Solid phase microextraction fills the gap in tissue sampling protocols

Metabolomics and biomarkers discovery are an integral part of bioanalysis. However, untargeted tissue analysis remains as the bottleneck of such studies due to the invasiveness of sample collection, as well as the laborious and time-consuming sample preparation protocols. In the current study, technology integrating in vivo sampling, sample preparation and global extraction of metabolites – solid phase microextraction was presented and evaluated during liver and lung transplantation in pig model. Sampling approaches, including selection of the probe, transportation, storage conditions and analyte coverage were discussed. The applicability of the method for metabolomics studies was demonstrated during lung transplantation experiments.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

Synthesis and Photocatalytic Properties of Nano‐crystalline In2O3

A nano‐crystalline In₂O₃ was synthesized using calcinations methods and was used as a photocatalyst to degrade sulfan blue (SB) dye. In addition, this study addresses the conditions of the degradation and the factors that influenced the catalysis. In₂O₃ was prepared by calcining In(OH)₃ at heat ranges of 100–700 °C for 24 h. The In₂O₃ was characterized using field emission scanning electron microscopy (FE‐SEM), an X‐ray diffractometer (XRD), thermogravimetric analysis (TGA), and high‐resolution X‐ray photoelectron spectroscopy (HR‐XPS). The activities of these samples were tested for the photocatalytic degradation of SB dye. The results indicated that the In(OH)₃ that was calcined at 300 °C for 24 h had the best performance.     

SnCl4/Sn catalyzed chemoselective reduction of glycopyranosyl azides for the synthesis of diversely functionalized glycopyranosyl chloroacetamides

A method for the chemoselective reduction of glycopyranosyl azides using SnCl₄ and tin metal as the reducing agent followed by in situ chloroacetylation of the synthesized glycopyranosyl amine was developed. This reaction is applicable to diversely functionalized glycopyranosyl azides for the synthesis of glycopyranosyl chloroacetamides.     

An analytical depth resolution function for the MRI model

The mixing roughness information depth model is frequently used for the quantification of sputter depth profiles. In general, the solution of the convolution integral for any kind of in‐depth distributions is achieved by numerical methods. For a thin delta layer, an analytical depth resolution function is presented, which enables a simple and user‐friendly quantification of measured delta layer profiles in AES, XPS and SIMS. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Light-induced cis/trans isomerization of cis-[Pd(L-S,O)2] and cis-[Pt(L-S,O)2] complexes of chelating N,N-dialkyl-N′-acylthioureas: key to the formation and isolation of trans isomers

Irradiation cis-[M(Lⁿ-S,O)₂] complexes (M = Pt^II, Pd^II) derived from N,N-dialkyl-N′-benzoylthioureas (HLⁿ) with various sources of intense visible polychromatic or monochromatic light with λ < 500 nm leads to light-induced cis?→?trans isomerization in organic solvents. In all cases, white light derived from several sources or monochromatic blue-violet laser 405 nm light, efficiently results in substantial amounts of the trans isomer appearing in solution, as shown by ¹H NMR and/or reversed-phase HPLC separation in dilute solutions at room temperature. The extent and relative rates of cis/trans isomerization induced by in situ laser light (λ = 405 nm) of cis-[Pd(L²-S,O)₂] was directly monitored by ¹H NMR and ¹⁹⁵Pt NMR spectroscopy of selected cis-[Pt(L-S,O)₂] compounds in chloroform-d; both with and without light irradiation allows the δ(¹⁹⁵Pt) chemical shifts cis/trans isomer pairs to be recorded. The cis/trans isomers appear to be in a photo-thermal equilibrium between the thermodynamically favored cis isomer and its trans counterpart. In the dark, the trans isomer reverts back to the cis complex in what is probably a thermal process. The light-induced cis/trans process is the key to preparing and isolating the rare trans complexes which cannot be prepared by conventional synthesis as confirmed by the first example of trans-[Pd(L-S,O)₂] characterized by single-crystal X-ray diffraction, deliberately prepared after photo-induced isomerization in acetonitrile solution.     

Investigation of block depth distribution in PS‐b‐PMMA block copolymer using ultra‐low‐energy cesium sputtering in ToF‐SIMS

Directed self‐assembly of block copolymers (BCPs) is a promising candidate for next generation nanolithography. In order to validate a given pattern, the lateral and in‐depth distributions of the blocks should be well characterized; for the latter, time‐of‐flight (ToF) SIMS is a particularly well‐adapted technique. Here, we use an ION‐TOF ToF‐SIMS V in negative mode to provide qualitative information on the in‐depth organization of polystyrene‐b‐polymethylmethacrylate (PS‐b‐PMMA) BCP thin films. Using low‐energy Cs⁺ sputtering and Bi₃⁺ as the analysis ions, PS and PMMA homopolymer films are first analyzed in order to identify the characteristic secondary ions for each block. PS‐b‐PMMA BCPs are then characterized showing that self‐assembled nanodomains are clearly observed after annealing. We also demonstrate that the ToF‐SIMS technique is able to distinguish between the different morphologies of BCP investigated in this work (lamellae, spheres or cylinders). ToF‐SIMS characterization on BCP is in good agreement with XPS analysis performed on the same samples. Copyright © 2013 John Wiley & Sons, Ltd.     

In2BP3O12:Cr3+宽带近红外荧光粉的发光性能及应用研究※

近红外光谱技术在安防监控、食品检测、生物成像、农业等领域具有重要应用价值, 而开发出紧凑高效的近红外光源是其大规模商业应用的前提. 荧光粉转换型近红外发光二极管(light emitting diodes, LED)光源具有结构紧凑、成本低、使用寿命长、发射光谱可调等优点, 因此近些年受到广泛关注, 其关键就在于开发出能被蓝光有效激发的高性能近红外荧光粉. 本工作利用高温固相法制备了一种新型宽带近红外荧光粉In₂BP₃O₁₂:Cr³⁺, 在480 nm激发下, 荧光粉发射峰值位于950 nm, 光谱覆盖了750~1350 nm范围, 半峰宽达到210 nm. 采用该荧光粉与商用蓝光InGaN LED芯片封装, 获得了具有宽带发射的近红外LED光源, 在60 mA的驱动电流下, 近红外光辐射功率为5 mW. 当采用该光源照射人的手掌, 用近红外电感耦合器(charge coupled device, CCD)相机能够对手掌中的血管进行清晰的成像. 上述结果表明该近红外荧光粉可用于制备基于蓝光芯片的宽带近红外LED光源, 并在生物医学等领域具有潜在应用前景.