Multidynamic Crystalline Molecular Rotors Comprising an N-Heterocyclic Carbene Binuclear Au(I) Complex Bearing Multiple Rotators

We report multidynamic molecular rotations in crystals using a concave-shape N-heterocyclic carbene (NHC) binuclear Au(I) complex rotor bearing pyrazine and tetrahydrofuran (THF) molecules as multicomponent rotators. Single-crystal X-ray diffraction (XRD) measurements revealed that two THF molecules are located near the central pyrazine encapsulated by two bulky NHC ligands. From ²H solid-state NMR analysis, it was observed that the pyrazine rotated in a 2-fold site exchange with a 180° rotational angle and a 31 kJ mol⁻¹ energy barrier, while the THF molecules showed a 23°-38° libration with a lower energy barrier (14 kJ mol⁻¹). Interestingly, the pyrazine rotation was accelerated when the THF molecules rotated in fast site exchange with a large angle of libration, suggesting that the rotators exhibit multidynamics in a correlated manner.     

N-苯基苯二甲酰亚胺和2-苯基喹噁啉晶态分子动力学行为研究

本文在晶体结构分析的基础上, 对二个芳香杂环高聚物模型化合物N-苯基苯二甲酰亚胺和2-苯基喹噁啉分子的原子热振动参数进行分析, 结果表明N-苯基苯二甲酰亚胺晶态分子基本上为刚性分子, 而2-苯基喹噁啉分子的热振动应包含分子内取代苯基的内旋转运动, 其平均平方振幅为53(25) deg~2。     

Lamellar thickening in nascent poly(acrylonitrile) upon annealing

No systematic study has been reported on the lamellar thickening in atactic poly(acrylonitrile) (PAN) upon annealing because PAN, in the form of solution‐cast films or their drawn products, generally shows no small‐angle X‐ray scattering (SAXS) maximum corresponding to the lamellar thickness. In this work, PAN crystals were precipitated during the thermal polymerization of acrylonitrile in solution. The nascent PAN film, obtained by the filtration of the crystal suspension, exhibited a clear SAXS maximum revealing the lamellar structure. The lamellar thickening upon annealing of the nascent PAN films was studied in the temperature range 100–180 °C, where the degradation was minimal, as confirmed by the absence of an IR absorption band at 1605 cm⁻¹ ascribed to the cyclized nitrile groups. Above 190 °C, the degradation of the samples was significant, and the SAXS became too broad to determine the scattering maximum. The long period was significantly affected by the annealing time (t_a) and the temperature (T_a). Depending on t_a, three stages were observed for the lamellar thickening behavior. The lamellar thickness stayed constant in stage I (t_a = 0.5–3 min, depending on T_a), rapidly increased in stage II (t_a = 0.5–8 min), and stayed at a constant value characteristic for each T_a at yet longer t_a's in stage III. The lamellar thickness characteristic for T_a increased rapidly with increasing T_a at 165 °C (or higher), which was 152 °C lower than the estimated melting temperature of PAN (T_m = 317 °C). A possible mechanism for such lamellar thickening in PAN far below the T_m is discussed on the basis of the enhanced chain mobility in the crystalline phase above the crystal/crystal reversible transition at 165–170 °C detected by differential scanning calorimetry and wide‐angle X‐ray diffraction. The structural changes associated with annealing are also discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2571–2579, 2000     

Influence of physical properties and operating parameters on hydrodynamics in Centrifugal Partition Chromatography

Besides the selection of a suitable biphasic solvent system the separation efficiency in Centrifugal Partition Chromatography (CPC) is mainly influenced by the hydrodynamics in the chambers. The flow pattern, the stationary phase retention and the interfacial area for mass transfer strongly depend on physical properties of the solvent system and operating parameters. In order to measure these parameters we visualized the hydrodynamics in a FCPC-chamber for five different solvent systems with an optical measurement system and calculated the stationary phase retention, interfacial area and the distribution of mobile phase thickness in the chamber. Although inclined chambers were used we found that the Coriolis force always deflected the mobile phase towards the chamber wall reducing the interfacial area. This effect increased for systems with low density difference. We also have shown that the stability of phase systems (stationary phase retention) and its tendency to disperse increased for smaller values of the ratio of interfacial tension and density difference. But also the viscosity ratio and the flow pattern itself had a significant effect on retention and dispersion of the mobile phase. As a result operating parameters should be chosen carefully with respect to physical properties for a CPC system. In order to reduce the effect of the Coriolis force CPC devices with greater rotor radius are desirable.     

从高分子运动的温度依赖关系看高分子运动特点

高分子的运动是高分子科学中最为基本、最为重要的问题之一,也是教学的重点之一,它是联系高分子微观结构与高聚物宏观性能之间的桥梁,本文就高分子运动的特点尤其是高分子运动的温度依赖关系进行了讨论,进而从本质上理解高聚物结构与性能之间的关系.     

Dynamical Aspects of TEM-1 β-Lactamase Probed by Molecular Dynamics

The dynamical aspects of the fully hydrated TEM-1 β-lactamase have been determined by a 5 ns Molecular Dynamics simulation. Starting from the crystallographic coordinates, the protein shows a relaxation in water with an overall root mean square deviation from the crystal structure increasing up to 0.17 nm, within the first nanosecond. Then a plateau is reached and the molecule fluctuates around an equilibrium conformation. The results obtained in the first nanosecond are in agreement with those of a previous simulation (Diaz et al., J. Am. Chem. Soc., (2003) 125, 672–684). The successive equilibrium conformation in solution shows an increased mobility characterized by the following aspects. A flap-like translational motion anchores the Ω-loop to the body of the enzyme. A relevant part of the backbone dynamics implies a rotational motion of one domain relative to the other. The water molecules in the active site can exchange with different residence times. The H-bonding networks formed by the catalytic residues are frequently interrupted by water molecules that could favour proton transfer reactions. An additional simulation, where the aspartyl dyad D214–D233 was considered fully deprotonated, shows that the active site is destabilized.     

Multispectral and hyperspectral image analysis of elemental and micro-Raman maps of cross-sections from a 16th century painting

Spectroscopic imaging is well suited to the study of micro-samples from artworks, where the sample material is limited and the maximum amount of information needs to be obtained. In this study, a new approach to imaging elemental data from energy dispersive X-ray analysis maps was used in conjunction with micro-Raman spectroscopic imaging to characterise the paint layers within micro-samples. Cross-sections from the 16th century painting Portrait of a Youth were found to contain vermilion, lead-tin yellow type 1 and a blue-green pigment consistent with terre-verte. The mid-preparatory layer (imprimatura) contains a high proportion of elements and mineral inclusions that indicates a clay-type composition. The ground layer was identified as anhydrite with large gypsum inclusions. The pigments and composition of the preparatory layers are consistent with those used by Italian Renaissance artist Dosso Dossi.     

Prediction of intracellular storage polymers using quantitative image analysis in enhanced biological phosphorus removal systems

The present study focuses on predicting the concentration of intracellular storage polymers in enhanced biological phosphorus removal (EBPR) systems. For that purpose, quantitative image analysis techniques were developed for determining the intracellular concentrations of PHA (PHB and PHV) with Nile blue and glycogen with aniline blue staining. Partial least squares (PLS) were used to predict the standard analytical values of these polymers by the proposed methodology. Identification of the aerobic and anaerobic stages proved to be crucial for improving the assessment of PHA, PHB and PHV intracellular concentrations. Current Nile blue based methodology can be seen as a feasible starting point for further enhancement. Glycogen detection based on the developed aniline blue staining methodology combined with the image analysis data proved to be a promising technique, toward the elimination of the need for analytical off-line measurements.     

Brownian diode: Molecular motor based on a semi-permeable Brownian particle with internal potential drop

A model of an autonomous isothermal Brownian motor with an internal propulsion mechanism is considered. The motor is a Brownian particle which is semi-transparent for molecules of surrounding ideal gas. Molecular passage through the particle is controlled by a potential similar to that in the transition rate theory, i.e. characterized by two stationary states with a finite energy difference separated by a potential barrier. The internal potential drop maintains the diode-like asymmetry of molecular fluxes through the particle, which results in the particle?s stationary drift.     

Two stage electrostatic separator for the recycling of plastics from waste electrical and electronic equipment

The aim of study was to evaluate the effectiveness of a new facility for recycling of plastics from granular waste electrical and electronic equipment. The installation consists of two sections, the products of a first tribo-aero-electrostatic separator being subsequently treated in two free-fall electrostatic separators. The tests were performed on a mixture of polycarbonate (PC) and polyamide (PA). Analysis of the purity of the products obtained was performed using a program of image processing in MATLAB. Products of very high purity (roughly 95% for both PC and PA) were obtained at a recovery rate higher than 70%.