三核铁甲酸簇合物[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2(O_2CH)]·2H_2O在乙炔、水汽体系中的反应行为

本文研究了[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2(O_2CH)]·2H_2O(简称)在乙炔、水汽体系中的反应行为。发现当温度高于220℃,脱落部分配体的具有活化乙炔进行加成反应的性能。采用原位红外光谱法和气相色谱法对此反应过程进行了跟踪探索,报道了产物的定性及半定量结果。     

一种CCD辅助测量基模(TEM_(00))激光光斑尺寸的方法

激光光束是一种振幅和等相位面都在变化的高斯球面光波 ,其最小光斑的位置和大小不易确定 ,本文在实践的基础上提出一种测量基模 ( TEM0 0 )激光光斑尺寸的方法 ,解决了这一问题     

Determination of the Gamow–Teller strength function for the neutron-deficient isotopes In

The Gamow–Teller β decays of the neutron-deficient indium isotopes ^104–107In have been investigated by using total absorption γ-ray spectrometry on mass-separated sources. The experimental Gamow–Teller strength, deduced as a function of the excitation energy in the daughter nuclei ^104–107Cd, is compared to shell-model predictions.     

红外光谱法原位监测亚微米树脂吸附反应

亚微米树脂吸附反应是一种快速反应,离线取样分析较困难。本文采用红外光谱技术原位监测亚微米树脂吸附庆大霉素反应,找到并验证了脂上吸附庆大霉素的吸收峰位置,并用偏最小二乘法建立定量模,模型的相关系数为０．９７９。在此基础上对不同初始浓度的吸附反应实现了原位监测。     

裂解温度对CVD法制备多壁碳纳米管的影响

用SEM、TEM、HRTEM及拉曼光谱方法研究了催化裂解乙炔制备多壁碳纳米管过程中裂解温度的影响,结果表明,在650℃～700℃裂解乙炔,可获得产量高、直径分布均匀、石墨程度高的多壁碳纳米管,并对裂解温度影响机制进行了分析和探讨。     

Effects of Si doping on the structural and electrical properties of Ge2Sb2Te5 films for phase change random access memory

The effects of Si doping on the structural and electrical properties of Ge₂Sb₂Te₅ film are studied in detail. Electrical properties and thermal stability can be improved by doping small amount of Si in the Ge₂Sb₂Te₅ film. The addition of Si in the Ge₂Sb₂Te₅ film results in the increase of both crystallization temperature and phase-transition temperature from face-centered cubic (fcc) phase to hexagonal (hex) phase, however, decreases the melting point slightly. The crystallization activation energy reaches a maximum at 4.1 at.% and then decreases with increasing dopant concentration. The electrical conduction activation energy increases with the dopant concentration, which may be attributed to the increase of strong covalent bonds in the film. The resistivity of Ge₂Sb₂Te₅ film shows a significant increase with Si doping. When doping 11.8 at.% of Si in the film, the resistivity after 460 °C annealing increases from 1 to 11 mΩ cm compared to the undoped Ge₂Sb₂Te₅ film. Current-voltage (I-V) characteristics show Si doping may increase the dynamic resistance, which is helpful to writing current reduction of phase-change random access memory.     

二茂铁在高温热解乙二胺制备CN_x纳米管过程中的催化性能研究

采用高温热解法 ,以二茂铁 乙二胺有机溶剂为前驱液制备CNx 纳米管过程中 ,改变前驱液配比 ,对 86 0℃ ,不同二茂铁含量条件下制备出的CNx 纳米管进行了产量统计、形貌结构观察和拉曼光谱研究。结果显示 :随着前躯液中二茂铁含量的相对增大 ,不但CNx 纳米管产量随之增加 ,而且产物中“竹节状”结构纳米管相对“中空”结构纳米管的比重也增大 ;拉曼光谱结果进一步证实了由于“竹节状”结构CNx 纳米管的含量或比重增加所带来的纳米管样品整体或平均含氮量的升高而导致的样品结晶有序程度的降低。对单独钴粉和二茂铁催化条件下生成CNx 纳米管的形貌观察进一步证实 :二茂铁在热解法制备“竹节状”结构CNx 纳米管过程中的浮动催化作用显著 ,有利于实现含氮量较高、结构均匀的CNx 纳米管的可控制生长。     

Visible and NIR luminescence of nanocrystalline β-Ga2O3:Er prepared by solution combustion synthesis

In this paper we report on facile solution combustion synthesis of erbium doped β-Ga₂O₃ with urea as fuel. The product was characterized using powder X-ray diffraction and transmission electron microscopy (TEM). X-ray diffraction and TEM showed that the material is nanostructured. Luminescence properties of β-Ga₂O₃:Er are studied with excitation in near infrared (Nd:YAG laser at 1064 nm) and visible (argon laser at 514.5 nm). A strong NIR emission of Er³⁺ in the window of minimal optical loss in silica based optical fibers, due to the ⁴I_13/2→⁴I_15/2 transition at 1.55 μm has been observed. Codoping with Yb³⁺ significantly increases the intensity of that important emission.     

Characterizing the influence of reinforcing resin on the structure and the mechanical response of filled isoprene rubber

In the present study, a specific type of reinforcing resin behavior is investigated using various mechanical approaches as well as microscopic techniques such as transmission electron microscopy and atomic force microscopy. Based on these observations, it could be concluded that the reinforcing resin introduces a synergistic effect with carbon black in order to strengthen the system. This is implied since the percolation threshold is significantly reduced and the morphology of the filler aggregates changes toward higher compactness, i.e., an increase of volume-to-size ratio with the addition of resin.