微孔和介孔材料中的热化学

这篇论文综述了美国加州大学戴维斯分校科学院院士Navrotsky课题组多年来在多孔材料上取得的一系列热化学研究结果。讨论了热化学对微孔、介孔材料的结构稳定性和合成过程的影响。借助多种测热手段对影响骨架结构的热焓、热熵和自由能进行了系统的测量和计算。研究数据表明一系列纯硅分子筛、介孔材料和磷酸铝多孔材料同相应的石英相和块磷铝矿相相比能量上最多只高出15 kJ·mol-1。一系列纯硅分子筛的熵值比石英相高出3.2—4.2 J·K-1·mol-1；在0—12.6 J·K-1·mol-1范围内相对应的自由能几乎没有差别。因此，对不同微孔、介孔材料，其骨架结构在能量上是几乎没有区别的。另外，本文通过介绍一种新型测热方法——原位测热，揭示了分子筛合成过程中的动力学和成核/结晶机理。     

尼龙6与半芳香性非晶尼龙原位共混物的结构与性能

一种半芳香的非晶尼龙共聚物溶解于熔融的己内酰胺中,引发后者负离子开环聚合原位制备尼龙6与非晶尼龙的共混物.与纯尼龙6相比较,此原位共混物的强度与模量显著提高.非晶区呈现单一的玻璃化转变,表明共混物为均相体系,其组分的相容性源于负离子聚合过程中链交换反应引起的共聚.与纯尼龙6相比较,此共混物的熔点与结晶度显著降低.此外,与纯尼龙6只存在α晶不同,共混物中伴生有大量的γ晶.当非晶尼龙含量为20 wt%时,绝大部分晶体为γ晶.然而,共混物中球晶仅有一定程度细化.共混物强度和模量的提高被认为主要源于非晶区分子活动能力降低以及γ晶相对含量的提高.     

多相催化反应原位红外系统及其应用

设计和建立了一套能耐高温的用于多相催化反应研究的原位红外系统，反应温度从室温到１１５０Ｋ，系统真空为１．０＊１０＾５－１．０－１０＾－４Ｐａ，红外光谱检测范围为４８００－２００ｃｍ＾－１。此系统扩展了原仪器的功能，提高了仪器利用率和效率。     

In situ generated pyroglutamate bridged polyoxotitaniums with strong circular dichroism signal

In this text, we use inexpensive and natural amino acid, successfully obtained the asymmetric crystallization of three PTCs, [Tis(O~iPr)_(14)(μ_2-O)(μ_3-O)_2(D/L-pGlu)_2](D-PTC-53; L-PTC-53; H2 pGlu=pyroglutamic acid) and [Ti_6(O~iPr)_(14)(μ_2-O)(μ_3-O)_2(D-pGlu)_2][Ti_6(O~iPr)_(14)((μ_2-O)(μ_3-O)_2(L-pGlu)_2](D,L-PTC-53). Interestingly, in situ lactamide reaction starting from glutamic acid to pyroglutamic acid was observed. In addition,the chirality features of these PTCs have been thoroughly discussed.The two enantiomers crys tallize in chiral P21 space group.The optically pure pGlu ligands transform its chirality to the inorganic titanium oxo clusters. As a result, the stack of these inorganic clusters generates homochiral helical chains along the characteristic axial direction.Apart from the microscopic structural analysis, the macroscopic solid-state samples exhibit unusual strong circular dichroism(CD) signals,further verified the homochiral feature of the enantiomers.     

原位氧化还原沉淀水热合成法制备LixMn2O4尖晶石

Li xMn2O4尖晶石是新一代的锂离子二次电池正极材料 [1], 其合成方法对材料的电化学性质影响很大[2].常规合成大多采用高温固相反应法, 此法具有反应温度高, 反应时间长, 容易产生缺陷和产物不纯净等缺点, 导致所合成的锂离子二次电池正极材料的性能较差. 目前用水热合成法制备电池正极材料Li xMn2O4尖晶石尚未见文献报道. 本文在常规水热合成法的基础上采用原位氧化还原沉淀水热合成法 [3]制备前驱物, 该法合成条件更温和, 而且使材料的综合性能得到了改善和提高.      

分子筛改性气—液毛细管柱及其性能考察

以原位合成法制备的分子筛膜对玻璃毛细管内壁进行改性后，成功地制备了常规口径及大口径分配ＳＣＯＴ柱，并对毛细管柱的性能进行了评价。     

磷化氢与环烯烃反应的原位^3^1P NMR研究

本文应用加压原位核磁共振波谱技术, 在反应温度50-70℃、反应压力1.0-2.0MPa, 氘代苯为溶剂, 偶氮二异丁腈为引发剂的条件下, 考察了磷化氢与环烯烃1, 5-环辛二烯、双环戊二烯、1, 3-环己二烯、1, 4-环己二烯及1, 5, 9-环十二三烯的反应。实验结果表明, 磷化氢与1, 5-环辛二烯反应主要生成双环膦杂环壬烷; 与其它环烯烃均不生成膦杂环化合物, 仅为一取代伯膦或二取代仲膦产物。磷化氢与环烯烃反应仍为串行机理。     

选相原位法合成立方氮化硼的关键影响因素

利用选相原位法在水溶液中成功制备出了立方氮化硼晶体，对反应条件进行了优化。结果表明，利用选相原位法合成立方氮化硼的最佳实验条件是：反应压力为10.0 MPa，在氯离子加入下利用混合氮源进行反应。在该条件下得到了纯相的立方氮化硼晶体。     

Concavine, an unusual diterpenic alkaloid produced by the fungus Clitocybe concava

A novel alkaloid with an unprecedented ring system consisting of a dodecahydro-7-oxa-9a-aza-benzo[a]azulene ring (1), has been isolated from cultures of Clitocybe concava (Basidiomycetae). Its structure and relative stereochemistry were elucidated on the basis of spectroscopic data. Concavine presents a weak antibacterial activity.     

In situ sensing of the middle atmosphere with balloonborne near-infrared laser diodes

Since 1997, two near-infrared laser diode sensors have been developed with the support of the CNES, the French space agency, to provide in situ data of H(2)O, CH(4) and CO(2) in the middle atmosphere. The realized instruments were flown from stratospheric balloons within the framework of European campaigns for the study of stratospheric ozone and water vapor and were involved in the validation of the ODIN and ENVISAT satellites. In this paper, we describe the developed laser probing technique, we report atmospheric measurements and finally we discuss future perspectives, particularly the in situ laser sensing of the lower atmosphere of Mars and the implication of the laser hygrometers in balloon campaigns at mid-latitudes and tropical regions to investigate the sources and sinks of stratospheric H(2)O.