NFR (Natural Frequency Region) approach for dynamic evaluation of anti-vibration systems with rebound resilience method

There is no universal method to perform dynamic analysis on solid rubber anti-vibration systems. In this article, an equivalent damping ratio is introduced to account for rubber hysteresis using a resilience experiment. A new concept, NFR (Natural Frequency Region), is defined for dynamic evaluation based on natural characteristics of a rubber anti-vibration system itself. Two typical industrial products were selected to verify the proposed NFR approach. The verification procedure involves three parts: natural frequencies, harmonic spectra and impact responses. The dynamic responses from both simulation and experiment have been compared and have not only demonstrated that the proposed approach is reliable but that it could also be used to guide the design of rubber anti-vibration systems in industry. The key points for applying this approach are also presented through the verification procedure.     

Further advances on low-energy lunar impact dynamics

We extend the analysis, started in a previous work [1], concerning the formation of lunar impact craters due to low-energy trajectories. First, we adopt the Circular Restricted Three-Body Problem and consider different choices of initial conditions inside the stable invariant manifold associated with the central invariant one in the neighborhood of the L₂ equilibrium point in the Earth-Moon system. Then we move to the Bicircular Restricted Four-Body Problem to study the effect of the Sun on the distribution of impacts on the Moon’s surface.     

Existence,nonexistence and multiplicity results for nonlocal Dirichlet problems

In this paper we establish various existence, nonexistence and multiplicity results for fully nonlinear Dirichlet problems associated to nonlocal Hamilton–Jacobi equations. This study is accomplished by a careful analysis of the principal eigenvalues of the elliptic operator. Resonance phenomena and anti maximum principles are also established.     

功能化离子液体液化木粉及其酚醛复合材料

合成了氯代1-(2-羟乙基)-3-甲基咪唑离子液体[He MIM]Cl、溴代1-乙胺基-3-甲基咪唑离子液体[Ae MIM]Br和氯代1-羧乙基-3-甲基咪唑离子液体[Ce MIM]Cl 3种功能化咪唑离子液体,并分别进行了红外与氢核磁结构表征.然后用3种离子液体液化木粉,液化3 h后向体系直接加入苯酚、甲醛和氢氧化钠,制备酚醛复合材料,并采用FTIR、XRD、DSC和SEM对酚醛复合材料进行结构、性能与形貌测试,研究离子液体种类对木粉液化率及酚醛树脂性能的影响.结果表明,离子液体及其液化木粉产物制备的酚醛复合材料性能得到明显改善.[Ce MIM]Cl液化效果最好,90℃液化率高达24.6%,当[Ce MIM]Cl与木粉质量比为10∶1时,制备的酚醛复合材料的游离醛释放量由原来的3.64%降低到0.92%.离子液体[Ae MIM]Br能将酚醛复合材料的冲击强度由原来的0.93 k J/m2提高到6.96 k J/m2,而[Ae MIM]Br及其液化的木粉产物制备的酚醛复合材料拉伸强度从原来的3.28 MPa提高到9.70 MPa.     

Effects of laser irradiation on optical properties of a-Se100−x Te x thin films

The effect of laser irradiation on the optical properties of thermally evaporated Se_100?x Te _x (x=8, 12, 16) chalcogenide thin films has been studied. The result shows that the irradiation causes a shift in the optical gap. The results have been analyzed on the basis of laser irradiation-induced defects in the film. The width of the tail of localized state in the band gap has been evaluated using the Urbach edge method. As the irradiation time increases, the values of the optical energy gap for all compositions decrease, while tail energy width increases. It is also observed that the optical energy gap decreases with increasing Te content in the alloy. These changes are a consequence of an increment in disorder produced by laser irradiation in the amorphous structure of thin film.     

Amplitude modulation control of escape from a potential well

We demonstrate the effectiveness of periodic amplitude modulations in controlling (suppressing and enhancing) escape from a potential well through the universal model of a damped Helmholtz oscillator subjected to an external periodic excitation (the escape-inducing excitation) whose amplitude is periodically modulated (the escape-controlling excitation). Analytical and numerical results show that this multiplicative control works reliably for different subharmonic resonances between the two periodic excitations involved, and that its effectiveness is comparable to those of different methods of additive control. Additionally, we demonstrate the robustness of the multiplicative control against the presence of low-intensity Gaussian noise.     

The Acceleration Severity Index in the impact of a vehicle against permanent road equipment support structures

The acceleration Severity Index (ASI), described in European Standard EN12767 (The passive safety of support structures for road equipment. Requirements, classification and the test method) is regarded as the most important indicator of impact on the occupants. The requirements for experiments are described, having in mind that the results depend on many factors. One of them is the selection of a vehicle to be used in the crash test. To perform numerical vehicle crash simulation, the finite-element models of permanent road equipment support structures were developed using the LS Dyna software available. To examine the response of the vehicle upon the impact, the acceleration severity index curves were calculated and visualised in Matlab.     

Fields,particles and universality in two dimensions

We discuss the use of field theory for the exact determination of universal properties in two-dimensional statistical mechanics. After a compact derivation of critical exponents of main universality classes, we turn to the off-critical case, considering systems both on the whole plane and in presence of boundaries. The topics we discuss include magnetism, percolation, phase separation, interfaces, wetting.     

Preparation,Crystal Structure,and Thermal Decomposition of the Intriguing Five‐coordinated Compound [Cu(IMI)4Cl]Cl (IMI = Imidazole)

The intriguing multi‐ligand compound [Cu(IMI)₄Cl]Cl ( 1 ) with the ligand imidazole (IMI) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure was determined by X‐ray single crystal diffraction and the crystallographic data showed that the compound belongs to the monoclinic P2₁/n space group [α = 8.847(2) Å, b = 13.210(3) Å, c = 13.870(3) Å, and β = 90.164(3)°]. Furthermore, the Cu^II ion is five‐coordinated by four nitrogen atoms from four imidazole ligands and a chlorine atom. The thermal decomposition mechanism was determined based on differential scanning calorimetry (DSC) and thermogravimetric (TG‐DTG) analysis. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa's method, respectively. The energy of combustion, enthalpy of formation, critical temperature of thermal explosion, entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) were measured and calculated.     

Pulsed-field separation of particles in a microfluidic device

We demonstrate the proof-of-principle of a new separation concept for micrometer-sized particles in a structured microfluidic device. Under the action of externally applied, periodic voltage-pulses two different species of like-charged polystyrene beads are observed to simultaneously migrate into opposite directions. Based on a theoretical model of the particle motion in the microdevice that shows good agreement with the experimental measurements, the underlying separation mechanism is identified and explained. Potential biophysical applications, such as cell sorting, are briefly addressed.