Free energies of transfer of complexes of the type MCl2py4 between pyridine and other solvent media

Solubility isotherms are reported for the NiCl₂·4py, MnCl₂·4py, and MnCl₂·2py solid pyridinates in a number of pyridine+diluent mixtures at 25°C. Activity coefficients of the solvent components have been derived from the total vapor pressures measured by a static method. The standard free energies of transfer for the NiCl₂py₄ and MnCl₂py₄ complexes are the same, within the experimental error, in the pyridine+aprotic diluent mixtures, while marked differences are observed in the pyridine+chloroform mixtures. Marked deviations are observed for chloroform and 1,2-dichloroethane from a correlation between the standard free energy of transfer of the complexes, on one hand, and the Hildebrand's solubility parameter of the solvent, on the other, the latter correlation being roughly valid for aprotic solvents. The deviations are tentatively ascribed to hydrogen bond formation of the type H... between the protic solvents and the coordinated pyridine molecules, enhanced by the d electron delocalization.     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.     

Theoretical study of the reaction of alkynes with furan catalyzed by AuCl3 and AuCl

A general scheme for the endo‐ and exo‐cyclization of furan reactivity with [L ‐Au^{III, I}Cl_x] with (x = 3, 1 and L ‐acetylene and vinylidene) complexes is investigated using density functional theory (DFT) code. Two conceivable mechanisms via a [4 + 2] Diels–Alder process or carbene complex are analyzed. According to the activation energy values of the gold (III and I) catalyst, the first mechanism, which implies the Diels–Alder reaction of Au^III, is thermodynamically favored and gives more evidence of the intramolecular addition of the furan with the alkynes. The second mechanism, presumably assisted by the spontaneous formation of the exo‐vinylidene complexes and intermediates of gold (III, I) by forming the carbene complex, is kinetically favored. Additionally, we compare our results with other structures with intramolecular additions that exhibit the quasi‐similarity of gold analogue structures. Differences in activation energies are observed, according to the functional used. Finally, we probe the solvent effects, which decrease the energy barrier in the path. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

CnBδ(δ=0, ±1; n =1～6)团簇的结构、稳定性和光谱

采用密度泛函理论(DFT)的B3LYP方法,在6-31G*和6-311＋G(3df)水平上对C_nB(n=1～6)团簇及其阴离子和阳离子的几何构型和电子结构进行了优化和振动频率计算.得到了C_nB(n=1～6)团簇的电离能,绝热电子亲合势以及C_nB^δ(δ=0,±1)团簇的能隙.结果表明C_nB^－(n=1～6)团簇的基态构型均为线形,这与等电子的C_n簇合物的结构是一致的; C_nB(n=1～6)团簇的基态构型中,除C₂B为不对称的三角形,C₆B为具有C_2v对称性的环状结构外,其余均为线形结构.阳离子团簇中n=2、3、6的基态结构具有C_2v对称性外,其它几个均为线形结构.从几何参数和振动频率上发现,采用密度泛函B3LYP方法在6-311＋G(3df)和6-31G*两种基组上计算得到的键长参数和振动频率非常接近,说明B3LYP方法在计算C_nB簇合物结构参数上对于基组的选择是不太敏感的.通过对C_nB(n=1～6)的光电子能谱性质的研究发现,C₄B容易获得一个电子形成阴离子团簇,但失去一个电子是很困难的,这与实验上观测到的结果非常吻合.     

计及位置不确定的喷雾机喷杆系统仿形姿态渐近跟踪控制北大核心CSCD

针对喷雾机喷杆仿形系统中同时存在负载变化、未建模不确定项、物理参数摄动以及外部干扰等问题,提出了一种基于小波网络逼近的具有自适应性和鲁棒性的反步控制方法.首先,将含有不确定、未知和非线性项的喷杆仿形系统建立为完整的数学模型,将其等价转化为具有严格反馈的状态空间形式;其次,采用设计的小波基元去构造神经网络,在满足最优误差有界条件下逼近反步法中虚拟等效控制部分,选取自适应更新律估计系统中存在的未知参数,引入鲁棒补偿项减小复合干扰对系统的不利影响,降低了输入指令信号的阶次要求;最后,通过构造合适的Lyapunov函数,应用稳定性理论证明了闭环系统位置跟踪误差渐近收敛到原点.仿真结果表明,所提控制方法可实现喷雾机喷杆位置姿态快速升降机动调整,有效地增强了喷杆系统的鲁棒稳定性和控制精度.     

A High-Order Finite Difference Scheme for 3D Unsteady Convection Diffusion Reaction Equations北大核心CSCD

针对三维非稳态对流扩散反应方程,构造了一种高精度紧致有限差分格式,对空间的离散采用四阶紧致差分方法,对时间的离散采用Taylor级数展开和余项修正技术,所提格式在时间上的精度为二阶、在空间上的精度为四阶。利用Fourier稳定性分析法证明了该格式是无条件稳定的。最后给出数值算例验证了理论结果。     

Extrapolated Smoothing Descent Algorithm for Constrained Nonconvex and Nonsmooth Composite Problems*

In this paper, the authors propose a novel smoothing descent type algorithm with extrapolation for solving a class of constrained nonsmooth and nonconvex problems,where the nonconvex term is possibly nonsmooth. Their algorithm adopts the proximal gradient algorithm with extrapolation and a safe-guarding policy to minimize the smoothed objective function for better practical and theoretical performance. Moreover, the algorithm uses a easily checking rule to update the smoothing parameter to ensure that any accumulation point of the generated sequence is an (affine-scaled) Clarke stationary point of the original nonsmooth and nonconvex problem. Their experimental results indicate the effectiveness of the proposed algorithm.     

考虑订单取件时间和柔性时间窗的取送货车辆路径问题

研究了同城配送中考虑订单取货时间和柔性时间窗的取送货车辆路径问题,考虑同城配送中订单起终点,订单取货时间和订单配送的柔性时间窗,车容量限制等因素。首先构建以配送成本与超时惩罚成本之和最小化为目标的混合整数线性模型。其次,设计了含多种有效不等式及其对应分离算法的改进分支切割算法对该模型进行精确求解。最后通过实验测试分析了不等式的性能,验证了算法的有效性,实验表明适当的减少车辆数和增大装载能力能够有效的减少成本。