制备工艺对电子俘获材料性能的影响

利用等离子体质谱(ICP-MS)技术测试了硫化助熔剂法和稀土直接掺杂工艺合成电子俘获材料的化学计量比,结果表明,采用稀土直接掺杂工艺合成材料的化学计量比更接近设计值;通过分析电子俘获材料的发光机制和光谱测试结果,讨论了制备工艺条件对电子俘获材料中稀土离子化合价的影响.     

A levitation technique for determining particle hydrophobicity

A new technique designed to evaluate the hydrophobicity of fine particles is described. Results of the hydrophobicity measurements correlate well with those of the Hallimond tube flotation tests both in triply distilled water and in 1·10⁻³ mol dm⁻³ AlCl₃ solution. Experimental error analysis indicates that this technique is more sensitive for detecting small changes in the hydrophobicity than the Hallimond tube tests used for determining floatability.     

Geometric-optical reconstruction of a wavefront experimental realization with femtosecond laser pulses

The mechanism of wavefront reconstruction by geometric-optical reflection of reconstruction radiation from surfaces with constant phase differences between the object and reference waves has been investigated. The main difference between this mechanism and a holographic one is the absence of diffraction of the reconstructing radiation by the periodic structure and as a consequence the achromatism of the reconstruction process. Incoherent continuous radiation and ultrashort laser pulses were used in the experiments. The effect of achromatic reconstruction has been obtained after recording the interference of counterpropagating 30–40 fs pulses from an Al₂O₃:Ti³⁺ laser in bulk media.     

Analysis of Digital Lateral Shearing Interferometer

A new method is proposed for reconstructing wavefront from discretely sampled interferogram data obtained by a digital lateral shearing interferometer. Assumptions applied in the conventional methods are not used and reconstruction error caused by the difference between the amount of shear and the sampling interval can be removed. System error and the influence of the discrete sampling, which limit accuracy of the tested results of the lateral shearing interferometer, are analyzed.     

一种基于Zernike多项式的波前探测和重构方法

运用Ｎｏｌｌ建议的Ｚｅｒｎｉｋｅ多项式形式表征大气扰动的波面，求出由两个离焦面上的光强分决定的Ｚｅｒｎｉｋｅ多项式的前ｎ项在特定的探测器上的响应矩阵Ｒ。由Ｒ和输入的随机波面在两个离焦面上的光强分布，可方便地求出其Ｚｅｒｎｉｋｅ多项式的系数，从而实现了波前的探测和重构。采用光线追迹的变方法，用计算机模拟验证了这种方法的原理和可行性。     

热重分析技术研究聚-α-甲基苯乙烯降解温度

采用热重分析技术研究了4种聚-α-甲基苯乙烯原料和其它微球壳层材料的热降解温度。研究表明,聚-α-甲基苯乙烯原料主要失重温度范围为220～340℃,等离子体辉光放电涂层材料的降解温度为350～450℃。升温速率在20℃/min和30℃/min时,降解温度基本相同,升温速率不影响降解的温度范围,低于20℃/min时,随着升温速率升高,降解温度升高。     

基于最小区域的锥束ART算法快速图像重建

针对锥束ART算法重建速度慢的问题,考虑到工业CT重建目标尺寸差异较大的特点,提出了一种基于最小重建区域的快速三维图像重建方法。由不同视角下的锥束投影构建最小区域包络,对最小区域包络进行膨胀处理,以消除重建目标边界附近所出现的伪影,在此基础上,给出了射线穿过最小重建区域的体素索引及权因子的计算。该方法能够根据重建目标的尺寸自适应地确定最小重建区域,从而最大限度地减少了计算量。实验结果表明,该方法不仅大幅度提高了锥束ART算法的重建速度,而且有效地提高了重建质量。     

Structure of Reconstructed Cu(100) Surface Induced by Dissociative Adsorption of Gaseous Oxygen

用低能电子衍射(LEED)和扫描隧道显微镜技术研究了氧气在Cu(100)表面化学吸附所形成的表面重构结构．在低覆盖度下,实验上观察到了两个有序重构的混合相,分别为c(2×2)O重构和(√2×2√2)R45°-O重构．在氧原子的覆盖度逐渐增加的过程中,c(2×2)O重构区域的面积逐渐减小．在初始氧化阶段,实验上观察到了呈条状的“锯齿”形的重构结构,这些锯齿形的结构是由相邻的局域化的c(2×2)区域的边界区域(Cu)构成的．STM实验发现,相对于其他重构区域,这些锯齿形的重构区域与有机分子之间存在更加强烈的相互作用．通过分析在不同退火温度下样品LEED衍射点的变化,研究了重构结构的热稳定性,发现三种结构的热稳定性顺序是：锯齿结构>c(2×2)O重构>(√2×2√2)R45°-O重构．     

基于均值漂移和模糊积分融合的高光谱图像分割

针对高光谱图像的特殊性,给出了一种基于均值漂移和模糊积分融合的高光谱图像分割算法。依据高光谱图像各波段间高度的相关性将其分为若干组,通过主成分分析对各波段子集进行降维。在此基础上,采用均值漂移算法计算各波段子集图像的聚类中心进而实现分割,再利用模糊积分融合各波段子集的分割结果。仿真结果证明了该算法的有效性。     

An algorithm for computed tomography image reconstruction from limited-view projections

<正>With the development of the compressive sensing theory,the image reconstruction from the projections viewed in limited angles is one of the hot problems in the research of computed tomography technology.This paper develops an iterative algorithm for image reconstruction,which can fit most cases.This method gives an image reconstruction flow with the difference image vector,which is based on the concept that the difference image vector between the reconstructed and the reference image is sparse enough.Then the l_2-norm minimization method is used to reconstruct the difference vector to recover the image for flat subjects in limited angles.The algorithm has been tested with a thin planar phantom and a real object in limited-view projection data.Moreover,all the studies showed the satisfactory results in accuracy at a rather high reconstruction speed.