IMMOBILIZATION OF YEAST CELLS IN SEVERAL CONDUCTING POLYMER MATRICES

ABSTRACT

Immobilization of yeast cells (Saccharomyces cerevisiae) in different polymer matrices was performed by constant potential electrolysis. These matrices were polypyrrole (PPy); poly(methyl methacrylate)/polypyrrole (PMMA/PPy) and thiophene-capped poly(methyl methacrylate)/polypyrrole (TPMMA/PPy). The characterization of PMMA/PPy copolymer was achieved by Fourier-transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM). The invertase activity of immobilized yeast cells was determined. Optimum temperature, Michaelis-Menten constants and maximum reaction rates of the enzyme electrodes were compared with those of free yeast cells. The operational and storage stabilities of three different immobilization systems were analyzed.     

Carbon Composite Electrode Modified with Copper(II) Phosphate Immobilized in a Polyester Resin for Voltammetric Determination of Catechin in Teas

A carbon composite electrode modified with copper (II) phosphate immobilized in a polyester resin (Cu₃(PO₄)₂-Poly) was proposed for the voltammetric determination of catechin in teas. The modified electrode allows the determination of catechin (CAT) at lower potential than that observed at an unmodified electrode. Several parameters that can influence the voltammetric response of the proposed electrode such as carbon composite composition, pH of electrolyte, and others were investigated. The peak current was proportional to the concentration of catechin in the range from 9.9 × 10^?8 to 1.2 × 10^?6 mol L^?1, with a detection limit of 5.8 × 10^?8 mol L^?1. The stability and repeatability of the electrode for the determination of catechin were discussed, and the modified electrode was applied with success in the determination of catechin in teas.     

First preparation of a novel polyol resin for purifying arylboronic acids

A novel polystyrene-supported triol resin was first prepared by reaction of the Merrifield resin with trometamol.Using this resin, arylboronic acids were efficiently isolated and purified through a "capture-release" procedure in organic solvents.However,in basic aqueous solvents arylboronic acids were immobilized on the resin only with low yield.     

Preparation and HPLC application of chiral stationary phase from 4‐tert‐butylphenylcarbamates of cellulose and amylose immobilized onto silica gel

The 4‐tert‐butylphenylcarbamates of cellulose and amylose bearing a small amount of 3‐(triethoxysilyl)propyl residues were synthesized by a one‐pot process and efficiently immobilized onto a silica gel through intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by HPLC. The polysaccharide derivatives containing about 1–2% of the 3‐(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition ability. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran (THF), which cannot be used with the conventional coated‐type CPMs. By using these eluents, the chiral recognition for many racemates was improved.     

1‐Pyrrolidine Dicarbodithioate Based Electrodes for Determination of Iron(III) in Lubrication Oil

The lipophillic ammonium salt of 1‐pyrrolidine dicarbodithioic acid (PCDT) (I) was introduced as a new selective ionophore for an iron selective electrode. In addition, the effect of immobilization of 18‐crown‐6 (18CE6) (membrane type‐II), on the electrode performance was discussed. The slope of the PCDT‐based (I) electrode was (20 mV/decade). The linear concentration range was (10^?5–10^?1 M) after one day doping. The detection limit for electrode type‐(II) was (1.3×10^?6 M). For membrane with only 18CE6 (type‐III) the linear range and the detection limit were improved (10^?5–10^?1 M and 3.2×10^?6 M, respectively). The pH‐range was between 5–11 for type‐II, and III electrodes, while it was 7–11 for type‐I electrode. Most of the common cations were tested for the evaluation of the electrode selectivity with correlation to the ionic radii of the tested cations. Among them only Ag⁺ and Pb²⁺ were the real interference for type‐III electrode. Application of using the electrode for the determination of iron in lubrication oil samples was performed with RSD (1.77–2.7%) and (1.01–2.3%) for type‐II and III electrodes, respectively. The corresponding recovery ranges were (93.0–99.9%) and (96.3–100%). The obtained results were compared to those of an atomic absorption spectrophotometric method.     

Novel layered calcosilicate-immobilized iron-based diimine catalyst for ethylene polymerization

A novel layered calcosilicate (CAS-1) was employed to immobilize an iron-based diimine catalyst 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine iron chloride (I) onto it to form a supported catalyst (CC) for the first time. The crystal structure of CAS-1 was determined by X-ray crystallographic analysis in addition to SEM characterization. The CC-catalyzed ethylene polymerization exhibited good catalytic activities with either co-catalyst methylaluminoxane (MAO) or triethylaluminum (TEA). The resulting polyethylenes possessed not only higher molecular weight, melting temperature (T_m), and decomposition onset temperature (T_onset) than those obtained with its homogeneous counterpart, but also a unique morphology.     

Preventing inhibition of tyrosinase with modified electrodes

Wines, especially red wines, contain numerous biologically active compounds, the most important of which are polyphenols, whose nutritional importance is attributed to their antioxidant power. Because of this, the detection of the amount of phenolic compounds in red wines becomes extremely important. However, using free enzyme in the determination of phenolic compounds in wines cannot reflect the actual values since there are also naturally found inhibitors in red wines. In this study, benzoic acid, cinnamic acid, and sorbic acid were utilized to understand the behavior of immobilized polyphenol oxidase in the conducting polymer matrices toward inhibition. Cinnamic acid was found to be the most powerful inhibitor for both free and immobilized enzyme in copolymer matrix of poly(terephthalic acid bis-(2-thiophen-3-yl-ethyl) ester) (PTATE) with polypyrrole (PPy). In the case of immobilized enzyme in PPy matrix, it was observed that sorbic acid is a stronger inhibitor than cinnamic acid. The inhibitory effects of these inhibitors on PPO were compared with respect to both the structural differences of inhibitors and conducting polymer matrices.     

Preparation of particle-fixed silica monoliths used in capillary electrochromatography

Fused-silica capillarieswere packed with porous 1 microm bare silica microspheres and immobilized by potassium silicate-formamide in order to obtain columns with silica-based monolithic packing. After curing, the particle-fixed monolithic columns were octadecylated insitu with dimethyloctadecylchlorosilane. The columns were mechanically strong and permeable. No noticeable loss in efficiency was found after using a column continuously for 1 month. The performances of the particle-fixed silica monolithic columns were evaluated for CEC under RP conditions. High separation efficiency (about125 200 plates/m) was obtained by using these new types of columns.     

Immobilization of metalloporphyrins on P(4VP-co-St)/SiO2 by the quaternarization reaction

Poly(4vinylpyridine-co-styrene) (P(4VP-co-St)) was grafted on silica gel particles in the manner of “grafting from”, and the grafting particle P(4VP-co-St)/SiO₂ was gained. The chloromethylation reaction for the tetraphenylporphyrin (TPP) was performed using a chloromethylation reagent, 1,4-bis(chloromethyoxy)butane which was uncarcinogenic, and the tetra-chloromethylphenyl-porphyrin (TMCPP) was prepared. Then, the quaternization reaction between the benzyl chloride groups on TMCPP and pyridine groups of the grafted P(4VP-co-St) macromolecules occurred and the bonding of TMCPP on the particles P(4VP-co-St)/SiO₂ was realized, resulting in the functional composite-type particles TMCPP-P(4VP-co-St)/SiO₂. Subsequently, the metallation of the bonded particles TMCPP-P(4VP-co-St)/SiO₂ was carried out via the coordination reaction between TMCPP-P(4VP-co-St)/SiO₂ and metal salt, resulting in the supported metalloporphyrin (MP) catalysts MP-P(4VP-co-St)/SiO₂. The supported catalysts were characterized by UV-Vis spectra. The effects of various factors on the bonding process of TMCPP on P(4VP-co-St)/SiO₂ were studied in detail. In addition, the catalytic activity of the supported catalysts MP-P(4VP-co-St)/SiO₂ have been studied in oxidation process of ethyl benzene with molecular oxygen to acetophenone without the use of sacrificial co-reductant. The experimental results showed that the tetra-chloromethylphenyl-porphyrin (TMCPP) could be successfully bonded onto the P(4VP-co-St)/SiO₂ surfaces by means of the quaternization reaction between TMCPP and the pyridine groups on grafted P(4VP-co-St) macromolecules. The supported catalysts MP-P(4VP-co-St)/SiO₂ exhibited the fine catalytic activity. Moreover, the supported cobalt porphyrin was more active than the supported iron and manganese porphyrins.