years, we have identified several potential pitfalls in the experimental implementation of the technique which severely deteriorate the accurateness and reproducibility of a UPS. In this paper, we make an inventory of the most important difficulties, illustrate each of them by a real experiment and present a feasible mediation, either numerical or experimental in nature. Once the experimental set-up is fine-tuned to overcome these pitfalls, it is expected that the recording of high-level UPS experiments, in combination with numerical computations, will facilitate the technique to become a fully quantitative non-destructive characterization method.