加脊TEM喇叭初步研究

针对恒阻抗TEM喇叭的上下面板电流分布不对称,采用小反射理论和阻抗渐变思想并通过设计脊结构对恒阻抗TEM喇叭进行了改进,研制了加脊TEM喇叭。仿真及实验研究结果表明:对于脉冲宽度约为1 ns的高斯脉冲,通过加脊在一定程度上改善了恒阻抗TEM喇叭上下面板电流分布的不对称性和E面辐射电场的不对称性;相对于相同口径的恒阻抗TEM喇叭,加脊TEM喇叭作为辐射天线和反射面脉冲天线馈源时系统的主轴远场辐射因子均有提高。     

液体聚了二烯原位涂层研究”──Ⅱ．电活性铝离子的形成及其对PBA的凝聚作用

采用电量法和失重法，测定了裸洁Ａｌ电极在不同浓度、温度和ＰＨ值的聚丁二烯酸（ＰＢＡ）溶液中阳极溶解速度，确定了电活性Ａｌ（Ⅲ）离子的最佳形成条件及其对ＰＢＡ的凝聚作用规律．结果表明，在６０℃温度，ｐＨ＝３．０的０．６ｍｏｌ·Ｌ－１柠檬酸＋１．０ｇ·Ｌ－１ＰＢＡ溶液中产生的电活性铝离子对水溶性不饱和高分子低聚物的凝聚作用最强．简单讨论了这一电凝聚作用的机理．     

Isolating Reactions at the Picoliter Scale: Parallel Control of Reaction Kinetics at the Liquid–Liquid Interface

Miniaturized liquid–liquid interfacial reactors offer enhanced surface area and rapid confinement of compounds of opposite solubility, yet they are unable to provide in situ reaction monitoring at a molecular level at the interface. A picoreactor operative at the liquid–liquid interface is described, comprising plasmonic colloidosomes containing Ag octahedra strategically assembled at the water‐in‐decane emulsion interface. The plasmonic colloidosomes isolate ultrasmall amounts of solutions (<200 pL), allowing parallel monitoring of multiple reactions simultaneously. Using the surface‐enhanced Raman spectroscopy (SERS) technique, in situ monitoring of the interfacial protonation of dimethyl yellow (p‐dimethylaminoazobenzene (DY)) is performed, revealing an apparent rate constant of 0.09 min^?1 for the first‐order reaction. The presence of isomeric products with similar physical properties is resolved, which would otherwise be indiscernible by other analytical methods.     

Uptake mechanism of oppositely charged fluorescent nanoparticles in HeLa cells

The endocytotic mechanisms involved in the uptake of charged polystyrene nanoparticles into HeLa cells were investigated. Uptake experiments were done in the presence or absence of drugs known to inhibit various factors in endocytosis. Independent of the particle charge, endocytosis is highly dependent on dynamin, F-actin, and tyrosine-specific protein kinases, which suggests a dynamin-dependent and lipid raft-dependent mechanism. However, cholesterol depletion did not hinder particle uptake. Regarding positively charged particles, macropinocytosis, the microtubule network, and cyclooxygenases are also involved. The clathrin-dependent pathway plays a minor role.     

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.      

Development of an automated in situ fracture stage for a ToF‐SIMS system

The design philosophy and implementation of an ultra high vacuum (UHV), PC controlled, automated in situ fracture stage for a surface analysis system is described. ToF‐SIMS spectra are shown to illustrate the improvement in spectral quality obtained from micro‐compact tension (CT) tests of polymer matrix fracture surfaces produced using the fracture stage in UHV compared to those obtained from a sample tested at air. This system is flexible in that by changing the capacity of the load cell it is possible to reduce or increase maximum loads as the specimen type and material demands. The stage has been designed with instrumental flexibility in mind, utilising commercial SEM‐stub type sample mounts, and can thus be used for AES/SAM and XPS investigations, as well as ToF‐SIMS analysis, in the authors' laboratory. Copyright © 2008 John Wiley & Sons, Ltd.     

Revealing the CO2 Conversion at Electrode/Electrolyte Interfaces in Li–CO2 Batteries via Nanoscale Visualization Methods

Lithium–carbon dioxide (Li–CO₂) battery technology presents a promising opportunity for carbon capture and energy storage. Despite tremendous efforts in Li–CO₂ batteries, the complex electrode/electrolyte/CO₂ triple-phase interfacial processes remain poorly understood, in particular at the nanoscale. Here, using in situ atomic force microscopy and laser confocal microscopy-differential interference contrast microscopy, we directly observed the CO₂ conversion processes in Li–CO₂ batteries at the nanoscale, and further revealed a laser-tuned reaction pathway based on the real-time observations. During discharge, a bi-component composite, Li₂CO₃/C, deposits as micron-sized clusters through a 3D progressive growth model, followed by a 3D decomposition pathway during the subsequent recharge. When the cell operates under laser (λ=405 nm) irradiation, densely packed Li₂CO₃/C flakes deposit rapidly during discharge. Upon the recharge, they predominantly decompose at the interfaces of the flake and electrode, detaching themselves from the electrode and causing irreversible capacity degradation. In situ Raman shows that the laser promotes the formation of poorly soluble intermediates, Li₂C₂O₄, which in turn affects growth/decomposition pathways of Li₂CO₃/C and the cell performance. Our findings provide mechanistic insights into interfacial evolution in Li–CO₂ batteries and the laser-tuned CO₂ conversion reactions, which can inspire strategies of monitoring and controlling the multistep and multiphase interfacial reactions in advanced electrochemical devices.     

Phase‐separated,conducting composites from polyaniline and benzobisthiazole rigid‐rod polymer

As an alternative method for processing polyaniline (PANI) from its conducting (protonated) state, vacuum casting of PANI from a methanesulfonic acid (MSA) solution provided films with electrical conductivity values of about 130–150 S/cm. In addition, we similarly prepared blended films of PANI · MSA and poly(p‐phenylene benzobisthiazole) (PBZT). This process eliminated the need for a subsequent protonation step and had the additional advantage that the conjugated PBZT may provide alternative conducting pathways. Conductivity values of the composite films ranged from 100 pS/cm to 124 S/cm, and the films displayed critical concentration behavior with a PANI threshold concentration of 2.75% and a critical exponent of 4. Transmission electron micrographs displayed phase‐separated regions with PANI forming a continuous network at high concentrations. Thermogravimetric analysis results demonstrated the thermal and thermooxidative stability advantage of the blends due to the PBZT component. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2539–2548, 2001     

Influence of the size and the morphology of ZnO nanoparticles on cell viability

Zinc oxide has attracted wide research interest due to its unique properties. Its band gap width, high refractive index, high electrical conductivity, and high optical transmission in the visible, etc., have made it suitable for a variety of applications, such as gas sensors, varistors, optoelectronic devices, etc. The first part of the paper presents three methods for the synthesis of zinc oxide nanoparticles: sol–gel, polyol, and hydrothermal methods. Then, we report on the characteristics of the powders in terms of structure, composition and morphology as well as of in-vitro testing on cell cultures. The influence of the nanoparticles on cell viability was evaluated by the lactate dehydrogenase method. It turns out that all ZnO powders tested present high cytotoxicity. Also, it is found that the synthesis method significantly influences cell viability, the lowest one being obtained for nanopowders synthesized by the sol–gel method.     

In Situ Hydrogenation and Crystal Chemistry Studies of Co2Si Type Compounds MgPd2 and Pd2Zn

The hydrogenation properties of the intermetallic compounds MgPd₂ and Pd₂Zn, crystallizing in the Co₂Si type, were studied by in situ thermal analysis (DSC) under hydrogen pressure. Pd₂Zn does not show any reaction with hydrogen while MgPd₂ reversibly forms the hydride MgPd₂H. Neutron diffraction on the deuterides reveals the compositions MgPd₂D_0.861(6) (ambient) and MgPd₂D_0.97(1) [308(2) K, 2.56(5) MPa deuterium] with hydrogen (deuterium) occupying distorted [MgPd₅] octahedral voids. Quantum mechanical calculations support the structure models and show the hydrogenation to be exergonic for MgPd₂ and endergonic for Pd₂Zn. MgPd₂H releases hydrogen under normal conditions or vacuum. Heating under hydrogen pressure leads first reversibly to MgPd₂H_≈0.2 and subsequently irreversibly to MgPd₃H_≈1 and MgH₂. MgPd₂, Pd₂Zn, and MgPd₂H were classified in a structure map. Trends of axial ratio changes upon hydrogenation of TiNiSi type and ZrBeSi type compounds are discussed.